legrand WIRG6000C Large Capacity Two-Piece Steel Surface Raceway Instruction Manual

legrand WIRG6000C Large Capacity Two-Piece Steel Surface Raceway Instruction Manual

FEATURES & BENEFITS

• Steel raceway. Provides superior strength for any dry interior location installation.
• Extra large cross sectional area. Provides space for large wiring requirements or installations that use large diameter cable for power and/or data/communications.
• Dividable raceway base. Snap-in divider creates two compartment raceway. For bringing large amounts of power and data/communications cable to one location.
• Complete line of fittings. Provides complete wiring solution and allows for interconnection between raceway systems.
• Gary baked enamel and Ivory Scuff Coat finish. Enamel finish assures durability; can be easily overpainted. Durable Ivory Scuff coat finish makes a scratch resistant surface.
• Installs as a feeder or header raceway. Ideal for overhead, open spaces and underfloor applications.
• Accommodates large size devices. Large size raceway accepts single- and dual-gang devices up to 100 amps and circuit breakers up to three pole.
• Pre-cut covers for standard outlet center locations. For mounting devices on various centres without cutting the covers which reduces number of field cuts for labor savings.
• Base and cover cutters. Manually operated cutters are lightweight and portable. Cutters offer labor savings for any size job and maintain a factory clean and square cut.
• Communication connectivity options. Accepts industry standard and proprietary devices from a wide range of manufacturers to provide a seamless and aesthetically pleasing interface for voice, data, audio, and video applications at the point of use.
• ADA compliant. Raceway and fittings can be installed in conformance with ADA requirements.
• UL Listed and CSA Certified. Raceway UL file E4376 Guide RJBT, CSA file LR350. Fittings UL file 41751 Guide RJPR, CSA file 350 and 48952.

6000 Series Raceway System Layout

NOTE: Illustration is for showing single service product application only.

6000 Raceway Wire Fill Capacity for Power

NOTE: For additional information, refer to the Technical Section of ED1560 (Product Guide).

6000 Raceway Cable Fill Capacities for Data/Communications

NOTE: Capacity range is calculated at 20% to 40% of raceway area as stated in a proposed revision to the Commercial Building Standard for Telecommunication Pathways & Spaces, TIA/EIA-569. Actual wire fill capacity may vary based on applications, cable types, and number, as well as type of fittings. (Fitting may cause additional variances to the fill capacity.)

• Category 6 augmented (6a) cable for 10 gigabit ethernet – max allowed cable diameter per addenda No. 11 ANSI TIA/EIA 568-B.2.

6000 Series Raceway Ordering Information

4047 Series Cover Plates Ordering Information

4047 Series Configurable Cover Plates Number Logic

4000 Series Faceplates Ordering Information

Communication Endplates Ordering Information

V/G4050 & 5507 Series Faceplates Ordering Information

NOTE: All faceplates are 4 1/4″ long x 1 11/16″ wide (108mm x 43mm).

• Add “G” suffix to indicate gray finish.
  Not for use with 4047BF and 4047RF Device Covers.

NOTE: All brand and product names referenced in this document are registered trademarks or trademarks of their respective holders.

Electrical Wiring Systems
60 Woodlawn Street
West Hartford, CT 06110
Phone: 1.877.BY.LEGRAND (295-3472)
www.legrand.us
570 Applewood Crescent
Vaughan, Ontario L4K 4B4
Phone:905.738.9195
www.legrand.ca

ED530R19 – Updated November 2022 – For latest specs visit www.legrand.us/wiremold
© Copyright 2022 Legrand All Rights Reserved

References

• Legrand CA | Delivering and Managing Power, Light, and Data
• Legrand US | Delivering and Managing Power, Light, and Data
• Resources
• Wiremold Wire and Cable Management Products from Legrand

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>