nVent HOFFMAN CPMK16 Floor Stand Kit Owner’s Manual
- June 13, 2024
- nVent HOFFMAN
Table of Contents
nVent HOFFMAN CPMK16 Floor Stand Kit
Product Information
The product includes various mounting accessories and kits designed to assist in the installation and mounting of different enclosures. These accessories are made from durable materials such as steel, stainless steel, composite, and fiberglass. They are designed to meet specific requirements such as maintaining a Type 4 or 12 rating, supporting maximum loads, or complying with UL/CSA external mounting standards.
Mounting Bracket Kits (DMFK)
- Catalog Numbers: DMFK1, DMFK2
- Description: Mounting bracket kit
- Includes two 14-gauge steel mounting brackets with fasteners
- Sealing washers provided for Type 4 or 12 rating
- Plated steel brackets
- Fastener Thread Size: #10-32
Mounting Bracket Kits (CMFK, CMFKSS, CMTGFT)
- Catalog Numbers: CMFK, CMFKSS, CMTGFT
- Description: Steel, Stainless Steel, Composite mounting bracket kits
- Field installable
- Composite and stainless steel brackets rated to Type 4X
- A Set of four brackets supports a maximum load of 500 lb (227 kg)
- All hardware included
- Fastener Thread Size: #3/8-16
ULTRX Mounting Bracket Kit (UUMF)
- Catalog Number: UUMF
- Description: Mounting bracket kit
- Field-installable
- Corrosion-resistant fiberglass material
- Includes Type 316 stainless steel mounting hardware
- Four mounting brackets per kit
Pole-Mount Kit (CPMK12, CPMK16, CPMK20, CPMK24, CPMK30)
- Catalog Numbers: CPMK12, CPMK16, CPMK20, CPMK24, CPMK30
- Fits Enclosure (in.): B = 12.00, 16.00, 20.00, 24.00, 30.00
- Fits Enclosure (mm): B = 305, 406, 508, 610, 762
- Use to mount CONCEPT, Networking, and wall-mount enclosures to poles
- A plated steel channel bar attaches to the enclosure
- Stainless steel strap wraps around the pole
- Kit includes two mounting channels, two straps suitable for
3-in. to 12-in. diameter poles, and mounting hardware
Bottom Support Kit (A17SUPPORT1, A17SUPPORT2)
- Catalog Numbers: A17SUPPORT1, A17SUPPORT2
- Use with A17 One-Door Fiberglass Enclosures or A17 Two-Door Fiberglass Enclosures
- Bolt-in bottom support plate with mounting hardware
- Coated with ANSI 61 gray polyester powder paint
Unistrut Mounting Kit (A17UNISTRUT)
- Catalog Number: A17UNISTRUT
- Use with A17 Two-Door Fiberglass Enclosures
- Bolt-in internal uni strut channel with mounting hardware
- Requires installation of Hoffman A17SUPPORT2 plate to secure uni strut
Enclosure Stabilizers (AENST)
- Catalog Number: AENST
- Description: Two stabilizers
- Helps stabilize floor-mount enclosures
- Slip under the floor stand and tighten two thumb screws
- Made from .19in. (5-mm) steel plate
- Bright orange finish
Floor Stand Kit
The information for the Floor Stand Kit is not provided in the given text extract.
Product Usage Instructions
Mounting Bracket Kits (DMFK, CMFK, CMFKSS, CMTGFT)
- Select the appropriate mounting bracket kit based on the desired material and type.
- Ensure that the enclosure meets the requirements for field installation.
- Use the provided fasteners to attach the steel brackets to the enclosure securely.
- If maintaining a Type 4 or 12 rating is required, use the sealing washers provided.
ULTRX Mounting Bracket Kit (UUMF)
- Identify the desired location for mounting the enclosure.
- Install the corrosion-resistant fiberglass mounting brackets using the included Type 316 stainless steel hardware.
- Ensure that the enclosure is securely mounted using the four brackets provided in the kit.
Pole-Mount Kit (CPMK12, CPMK16, CPMK20, CPMK24, CPMK30)
- Determine the appropriate pole size for mounting the enclosure.
- Attach the plated steel channel bar to the mounting holes at the back of the enclosure.
- Wrap the stainless steel strap around the pole and through the bar.
- Tighten the strap to secure the enclosure to the pole.
Bottom Support Kit (A17SUPPORT1, A17SUPPORT2)
- Select the appropriate support kit based on the type of A17 fiberglass enclosure being used.
- Use the provided mounting hardware to bolt in the bottom support plate.
- Ensure that the plate is securely attached to support the floor stands or casters on the enclosure.
Unistrut Mounting Kit (A17UNISTRUT)
- Verify that an A17 Two-Door Fiberglass Enclosure is being used.
- Bolt-in the internal uni strut channel using the provided mounting hardware.
- Install the Hoffman A17SUPPORT2 plate to secure the uni strut within the enclosure.
Enclosure Stabilizers (AENST)
- Place the stabilizers under the floor-mount enclosures that are not bolted down.
- Tighten the two thumb screws to secure the stabilizers in place.
- Ensure that the stabilizers provide adequate stability to prevent injury to workers.
Mounting BrAcket
Mounting BrAcket kits (DMFk)
Mounting bracket kits are field-installable. Includes two 14-gauge, steel,
external mounting brackets and fasteners. Sealing washers are provided with
each kit to maintain Type 4 or 12 rating after installation. Steel mounting
brackets are plated.
Bulletin: A80
Mounting BrAcket kits (cMFk, cMtgFt)
Mounting-Bracket Kits are field installable. Composite and stainless steel
brackets are rated to Type 4X. Set of four (4) brackets can support 500 lb.
(227 kg) maximum load. All hardwareis included. Four brackets per kit.
Mounting brackets are required to maintain UL/CSA external mounting
requirements.
Bulletin: A80
| Catalog Number | Description | Fastener Thread Size |
|---|---|---|
| CMFK | Steel | #3/8-16 |
| CMFKSS | Stainless Steel | #3/8-16 |
| CMTGFT | Composite | #3/8-16 |
ultra Mounting BrAcket kit
Kit is field-installable. Corrosion-resistant fiberglass material. Type 316
stainless steel mounting hardware is included. Four mounting brackets per kit.
Bulletin: uX1Y
| Catalog Number | Description | Kit Qty. |
|---|---|---|
| UUMF | Mounting Bracket Kit | 4 |
PoLe-Mount kit
Use to mount CONCEPT, Networking and wall-mount enclosures to poles of various
sizes and shapes. Simply attach the plated steel channel bar to the mounting
holes at the back of the enclosure and wrap the stainless steel strap around
the pole and through the bar. Kit includes two mounting channels, two straps
suitable for 3-in.(76-mm) to 12-in. (305-mm) diameter pole and mounting
hardware.
Bulletin: cWY
| Catalog Number | Fits Enclosure (in.) | Fits Enclosure (mm) |
|---|---|---|
| CPMK12 | when B = 12.00 | when B = 305 |
| CPMK16 | when B = 16.00 | when B = 406 |
| CPMK20 | when B = 20.00 | when B = 508 |
| CPMK24 | when B = 24.00 | when B = 610 |
| CPMK30 | when B = 30.00 | when B = 762 |
Bottom support kit
Bolt-in bottom support plate with mountng hardware. Coated with ANSI 61 gray
polyester powder paint. Required when installing Hoffman floor stands or
casters on A17 fiberglass free-standing enclosures.
Bulletin: A17Y
Uni strut Mounting kit
Bolt-in internal uni strut channel (8 pieces) with mounting hardware. Required
to install Hoffman uni strut-mounted free-stand panels and accessories in two-
door A17 fiberglass enclosures. Hoffman A17SUPPORT2 plate must also be
installed to secure unistrut.
Bulletin: A17Y
Enclosure Stabilizers
Helps prevent injury to workers by stabilizing floor-mount enclosures that are
not bolted down. To install, slip the stabilizer under the floor stand and
tighten two thumb screws. Made from .19- in. (5-mm) steel plate. Bright orange
finish.
Bulletin: A80
Floor stand kit
Industry Standads
The product maintains UL/CSA Type 4, 4X (stainless steel only), and Type 12
when properly installed on Hoffman Type 4 or Type 12 enclosures.
APPLicAtion
Kits are easily installed on most wall-mount Hoffman enclosures. Can also be
used to elevate Hoffman free-stand enclosures. To install, drill holes in the
bottom of the enclosure and bolt the floor stands to the enclosure. It is not
necessary to remove the wall-mount brackets from the enclosure.
Specifications
12 gauge steel floor stand has an ANSI 61 gray polyester powder finish over pretreated surfaces. Stainless steel floor stand is available in Type 316 and Type 304.
Components
Each kit includes two stands. Two sets of floor stands are recommended for
enclosures larger than double door free-stand enclosures.
Ordering
Special heights, depths, materials and finishes can be provided on custom
order. Consult factory for information.
Bulletin: A4SY, A80 
Catalog Number| Material| Height, H (in.)| Height, H (mm)|
Width, C (in.)| Width, C (mm)| L (in.)| L (mm)
---|---|---|---|---|---|---|---
AFK0608| Steel| 6.00| 152| 8.06| 205| 7.06| 179
AFK0610| Steel| 6.00| 152| 10.06| 256| 7.06| 179
AFK0612| Steel| 6.00| 152| 12.06| 306| 7.06| 179
AFK0618| Steel| 6.00| 152| 18.06| 459| 7.06| 179
AFK1208| Steel| 12.00| 305| 8.06| 205| 8.12| 206
AFK1210| Steel| 12.00| 305| 10.06| 256| 8.12| 206
AFK1212| Steel| 12.00| 305| 12.06| 306| 8.12| 206
AFK1216| Steel| 12.00| 305| 16.06| 408| 8.12| 206
AFK1218| Steel| 12.00| 305| 18.13| 461| 8.12| 206
AFK1220| Steel| 12.00| 305| 20.06| 510| 8.12| 206
AFK1808| Steel| 18.00| 457| 8.06| 205| 9.17| 233
AFK1810| Steel| 18.00| 457| 10.06| 256| 9.17| 233
AFK1812| Steel| 18.00| 457| 12.06| 306| 9.17| 233
AFK1816| Steel| 18.00| 457| 16.06| 408| 9.17| 233
AFK2408| Steel| 24.00| 610| 8.06| 205| 10.23| 260
AFK2410| Steel| 24.00| 610| 10.06| 256| 10.23| 260
AFK2412| Steel| 24.00| 610| 12.06| 306| 10.23| 260
AFK2416| Steel| 24.00| 610| 16.06| 408| 10.23| 260
AFK0608SS| Stainless Steel, 304| 6.00| 152| 8.06| 205| 9.09| 231
AFK0610SS| Stainless Steel, 304| 6.00| 152| 10.06| 256| 9.09| 231
AFK0612SS| Stainless Steel, 304| 6.00| 152| 12.06| 306| 9.09| 231
AFK0618SS| Stainless Steel, 304| 6.00| 152| 18.06| 459| 9.09| 231
AFK0624SS| Stainless Steel, 304| 6.00| 152| 24.06| 611| 9.09| 231
AFK1208SS| Stainless Steel, 304| 12.00| 305| 8.06| 205| 9.09| 231
AFK1210SS| Stainless Steel, 304| 12.00| 305| 10.06| 256| 9.09| 231
AFK1212SS| Stainless Steel, 304| 12.00| 305| 12.06| 306| 9.09| 231
AFK1216SS| Stainless Steel, 304| 12.00| 305| 16.06| 408| 9.09| 231
AFK1218SS| Stainless Steel, 304| 12.00| 305| 18.06| 459| 9.09| 231
AFK1224SS| Stainless Steel, 304| 12.00| 305| 24.06| 611| 9.09| 231
AFK1808SS| Stainless Steel, 304| 18.00| 457| 8.06| 205| 9.09| 231
AFK1810SS| Stainless Steel, 304| 18.00| 457| 10.06| 256| 9.09| 231
AFK1812SS| Stainless Steel, 304| 18.00| 457| 12.06| 306| 9.09| 231
AFK1816SS| Stainless Steel, 304| 18.00| 457| 16.06| 408| 9.09| 231
AFK1818SS| Stainless Steel, 304| 18.00| 457| 18.06| 459| 9.09| 231
AFK1824SS| Stainless Steel, 304| 18.00| 457| 24.06| 611| 9.09| 231
AFK2408SS| Stainless Steel, 304| 24.00| 610| 8.06| 205| 9.09| 231
AFK2410SS| Stainless Steel, 304| 24.00| 610| 10.06| 256| 9.09| 231
AFK2412SS| Stainless Steel, 304| 24.00| 610| 12.06| 306| 9.09| 231
Catalog Number| Material| Height, H (in.)| Height, H (mm)|
Width, C (in.)| Width, C (mm)| L (in.)| L (mm)
---|---|---|---|---|---|---|---
AFK2416SS| Stainless Steel, 304| 24.00| 610| 16.06| 408| 9.09| 231
AFK2418SS| Stainless Steel, 304| 24.00| 610| 18.06| 459| 9.09| 231
AFK2424SS| Stainless Steel, 334| 24.00| 610| 24.06| 611| 9.09| 231
AFK0608SS6| Stainless Steel, 316| 6.00| 152| 8.06| 205| 9.09| 231
AFK0610SS6| Stainless Steel, 316| 6.00| 152| 10.06| 256| 9.09| 231
AFK0612SS6| Stainless Steel, 316| 6.00| 152| 12.06| 306| 9.09| 231
AFK0618SS6| Stainless Steel, 316| 6.00| 152| 18.06| 459| 9.09| 231
AFK0624SS6| Stainless Steel, 316| 6.00| 152| 24.06| 611| 9.09| 231
AFK1208SS6| Stainless Steel, 316| 12.00| 305| 8.06| 205| 9.09| 231
AFK1210SS6| Stainless Steel, 316| 12.00| 305| 10.06| 256| 9.09| 231
AFK1212SS6| Stainless Steel, 316| 12.00| 305| 12.06| 306| 9.09| 231
AFK1216SS6| Stainless Steel, 316| 12.00| 305| 16.06| 408| 9.09| 231
AFK1218SS6| Stainless Steel, 316| 12.00| 305| 18.06| 459| 9.09| 231
AFK1224SS6| Stainless Steel, 316| 12.00| 305| 24.06| 611| 9.09| 231
AFK1808SS6| Stainless Steel, 316| 18.00| 457| 8.06| 205| 9.09| 231
AFK1810SS6| Stainless Steel, 316| 18.00| 457| 10.06| 256| 9.09| 231
AFK1812SS6| Stainless Steel, 316| 18.00| 457| 12.06| 306| 9.09| 231
AFK1816SS6| Stainless Steel, 316| 18.00| 457| 16.06| 408| 9.09| 231
AFK1818SS6| Stainless Steel, 316| 18.00| 457| 18.06| 459| 9.09| 231
AFK1824SS6| Stainless Steel, 316| 18.00| 457| 24.06| 611| 9.09| 231
AFK2408SS6| Stainless Steel, 316| 24.00| 610| 8.06| 205| 9.09| 231
AFK2410SS6| Stainless Steel, 316| 24.00| 610| 10.06| 256| 9.09| 231
AFK2412SS6| Stainless Steel, 316| 24.00| 610| 12.06| 306| 9.09| 231
AFK2416SS6| Stainless Steel, 316| 24.00| 610| 16.06| 408| 9.09| 231
AFK2418SS6| Stainless Steel, 316| 24.00| 610| 18.06| 459| 9.09| 231
AFK2424SS6| Stainless Steel, 316| 24.00| 610| 24.06| 611| 9.09| 231
- nVent.com/HOFFMAN.
- PH 763.422.2211
- Spec-00484 K
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>