sparco Gruppe 3 Booster Seat Instruction Manual
- June 13, 2024
- sparco
Table of Contents
Booster Seat
Instruction Manual
ECE R44/04
GROUP
Safety
Please read this user guide carefully before install the child seat and for future reference.
- The child safety seat s suitable for children from 22kg to 36k
- Please read this instruction carefully otherwise incorrect installation will cause seriously hurt. In this case. The manufacturer will not take any responsibility.
- This child seat s suitable for conventional use i all cars equipped with 3 point seat belts that are fitted in accordance with European 3. standard (ECE16 or equivalent standard), only fasten by abdomen belts not allowed.
- In any circumstance, the child seat can not be used in the front passenger seat with an active airbag.
- Please don’t use the child seat without the cover and chest pad
- Avoid the direct sunlight from the child seat in case the high temperature hurt the child.
- Seat and harness assemblies which get damaged or become badly must be replaced,
- Do not place heavy objects on the parcel shelf, Which could, in the event of an accident, cause injury to the child
- Make sure any part of the vehicle is not twisted by the folding door, and make sure the child seat s locked correctly.
- Do not attempt to modify or add to any part of the child seat Otherwise it will seriously affect tsp. safety and function.
- If there were no children placed in the child seat. The child seat still should be fastened by the vehicle safety belt, a child must never be left unattended with restrained, in or out of the vehicle.
- 1f you have any question about the using and installation of the child seat. Please contact our service: markeling@carpadesign.net
- Keep the child seat away from the corrosive.
- The manufacturer guarantees the quality of the products. But not for the second hands product.
- This child seat has been designed for the European market and conforms to the car seat regulations currently in force: Europe- an Union ECE R44. PLEASE NOTE that this seat doesn’t meet the USS. regulation,
Vehicle Application
This
child seat is suitable conventional use i all cars equipped with 3 point seat
belts that are fitted in accordance with European standard (ECE-16 or
equivalent standard)
Important: The child seat must only be installed using a lap and diagonal
seat belt.
Warning: Under no circumstances, should any child car seat be used on
front passenger seat with an active airbag
Not to be used on this seat if a Passenger front airbag is active.
Only use on this Seat if a lap and diagonal Seat belt s fitted.
Know your new hoopster seat
- Shoulder strap guide
- Shoulder strap adjuster
- Shoulder strap
- Armrest
- Cover
Installation
Place the booster in your car and make sure that it is closely against the
backrest of passenger seat.
Set your child on the booster. Adjust the shoulder strap adjuster(2)to make
sure the shoulder strap(3) is long enough for the red shoulder strap guide(T)
to lie on your child’s shoulder.
Fasten the seatbelt across your chide The lap section of the belt should sit
as forward as possible over the hips and pass under the armrests(4) on either
side of the booster, then buckle up. Adjust the seat-belt to fit your child’s
body, and remove the slack as must as possible, and make sure the seat-belt s
not twisted.
Attach the red shoulder strap guide to the diagonal section of the seat-belt.
Make sure that you attach it just above your Childs shoulder as shown left.
This ensures that the seat-belts sits correctly over your child’s shoulder and
not across their neck. Your child now is secured. To release your child simply
undo the seat belt.
Cleaning the cover
The cover is washable. To remove the cover, put elastic strips away from the
hook underneath the booster. Please read the washing label on the cover for
the washing instructions.
DO NOT tumble dry the cover, drip dry only.
To replace the cover, position on the booster, and put the elastic strips back
to the hooks.
Further advice
If you need further help or advice on using or fitting the booster, please contact local dealer.
Cleaning & Maintenance
Important: The cover is a safety feature. Never use the child seat
‘without it. Don’t put your child’s safety at risk by using other makes of
replacement cover, could stop the child seat form protecting your child as
wells it should.
Washing instruction: The cover is removable and washable at 30°C, line
dry only.
European safety child seat is sweeping the whole world now
European safety standard
According to the product’s quality, the requirements of the safety child seats is much more higher in the European county. The latest ECE R44/04 standards went into effect at June of 2006, the standard high tested by more realistic collision testing. Makes more strict stipulates for the head protection and safety belt system etc… make it as the most strictest standard in the world
LICENSED BY (Sparco)®
Produced and distributed under Sparco’s licence by:
CAR PARTS DESIGN TRADING CO., LTD.
21st Floor Tai Yau Building 181
Johnston Road Wanchai. Hong Kong
marketing@carpadesign.net
www.sparco-kids.com