sparco Gaming SPHEADPHONEPRO Stereo Headphones Instruction Manual

June 11, 2024
sparco Gaming

sparco Gaming logo

Instruction manual
STEREO HEADPHONES Model: SPHEADPHONEPRO
Rev00 – 31.08.2022

SPHEADPHONEPRO Stereo Headphones

**** Please read this manual and pay attention to the safety warnings before using the product
Keep the manual to have the possibility to consult it at a later time, or in case of passing the product to a third party. BSC S.p.A. can not in any way be held responsible for injury or damage caused to people or things resulting from improper use of the product.

Safety rules

Avoid listening at volumes that are too loud, especially for prolonged periods while using the product.
Do not point the light of the product into your eyes at too close a distance.
If you use the product at an excessive volume, it could permanently damage your hearing. Listen at a moderate volume.
Audio alerts, warnings, and environmental noises may sound different when using the product.
Be aware of how these signals differ in terms of sound so that you can recognize the signals in corresponding situations.
Do not use the product while driving motor vehicles, cycling, using machines or in other situations where the sensitivity of noises in your surroundings could affect you or others. At the same time, also observe the laws and regulations of the country where the product is used.
Arrange the cable so that there is no risk of tearing.
Keep the cable away from sharp edges and hot areas, avoiding crushing it. To avoid malfunction or damage to the product, avoid accidental falls, do not crush, puncture or exert a high level of pressure on the product. Keep the product away from moisture, water or other liquids.
Do not store or expose the product to any heat source, direct sunlight, radiators, stoves or other heat sources such as your car dashboard in the summer.
Do not attempt to modify, repair or disassemble the product. Do not use the damaged product. Never use aggressive detergents, alcohol or other chemical solutions for cleaning as they could damage the housing or even impair the functionality of the product.
Do not immerse the product in water or other liquids.
There are no serviceable parts inside the product. Never open and take it apart. Keep the product out of the reach of children. Never allow children or people with disabilities to use electrical products unsupervised. Make sure that children do not remove small parts from the product and play with them.

Use

  1. Insert the 3.5mm jack connector of the headphones into the device socket.
  2. To turn on the LED lights, insert the USB connector into the device socket
  3. Adjust the volume level of the device to the lowest level.
  4. Set the desired volume level via the headphone controller or via the device.
  5. Use the wheel to adjust the volume.

Cleaning

If necessary, clean the headphones with a damp cloth and allow them to dry completely before use.
Do not use solvents, corrosive agents or gaseous cleaners.
Make sure that water or other liquids do not enter the housing.

storage

Store the product in a clean and dry area. Keep away from direct sunlight.

Disposal of the product

(Applicable in countries with separate collection systems for recyclable materials) Old products cannot be disposed of in household waste! If the product is no longer able to be used at a certain time, dispose of it according to the regulations in force in your country. This ensures that  old products are professionally recycled and that it also excludes negative consequences for the environment. For this reason, electrical equipment is marked with the symbol shown here.
Technical specifications Driver Unit: 50mm
Connectors: Jack 3.5mm + USB
Speaker Impedance: 20Ω
Speaker sensitivity: 120 +/- 3dB
Frequency Response: 20Hz – 20KHZ
Size: 215 175 100mm
Weight: 300g
**** Usage temperature: 0 – 40°
This product complies with RoHS 2011/65 / EU-2015/863 / EU. The product is marked with the CE mark and complies with the safety standards established by the
European Union.

Officially Licensed Product BSC SPA
Via XX Settembre 1870 nr. 50
47923 Rimini (RN) – Italy VAT number 02431200415 Made in China
Distributed by Esprinet S.p.A.

Documents / Resources

| sparco Gaming SPHEADPHONEPRO Stereo Headphones [pdf] Instruction Manual
SPHEADPHONEPRO, SPHEADPHONEPRO Stereo Headphones, Stereo Headphones, Headphones
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals