Moes WRS-EUC-3D-BK-MS Wi-Fi Curtain Switch Instruction Manual

: June 13, 2024
: MOES

Table of Contents

Moes WRS-EUC-3D-BK-MS Wi-Fi Curtain Switch
Product Information
Product Technical Parameters
Safety Information
Product Usage Instructions
Product Description
Safety Information
Technical Parameters
Installation
Preparation For Use
FAQ
SERVICE
RECYCLING INFORMATION
WARRANTY CARD
Maintenance Records
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Moes WRS-EUC-3D-BK-MS Wi-Fi Curtain Switch

Product Information

This is a Smart Curtain Switch by MOES HOME. It is a Wi-Fi+RF enabled switch that can easily replace traditional switches. The switch is designed with a glass panel and has several new updates. It offers multiple ways to control and can be associated with other smart switches using the Tuya Smart Life App. The switch also features a backlight on/off function and relay status indication when power is off. Its scratch-resistant glass panel makes it suitable for various decoration styles.

Product Technical Parameters

Model: WS-USR-C / WS-EUR-C
Working Voltage: 90-250V AC, 50/60Hz
Max. Current: 2.5A/Gang; Total 2.5A
Load Power: 600W
Standby Power: 0.5W
Wireless Protocol: Wi-Fi 2.4GHz IEEE 802.11 b/g/n
Standby Consumption: 0.1mA
Wireless Range: 30 Meters (Indoor)

Safety Information

Risk of Electric Shock: Electricity can cause personal injury and property damage if handled improperly. If you are not sure about any part of these instructions, please seek professional assistance from a qualified Electrician
Do not disassemble, reassemble, modify, or attempt to repair the product by yourself.
This product has no waterproof and dustproof function.

Transportation: The products should be handled with care during transportation. They should be protected from severe vibration, impact, exposure to rain, dumping, and other problems. The packaging boxes should comply with the provided markings.

Storage: The products should be stored in a warehouse with a temperature range between -10°C and +45°C and a relative humidity of 70%RH. The indoor environment should be free from acid, alkali, salt, corrosive, explosive gas, flammable matter, dust, rain, and snow.

Product Usage Instructions

Step 1: Remove the old switch

Turn off the power by switching off the circuit breaker(s) connected to the switch.
Remove the faceplate from the old switch.
Use an electrical tester to ensure there is no voltage in the circuit.
Remove the switch from the wall by pulling it away.

Step 2: Take pictures of the wiring

Take pictures of the wiring before proceeding to ensure correct connections.

Step 3: Connect the new switch

Refer to the wiring diagram provided in the manual.
Connect the switch wires to the wires in the wall box using the wire conductors.

Method One: Wi-Fi Setup

Ensure your phone is connected to Wi-Fi and Bluetooth.
Open the MOES App.
Click the “+” icon in the upper right corner.
Select “Add Device” and wait for the device to appear in the discovered devices list.
Click “Add” to add the device to your network.

Method Two: Reset and Pair

Ensure your phone is connected to Wi-Fi and Bluetooth.
Press the switch button 6 times, and on the 6th press, hold it until the blue indicator on the switch flashes fast.
Release the button.
Open the MOES App.
Click the “+” icon in the upper right corner.
Select “Add Device” and wait for the device to appear in the discovered devices list.
Click “Add” to add the device to your network.

Connecting to Alexa:

In the Smart Home page of the MOES App, group your devices into different categories.
Your MOES APP has now been paired with Alexa.
You can now control your Smart star projector through Alexa.

Connecting to Google Home:

Launch the Google Home App and ensure the Google Home speaker is installed. If not, follow the Google Home speaker installation instructions to complete the installation.
Your Smart star projector can now be connected to Google Home.

Product Description

Transportation： The products shall be free from severe vibration,impact, exposure to rain, dumping and other problems during transportation, and shall comply with the provisions of the marks on the packing boxes.

Safety Information

Risk of Electric Shock: Electricity can cause personal injury and property damage if handled improperly. If you are not sure about any part of these instructions, please seek professisonal assistance from a qualified Electrician.
Do not disassemble, reassemble, modify, or attempt to repair the product by yourself.
This product has no waterproof and dustproof function.

Storage：

Products should be put in the warehouse where the temperature is between the range -10℃ ~ +45℃,and the relative humidity ≤70%RH, indoor environment with no acid, alkali, salt and corrosive, explosive gas, flammable matter, protected from dust, rain and snow.

Technical Parameters

Model: WS-USR-C / WS-EUR-C
Working Voltage: 90-250V AC, 50/60Hz
Max. Current: 2.5A/Gang; Total 2.5A
Load Power: ≤600W
Standby Power: ≤0.5W
Wireless Protocol: Wi-Fi 2.4GHz IEEE 802.11 b/g/n
Standby Consumption: 0.1mA
Wireless Range: 30 Meters(Indoor)

Warnings: Turn off the power at the circuit breaker and test that power is off before wiring.

Installation

Note:

Make sure that the power at the circuit breaker is off before wiring.
Neutral Wire is required.Confirm the wall box contains a
Neutral Wire(typically white).If the wall box don’t have a
Neutral Wire,please try another location at your home or call a professional electrician to install the switch.
The wire colors indicated in this manual are the usual colors and may differ in some houses.
Ensure the wire conductors are securely fastened to each wire.
Ensure the Wi-Fi signal is steady and normally working before wiring.
If you don’t have any wiring experience,please call a professional electrician.

Step 1
- Turn off the circuit breaker and use the electrical tester to test the power.
- Ensure the circuit breaker is off before wiring.
- Attention: Please disconnect the power supply before installing or removing the device for avoiding irreversible damage on the device from the electric current or some unpredictable problems such as lamp flashing.
Step 2
- Remove the old switch
Step 3
- Remove the switch and pull it away from the wall. Identify Line/Load Wire(Note:The color of your wire may be different from the color shown on the manual.)
  Verify power is off
- We recommend you remove the faceplate from the old switch and use an electrical tester to test all wires connected to the switch to ensure there is no voltage in the circuit.
- You may need to turn off more than one circuit breaker.
Step 4
- Take pictures of the wiring
- Follow the wiring diagram to connect the switch wires to the wires in the wall box with the wire conductors.
Step 5
- Open the switch panel from the bottom of the switch with a screwdriver
- Mount the switch with the provided screws and snap the wall plate on it.
Step 6
- Turn the power back on at the circuit breaker and then switch the light on.

Preparation For Use

D1ownload MOES App on App store or scan the QR code
- MOES App is upgraded as much more compatibility than Tuya Smart/Smart Life App, functional well for scene controlled by Siri, widget and scene recommendations as the fully new customized service.
- ( Note: Tuya Smart/Smart Life App still works, but MOES App is highly recommended)
Registration or Log in
- Download “MOES” Application.
- Enter the Register/Login interface; tap “Register” to create an account by entering your phone number to get verification code and “Set password”. Choose “Log in” if you already have a MOES account.

Steps for connecting the APP to the device

Method One:

Make sure your phone is connected to Wi-Fi and Bluetooth.
Scan the QR code to configure the network guide.

Method Two:

Make sure your phone is connected to Wi-Fi and Bluetooth.
Reset: Press the switch button for 6 times,and hold on the 6th time,then release until the blue indicator on the switch flashes fast.Pair/Reset is successful.
Open the MOES App, click the “+” in the upper right corner, enter “Add Device”, the device will appear in “discovering devices”, click “Add”
Enter Wi-Fi Password and click “Next”,waiting for completing the connection.Add the device successfully, you can edit the name of the device to enter the device page by click “Done”.
enjoy your smart life with home automation.

How to pair/reset Wi-Fi
Press the switch button for 6 times,and hold on the 6th time,then release until the blue indicator on the switch flashes fast.Pair/Reset is successful.

Remote radio frequency(RF)link method: Pair and clear up the RF code

How to pair the RF code
Press and hold the device touch button for more than 5 seconds until you see the blue indicator of the button blinking. Enter Remote Radio Frequency (RF) pairing, and then click the corresponding button on the remote control to successfully pair.
- Note: This operation can only pair one button
How to clear up the RF code
Press and hold the device touch button, and the indicator light flashes. Do not release your finger until the indicator light stops flashing and the code is cleared successfully
- Note: This operation can only clear one button,repeat the operations for clearing other codes.

FAQ

After the device is installed, why does the light not respond when I click the switch button?
A: Please cut off the power supply and check whether the connect correct according to the instructions. re the APP
Why is there no reset button on my switch?
A: Hello, generally speaking, the reset button of the switch device is the switch button itself. You can press the switch button to configu according to the instructions.The power indicator light will start to blink when entering into successful pairing mode.
What if my smart switch malfunctions and doesn’t respond for a long time?
A: Hello, please try to reset the device. Firstly remove the smart switch from your APP and re-configure the network for use.

How to connect Smart Star Projector to Amazon Alexa

Launch MOES App, sign into your account and make sure Smart star projector is on the device list
Minimize MOES App, then launch the Alexa App and sign in your Alexa account and make sure you have at least one Alexa smart speaker-controlled device installed like Echo dot, etc.
In the upper left corner of Home page, press the button to show APP Menu. Then select in the menu.
Type in “ MOES “in the search and press the search button next to it.
Enable MOES Smart Skill then sign in your Smart Life account to complete your account set up.
Once your account has been successfully linked, ask Alexa to discover devices. After a 20-second searching, Alexa will show all the available devices
In the Smart Home page, you can group your devices in different categories. Your MOES APP has now been paired with Alexa. Now you can control your Smart star projector through Alexa.

How to connect Smart star projector to Google Home

Launch the Google Home App and make sure Google Home speaker is installed. If not, please follow Google Home speaker installation instruction to complete the installation.
Once Google Home is installed, in the upper left corner of App Home page, Pressing button to show App menu.Then press“Home Control”in the menu.
After successfully linking your account, in the Google Home App you can see all your smart devices from your MOES App account. You can assign rooms for each device.
Now you can use Google Home to control your smart device, you can say like.
- Ok Google, turn on/off wall light red
- Ok Google, set bedroom light to $Moes-WRS-EUC-3D-BK-MS-Wi-Fi-Curtain-Switch-FIG-1 $26$$

SERVICE

Thank you for your trust and support to our products, we will provide you with a two-year worry-free after-sales service (freight is not included), please do not alter this warranty service card, to safeguard your legitimate rights and interests.
If you need service or have any questions, please consult the distributor or contact us.
Product quality problems occur within 24 months from the date of receipt, please prepare the product and the packaging, applying for after-sales maintenance in the site or store where you purchase; If the product is damaged due to personal reasons, a certain amount of maintenance fee shall be charged for repair.

We have the right to refuse to provide warranty service if:

Products with damaged appearance, missing LOGO or beyond the service term
Products that are disassembled, injured, privately repaired, modified or have missing parts
The circuit is burned or the data cable or power interface is damaged
Products damaged by foreign matter intrusion (including but not limited to various forms of fluid, sand, dust, soot, etc.)

RECYCLING INFORMATION

All products marked with the symbol for separate collection of waste electrical and electronic equipment (WEEE Directive 2012/19 / EU) must be disposed of separately from unsorted municipal waste. To protect your health and the environment, this equipment must be disposed of at designated collection points for electrical and electronic equipment designated by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences for the environment and human health. To find out where these collection points are and how they work, contact the installer or your local authority.

WARRANTY CARD

Product Information
Product Name____
Product Type_____
Purchase date____
Warranty Period___
Dealer Information_____
Customer’s Name_____
Customer Phone__
Customer Address_____

Maintenance Records

Failure date
Cause Of Issue
Fault Content
Principal

Thank you for your support and purchase at we Moes, we are always here for your complete satisfaction, just feel free to share your great shopping experience with us. If you have any other need, please do not hesitate to contact us first, we will try to meet your demand.

FOLLW US