oCOSMO CB301524 2.1-Channel Sound Bar User Manual

oCOSMO CB301524 2.1-Channel Sound Bar

Dear Valued Customer,

Congratulations on your new Sound Bar 2.1 with a built-in subwoofer purchase.

• Thank you for your support. To ensure the safety and many years of trouble-free operation of your Sound Bar 2.1, please read the manual carefully before making any adjustments, and keep them in a safe place for future reference.
• The Sound Bar 2.1 is a versatile speaker unit with both digital and analog audio inputs for audiovisual sources. Connect the Sound Bar to the audio output of your TV, and you can use the Sound Bar to enhance the sound from all sources playing through your TV. We hope you enjoy your new Sound Bar 2.1.
• For technical assistance, please call 855-662-6766 and select option 3 or email our tech support group at [email protected].
• For all other inquiries, please call 855-662-6766 and select option 4 or email our customer service group at [email protected].
• We recommend you register your Sound Bar 2.1 online at http://www.oCOSMO.com.

SAFETY INFORMATION

• WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

CAUTION

• RISK OF ELECTRIC SHOCK
• DO NOT OPEN
• TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
• NO USER-SERVICEABLE PARTS INSIDE.
• REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

The lightning flash with an arrow-head symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within a triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and / or fire. In order to prevent potential danger, please observe the following instructions when installing, operating, and cleaning the product. To ensure your safety and prolong the service life of your Sound Bar, please read the following precautions carefully before using the product.

• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade and the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched, particularly at the plugs, convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

SAFETY INSTRUCTIONS

This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use, and maintenance of the product. Read the following safety instructions before operating the Sound Bar. Keep these instructions in a safe place for future reference.

• To avoid the risk of electric shock or component damage, switch off the power before connecting other components to the SOUNDBAR.
• Unplug the power cord before cleaning the SOUNDBAR. Please use the included custom bezel cleaning cloth for cleaning the bezel of the SOUND BAR only. Do not use a liquid or a spray cleaner for cleaning the product. Do not use abrasive cleaners.
• Always use the accessories recommended by the manufacturer to ensure compatibility.
• When moving the SOUND BAR from an area of low temperature to an area of high temperature, condensation may form on the housing. Do not turn on the SOUND BAR immediately after this to avoid causing fire, electric shock, or component damage.
• Do not place the SOUND BAR on an unstable cart, stand, or table. If the SOUND BAR falls, it can injure a person and cause serious damage to the appliance.
• Any heat source should maintain a distance of at least 5 feet away from the SOUND BAR, i.e. radiator, heater, oven, amplifier, etc. Do not install the product too close to anything that produces smoke or moisture. Operating the product close to smoke or moisture may cause fire or electric shock.
• Never push any object into the ventilation slots of the SOUNDBAR. Do not place any objects on the top of the Product. It could short-circuit parts causing a fire or electric shock. Never spill liquids on the SOUNDBAR.
• The SOUND BAR should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
• The power cable must be replaced when using a different voltage from that specified in the User Manual. For more information, contact your dealer.
• Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
• The wall socket should be installed near the equipment and should be easily accessible.
• Only the marked power source can be used for the product. Any power source other than the specified one may cause fire or electric shock.
• Do not touch the power cord during thunderstorms. To avoid electric shock, avoid handling the power cord during electrical storms.
• Unplug the unit during a lightning storm or when it will not be used for a long period of time. This will protect the SOUND BAR from damage due to power surges.
• Do not attempt to repair or service the product yourself. Opening or removing the back cover may expose you to high voltages, the risk of electric shock, and other hazards. If repair is required, please contact your dealer and refer all servicing to qualified service personnel.
• Keep the product away from moisture. Do not expose this appliance to rain or moisture. If water penetrates into the product, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.
• Do not use the product if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair the product yourself.
• Avoid using dropped or damaged appliances. If the product is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of the product may cause fire or electric

Package Contents

• Sound Bar x 1
• User Manual x 1
• Warranty Card x 1
• Drywall Anchor with Screw x 2 Sets
• 3 Head RCA Audio Cable x 1
• 3.5 mm Mini-jack Cable x 1
• Sound Bar Remote Control with lithium CR2025 Battery x 1

Overviews

Front & Back 

1. WALL MOUNT BRACKETS : Use these brackets to hang the sound bar on a wall.
2. POWER CABLE : Connect this to a surge protector or wall outlet to power the Sound Bar.
3. COAXIAL SPDIF : Connect your digital audio outputs to this connection for audio.
4. AUX : Connect your analog audio output to this connection for audio.
5. LINE IN (3.5mm) : Connect the headphone out from any device to this connection for audio.
6. POWER BUTTON : Press this button to turn the Sound Bar on or off.
7. SOURCE BUTTON : Use this button to select the sound connection between LINE (3.5 mm mini-jack), COAX (digital), and AUX (analog).
8. SOUND MODE BUTTON : Use this button to select from various sound modes:
   • MOVIE : Ideal for watching movies.
   • MUSIC : Designed for listening to music broadcasts.
   • NEWS : Suited for watching news programs.
   • GAMES : Tailored for gaming, including sports games like football, soccer, basketball, and baseball.
9. VOL(-/+) TOUCH SENSORS : Slide your finger across the (-) touch sensor to decrease the volume and the (+) touch sensor to increase the volume.
10. DISPLAY : This screen displays the current status of the sound bar, providing you with essential information about the audio settings and mode.

Sound Bar Remote & Extras

This remote uses a lithium CR2025 battery.

1. POWER – Turns the Sound Bar on or off.
2. VOLUME (–) – Press this button to decrease the volume.
3. MOVIE – Press this button to switch to the MOVIE sound mode.
4. NEWS – Press this button to switch to the NEWS sound mode.
5. AUX – Press this button to switch to the analog audio source AUX.
6. DIM – Press this button to dim the display on the soundbar.
7. LINE – Press this button to switch to the analog source LINE.
8. MUTE – Press this button to mute the volume.
9. VOLUME (+) – Press this button to increase the volume.
10. GAMES – Press this button to switch to the GAMES sound mode.
11. MUSIC – Press this button to switch to the MUSIC sound mode.
12. COAX – Press this button to switch to the digital audio source COAX.
13. BASS – Press this button to enhance bass output.
14. SLEEP – Press this button to enable the sleep function.

PLEASE NOTE:

• The Sound Bar remote power button controls both the turning on and turning off functions of the Sound Bar and any oCOSMO TV.
• The mute button of the Sound Bar only mutes the sound bar, not the oCOSMO TV, however, if you use the oCOSMO TV remote’s mute, it will mute the Sound Bar.

Some oCOSMO HDTV remotes might also have buttons used to control the soundbar. If you see Power, Source, Mode, and Vol (+/-) buttons encircled with the SOUNDBAR word next to it, you can use them to control the Sound Bar.

1. POWER – This button turns on or off the Sound Bar.
2. SOURCE – This button changes the sound source on the Sound Bar between COAX and AUX.
3. MODE – This button changes the sound mode on the Sound Bar.
4. VOL(-) – This button decreases the volume on the Sound Bar.
5. VOL(+) – This button increases the volume on the Sound Bar.

Mounting the Sound Bar

To mount the Sound Bar you need to have 520 mm of horizontal space on the wall.

1. Measure the length of 520mm on the wall.
2. With a pencil mark the two entry points where you are going to install the dry wall anchors and puncture the points with a nail so it is easier for the anchor to be screwed in.
3. With a #2 Phillips screwdriver press the anchor tip slightly into the point marked previously on the drywall. Applying pressure, turn the screwdriver until the anchor is flush with the drywall. Do this for both drywall anchors.
4. Insert the screw into the anchor and use the screwdriver to tighten it into the anchor.
5. The drywall anchor will “CLICK” once, when the screw is halfway in, in order to indicate that the anchor is secure. Please continue tightening until the screw has about 1/8th of an inch left.
6. Align the mounting brackets on the back of the sound bar to the two screws protruding on the wall and fit into them, then finally slowly lower the sound bar so that it securely hangs onto the screws.

Installing Batteries to the Remote Control

Please insert one CR2025 lithium battery into the remote control. Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment. Afterward, re-attach the battery cover.

Please note:

• Only use CR2025 lithium batteries.
• Inserting the batteries incorrectly may also result in cracking or leakage that may pose a fire risk or lead to personal injury.
• Dispose of the batteries in accordance with local laws and regulations.
• Keep the batteries away from children and pets.
• If the remote control is not used for a long time, remove the batteries.
• Keep the remote control away from moisture, sunlight, and high temperatures.

 Connection Suggestions

If you have digital audio with your TV

1. Grab the included 3-head RCA audio cable and use the black colored RCA plug.
2. Find the SPDIF digital audio coax connection on the back of the TV and connect one end of the cable to it.
3. Connect the other end of the cable to the back of the Sound Bar’s black coax connection.
4. Turn on the TV, and make sure you output the PCM signal to the Sound Bar.
5. Turn on the Sound Bar and press the COAX button on the Sound Bar’s remote.
6. Enjoy your Sound Bar!

PLEASE NOTE:

• For digital audio, the soundbar only decodes PCM signals. If the sound is static or the Sound Bar is silent that means the signal is not PCM.

If you have analog audio with your TV

1. Grab the included 3-head RCA audio cable and use the red and white colored RCA plug.
2. Find the analog audio out on the back of the TV and connect one end of the cable to it matching the colors red to red, and white to white.
3. Connect the other end of the cable to the back of the Sound Bar’s AUX red and white connection.
4. Turn on the TV, and the Sound Bar.
5. Press the AUX button on the Sound Bar’s remote.
6. Enjoy the Sound Bar!

If you have an audio device with your TV

1. Grab the included 3.5mm mini-jack cable.
2. Find the headphone jack connection on the audio device and connect one end of the cable to it.
3. Connect the other end of the cable to the back of the Sound Bar’s LINE IN connection.
4. Turn on the audio device.
5. Turn on the Sound Bar and press the LINE button on the Sound Bar’s remote.
6. Enjoy your Sound Bar!

 Operation

Switching On/Off the Unit

1. To turn on the unit, press the POWER button on the front panel or the RED button on the remote control. The display window will show the selected source, volume level, and sound mode.
2. To turn off the unit, press the POWER button on the front panel or the RED button on the remote control again.

Selecting a Source

1. Press the SOURCE button on the control panel repeatedly to switch between sources.
   • From the remote control, press the AUX button to select the analog source.
   • Press the COAX button to select the digital input.
   • Use the LINE button for the analog headphone source. The selected source will be displayed on the window.

Volume Control

1. Increase the volume of the soundbar by pressing the VOL+ button.
2. Decrease the volume of the soundbar by pressing the VOL- button.

Note: The soundbar has a maximum volume unit of 30.

Sound Modes

1. Your Sound Bar includes 4 sound modes optimized for different types of content: MOVIE, GAMES, NEWS, and MUSIC.
2. Change the sound mode by either pressing the MODE button on the Sound Bar or using the remote buttons labeled MOVIE, GAMES, NEWS, and MUSIC. The selected mode will be displayed on the Sound Bar.

Sleep Function

1. The sound bar can automatically turn off after a set period. Press the SLEEP button repeatedly to cycle through time duration options of 5, 10, 15, 30, 45, 60, or 90 minutes.

Bass Function

1. The BASS button increases the bass effect of the soundbar. Press the button repeatedly to cycle through different bass values.

Display Brightness (DIM Function)

1. Press the DIM button repeatedly to adjust the brightness of the display window.

Additionally, your Sound Bar features WOW HD™ technology, licensed from SRS Labs, Inc., which enhances audio playback quality by delivering a dynamic 3D entertainment experience with deep, rich bass and high-frequency clarity for crisp detail.

• is a trademark of SRS Lab, Inc.
• WOW HD technology is incorporated under license from SRS Labs, Inc.
• WOW HD™ significantly improves the playback quality of audio, delivering a dynamic 3D entertainment experience with deep, rich bass and high-frequency clarity for crisp detail.

How do I clean the Sound Bar?

Important Precautions:

1. Always unplug the power cable from the socket before cleaning the Sound Bar.
2. Avoid using volatile solvents like alcohol, rosin, or toluene, as they can damage the housing of the Sound Bar.

Cleaning the Bezel and Remote Control:

1. Use a 100% cotton cloth or a microfiber cloth for cleaning.
2. If the remote control or bezel is dirty to the point where dry wiping isn’t sufficient, follow these steps: a. Lightly dampen the cleaning cloth with clean water. Be cautious not to make it dripping wet, as excessive water can cause malfunction and possible permanent damage to the speakers, which may not be covered under warranty. b. Gently wipe the dirty areas of the remote control or bezel with a dampened cloth. c. After cleaning, use a dry microfiber cloth or 100% cotton cloth to wipe the Sound Bar thoroughly.

Additional Note:

• Ensure that you wring out excess water from the cloth before cleaning the bezel or remote to prevent water from penetrating into the electronics.

Troubleshooting

The following table contains the common problems and the solutions to these problems. Please check this list before you contact the technicians.

·             Check that the Sound Bar is not turned off.

·             Check the Sound Bar volume level.

·             Make sure the correct input is selected.

·             Make sure the proper cables are connected.

·             If you are using digital audio, make sure the source is sending out a PCM signal. Some devices have

default settings on Bitstream.

REMOTE DOES NOT WORK| ·             Make sure the battery is properly installed.

·             Take the battery out, press the buttons once or twice, and install the batteries back in to see if it works.

·             Maybe the battery is out of power, please replace the battery.

NO POWER| ·             Make sure the AC power cord is securely connected to a power outlet.

·             Try another electrical device on the power outlet to ensure there is power through it.

Speaker buzzing or humming| ·             Make sure both ends of the audio cables are connected properly.

·             Test the sound bar with another audio cable.

·             Test the sound bar with another TV.

Call Us If You Need Help!

Products are often returned due to a technical problem rather than a defective product that may result in unnecessary shipping charges billed to you. Our trained support personnel can often resolve the problem over the phone or email. For more information on warranty services or repairs after the warranty period, please contact our support department at the number below.

For technical help, contact our Technical Support Group via email or phone. Please have your p/n number, serial number, and date of purchase available before you call.

If you need assistance or have any inquiries regarding your Sound Bar, you can reach out to oCOSMO’s tech support and customer service using the provided contact information:

• Tech Support Email: [email protected]
• Customer Service Email: [email protected]
• Phone: (855) 6oCOSMO / 855-662-6766
• Fax: 626-322-2670
• Website: www.oCOSMO.com
• Operation Hours: Mon – Fri at 8:30 AM – 5:30 PM (PST)

Feel free to contact them during their operating hours for any technical assistance, inquiries, or support related to your Sound Bar.

Specification

Sound Bar Spec

| ****

Full range Speaker

| Speaker(s) x Diameter (inch)| 2 × 2”
---|---|---|---
Speaker type| Active
Rated Impedance| 8Ω
Frequency Response (Hz)| 160 Hz – 20k Hz
Sound Pressure

Level (dB)

| 80dB ± 3dB
Output Power (Watt)| 18W

Subwoofer

| Subwoofer x Diameter (inch)| 1 × 3”
Bonus| Additional 1 passive radiator
Rated Impedance| 4Ω
Frequency Response (Hz)| 65 Hz – 160 Hz
Output Power (Watt)| 35W

Connection

| Connectivity

Technology

| Wired

Analog Audio Input

| 2 × Stereo RCA Inputs

1 × 3.5mm

Stereo Jack

Digital Audio Input| 1 × Coaxial

Power

| Power Input Range| 100 – 240VAC,

50/60 Hz

Power Off Consumption| ≤ 0.5W
Preset EQ| Modes| Music, Movie, News, Games

Features

| ****

SRS WOW HD TM

| Sound Enhancement Technology expands the horizontal sound field, adding deep, powerful, and rich bass and

enhance clarity and detail

Preset EQ

| 4 Professional fine-tuned preset Equalizer Settings enhance the audio fantastic experience

Sound Bar 2.1

| Compact Design stereo output of 18W x 2 and built-in subwoofer 35W creates crisp and vivid audio sound to the last

note

| Subwoofer 35W with Passive

Radiator

| Enhance the sound to create rich, deep, and powerful bass quality with the help of the passive radiator to create low

frequency performance

---|---|---
Subwoofer Level| Three levels of bass enhancement maximized the bass performance
Sleep| Auto turn-off function that provides peace

of mind energy saving

LED Dimmer| Control the LED light brightness to match the atmosphere
Mute| One button switching the volume on / off

instantly

Design| Sleek and stylish compact design for the ultimate entertainment
Touch Sensory Control| Contemporary buttons with the slightest touch of your finger
Connection ports| Adding flexibility with connecting multiple audio devices
Easy installation| Tabletop or wall-mountable. Lightweight design.

General

| ****

What’s Included

| 1 × CB301524 2.1 Sound Bar

1 × 3 head RCA Audio Cable 1 × 3.5mm Stereo Cable

1 × Remote Control with Battery (CR2025)

1 × Drywall Anchor with Screw (2 sets) 1 × User Manual

1 × Warranty Card

Dimension

| Sound Bar Dimension (inch)| 37.4” x 2.17” x 3.54”
Packaging Dimension (inch)| 38.9” x 5.4” x 4.1”

Weight

| Product Weight (pound)| 4.13 lb
Gross Weight

(pound)

| 5.96 lb
Regulations| Certifications| FCC, ETL
Compliances| RoHS
Warranty| One year Limited Parts and Labor

*The product’s specifications may change without notice or obligation.
**This manual’s pictures and words are for reference only and are subject to change without notice or obligation. oCOSMO is not liable for the misuse or misinterpretation of this manual.

LIMITED PRODUCT WARRANTY

Please read this warranty card carefully, it is a “ONE-YEAR LIMITED WARRANTY” on parts and labor (90 days for commercial use) and is only valid when purchased from an Authorized Reseller, only on the new and non-refurbished product, and available to customers in the Continental US, Alaska, Hawaii and Puerto Rico. See below for the oCOSMO Extended Service warranty.

oCOSMO’s Responsibility

oCOSMO units purchased from an authorized oCOSMO U.S. Reseller in the United States and that are used in the fifty (50) United States or Puerto Rico and Canada are warranted to be free from manufacturing defects in materials and workmanship for a period of one (1) year from the date of their original retail purchase (or a period of ninety (90) days for commercial use). If the unit fails to conform to this warranty, we will service the units using new or refurbished parts. In the event that the part required for replacement is no longer in production and/or is obsolete, oCOSMO will repair or replace the unit with similar or like parts of equal value. If a similar or like part is not available, a charge may be incurred to the owner, for any upgraded parts substituted.

Service Labor During a period of one (1) year from the effective warranty date (or a period of ninety (90) days for commercial use), oCOSMO will provide, when needed, service labor to repair a manufacturing defect at its designated Service Center. To obtain warranty service in the United States, you must first call our Customer Support at 855-662-6766. The determination of service will be made by oCOSMO Customer Support. PLEASE DO NOT RETURN YOUR UNIT TO oCOSMO WITHOUT PRIOR AUTHORIZATION.

Parts New or remanufactured parts will be used for repairs by oCOSMO at its designated Service Center for one (1) year (or ninety (90) days for commercial use) from the effective warranty date. Such replacement parts are warranted for the remaining portion of the original warranty period.

Service During the one (1) year (or ninety (90) days for commercial use) warranty period, oCOSMO will, at its option and sole discretion, repair or replace defective parts, including replacement of the entire Panel. The Customer will be required to ship the unit to the Service Center indicated at the time Customer Support is contacted to make the necessary repairs, you are responsible for all transportation charges to the service facility. oCOSMO is not responsible for the de-installation or re-installation of the unit.

Packaging and Shipping Instruction

When you send the product to an authorized oCOSMO service facility you must use the original carton box and packing material or an equivalent as designated by oCOSMO. If you no longer have them please contact oCOSMO’s Customer Support.

Not Covered

This warranty does not cover the following: cosmetic defects; damage, malfunctions, or failures resulting from shipping or transit accidents, abuse, misuse, operation contrary to furnished instructions, operation on incorrect power supplies, operation with faulty associated equipment, modification, alteration, improper servicing, tampering and or, damage from fire, water, lightning, power surges, abnormal environmental conditions, or other acts of nature; normal wear and tear (oCOSMO reserves the right to determine “wear and tear” on any and all products); unsatisfactory audio performance not caused by a manufacturing defect; or Sound Bars on which the serial number has been removed or defaced. Mishandling is not covered by this warranty. Installation, removal, transportation, and reinstallation of a speaker.

Routine maintenance and cleaning, as well as any hardware, components, and/or software bundled with the Sound Bar, are not covered by this warranty. Any damages caused directly or indirectly by the Buyer’s or Reseller’s “Value Added Feature” are not covered by this warranty or oCOSMO. Any damages of any kind, including but not limited to direct or indirect damages, lost profits, lost savings, or other special incidental, exemplary, or consequential damages, whether for breach of contract, tort, or otherwise, or whether arising out of the use of or inability to use the product, even if oCOSMO or any dealer, distributor, or authorized service provider/partner has been advised of the possibility of such damages or any claim by any other warranty, are not covered by this warranty or oCOSMO.

ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. OUR LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER, INCLUDING OUR NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE SPEAKER. WE SHALL NOT BE RESPONSIBLE FOR LOSS OF USE, COMMERCIAL LOSS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.

This warranty gives you specific legal rights, and you may also have other rights that vary from state to state. This is the only warranty applicable; no one is authorized to extend or modify it or to grant any other warranty. oCOSMO retains the right to assess all warranty claims and to determine if damages are covered by the warranty. In case of a claim that is not covered by the warranty, you will be contacted to determine whether oCOSMO should repair the damage for a fee or whether the product should be returned to you as received by the repair center.

Owner’s Responsibility

Effective Warranty Date

The warranty begins on the date of sale to the end user. To ensure warranty service, keep the dated bill or sale receipt as evidence of the purchase date. If you can no longer obtain your receipt, the warranty will revert to the unit’s manufacture date according to the serial number of the unit. This limited warranty applies only to the original purchaser and is non- transferable.

Warranty Service

For warranty service information, contact oCOSMO Technical Support at the email address [email protected], via phone at 855-662-6766, or via World Wide Web chatting service at www.oCOSMO.com. oCOSMO Technical Support is available Monday to Friday, 8:30 AM to 5:30 PM Pacific Time. Parts and service labor that are oCOSMO’s responsibility (see above) will be provided without charge. Other services or services not covered by the warranty are at the owner’s expense. You must provide the model, serial number, and date of purchase. Before you ask for warranty service, read your User Manual. You might avoid a service call.

Warranty conditions are subject to change; for the latest Warranty Terms and Conditions and additional information regarding your warranty, please see complete details online at www.oCOSMO.com.

Disclaimer, Trademarks, & Copyright Information

• oCOSMO is a trademark or registered trademark of oCOSMO Group.
• oCOSMO shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
• is a trademark of SRS Labs, Inc.
• In the interest of continuing product improvement, oCOSMO reserves the right to change product specifications without notice. Information in this document may change without notice.
• No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission from oCOSMO.

FCC Compliance Statement

• This device complies with Part 15 of the FCC Rules.
• Operation is subject to the following conditions:
• This device may not cause harmful interference
• This device must accept any interference received, including interference that my cause undesired operation.

Please Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

Caution: To comply with the limits for an FCC Class B computing device, always use the signal cord and power cord supplied with this unit.

The Federal Communications Commission warns that changes or modifications to the unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

European Notice

Products with the CE marking comply with both the EMC Directive (89/336/EEC), (93/68/EEC) and the Low Voltage Directive (72/23/EEC) issued by the Commission of the European Community.

www.oCOSMO.com

FAQs

How do I connect the oCOSMO CB301524 Sound Bar to my TV?

You can connect the Sound Bar to your TV by using the audio output of your TV. Use the included cables (3.5mm or digital) to connect to the appropriate input on the Sound Bar.

What sound modes are available on the Sound Bar, and when should I use them?

The Sound Bar offers several sound modes, including Movie, Music, News, and Games. Choose the mode that suits your content. For example, use Movie mode for a cinematic experience, Music mode for music broadcasts, and Games mode for gaming.

How do I control the volume on the Sound Bar?

You can adjust the volume by using the touch-sensitive sensors on the Sound Bar. Slide your finger across the (-) sensor to decrease the volume and the (+) sensor to increase it. You can also use the included remote control.

Can I mount the Sound Bar on a wall?

Yes, the Sound Bar can be wall-mounted using the provided wall mount brackets. Make sure to follow the installation instructions in the user manual for a secure setup.

What should I do if I encounter technical issues with the Sound Bar?

How do I clean the Sound Bar?

To clean the Sound Bar, use a dry cloth. Do not use liquid or spray cleaners, as they can damage the product. Additionally, there is a custom bezel cleaning cloth included for cleaning the bezel.

What safety precautions should I take with the Sound Bar?

It's important to follow safety precautions, such as not exposing the Sound Bar to rain or moisture, keeping it away from heat sources, and not blocking ventilation openings.

Can I use the Sound Bar with devices other than my TV?

Yes, the Sound Bar can be used with various audio sources, including smartphones, tablets, and gaming consoles. Simply connect the device to the Sound Bar using the appropriate audio input.

How do I switch between digital and analog audio inputs on the Sound Bar?

Use the SOURCE button on the Sound Bar or the remote control to toggle between different audio inputs, including LINE (3.5mm mini-jack), COAX (digital), and AUX (analog).

What is the purpose of the DIM button on the remote control?

The DIM button allows you to dim the display on the Sound Bar. This can be useful if you prefer a less bright display in a dark room.

Is there a sleep function on the Sound Bar?

Yes, the Sound Bar has a sleep function. You can activate it by pressing the SLEEP button on the remote control. This feature can be handy if you want the Sound Bar to automatically turn off after a specified period of inactivity.

Can I enhance the bass output of the Sound Bar?

Yes, you can enhance the bass output by pressing the BASS button on the remote control. This allows you to adjust the bass level to your preference.

How do I mute the volume on the Sound Bar?

To mute the volume, simply press the MUTE button on the remote control. Press it again to unmute the sound.

Download This PDF Link:oCOSMO CB301524 2.1-Channel Sound Bar User Manual

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>