DREMEL PAWCONTROL 7760-PGK Cordless Pet Nail Grooming Kit User Guide

PAWCONTROL™
QUICK START
GUIDE SUPPORTS:
7760-PGK

PAWCONTROL 7760-PGK Cordless Pet Nail Grooming Kit

CORDLESS PET NAIL GROOMING KIT

For customer service support and to learn more about what you can do with your new Dremel rotary tool go to Dremel.com
DREMEL PAWCONTROL™ PETNAILGROOMING KIT
WELCOME TO DREMEL!
Thank you for purchasing the Dremel PawControl! We hope that you find it to be one of the handiest and most versatile tools you’ll own. This guide has what you need to start grooming your pet’s nails in a few easy steps.

GETTING TO KNOW THE TOOL

The kit includes Pet Grooming accessories & attachments for both the novice and the experienced groomer. We recommend using the combination that feels most comfortable for you and your pet. For freehand grooming for the experienced groomer, we recommend using the 407 sanding band & mandrel (Figure 1).
For the novice groomer, we recommend using the Nail Grooming Attachment with SD60-PGA Sanding Disc & EZ 402 mandrel (Figure 2).

BEYOND PET GROOMING!

Dremel is known for its versatility, and your Pet Grooming Kit is no different! Dremel Rotary Tools can tackle a variety of tasks. outside of grooming your pet’s nails. These handy tools allow you to sand, grind, polish, or engrave, depending on the type of accessory being used.
Learn more about the types of applications you can do with a Dremel in the chart or visit Dremel.com to learn more about our tools, accessories, and find project inspiration.

Tip Cut-off wheels & cutting discs ensure optimal results in different materials.
Carving/Engraving| Making surface cuts in material to produce a shaped groove or tapered holes.
Carving /Sharpening| Removing excess material from a piece or creating a sharp edge on a tool designed for cutting.
Cleaning /Polishing| To make a surface smooth or shiny by rubbing.
Sanding| Smoothing or polishing material surface.
Routing| Hallowing out surface area of a material to create grooves, rebates, inlays, & profile edges.
Collets| Collets offer the most precise way to hold an accessory in your Dremel Lite.

“Cuting& Routing appications re ot ecommended withDremel PavContol

GETTING STARTED

1. CHARGE IT!
   Fully charge the tool before use (approximately 2 hours & 45 minutes). A green light wil illuminate from the indicator while charging, which will turn off once fully charged. A red light wil turn on when battery is low. For optimal run-time, charge tool using a 5V/1a minimum power adapter. TIP: A LED light il urs on e th tol tals. s appens, remore th ool from the mateil,shu he tool of, & esume usevithout excess presure. Ifstaling persists, consider sing a ifrentaccssory technique,or oo for the job .

2. SELECT THE RIGHT ACCESSORY
   Your kit includes two combinations of nail grooming accessories to use with your pet.

Pet Grooming Attachment Ideal for novice groomers.
407
1/2″ 60 Grit Sanding Band & Mandrel| NA| NA| 1| Compatible with 1/2″ diameter 408 Sanding Bands
For more experienced groomers, use without AT01-PGA Pet Grooming Attachment for a free-hand option.
408
1/2″ 60 Grit Sanding Band| NA| NA| 1| Replacement for 407 1/2″ 60 Grit Sanding Band For more experienced groomers.
EZ402
EZ Lock Mandrel| NA| NA| 1| Compatible with SD60-PGA Pet Grooming Sanding Discs.
AT01-PGA
Pet Grooming Attachment|  |  | 1|  To be used with the EZ402 Mandrel and SD60-PGA Sanding Discs Nail dust & guard attachment with 45 degree paw guide.

“Recommended maimum peatin spe o pe groring aplcatonsis 10,000/min. s e cauton for igher pees and i te amoutoftimetha the als expesed to esandigsurface. s ofher opeatin spee may cause heatbldp andnry o thepe. Acys oo e for signsofisconfortand top  rooming fbseve.Referto “Operatig Speds’ sectonof nstructiona manual for proper ool sped setin.

3. a CHANGING THE SANDING DISC WITH THE PET GROOMING ATTACHMENT
   A. Detach the clear Gp from the attachment by running the small knobs on the inside of the clear cap up along the height adjustment guide.
   B. Unlock the clasp and open the attachment.
   C. Pull down the spring-loaded sleeve (1) and remove sanding disc (2,3).
   D. Pull down the spring-loaded sleeve (1), place sanding disc on the mandrel (2) and align bow tie interface on bottom of sanding disc (3). Sanding disc should lock in place.
   E. Close the attachment around the threaded nose & ensure it is securely tightened.
   F. Put clear cap back on the attachment by running the small knobs along the height adjustment guide until itis at Position 2. You will hear the cap click into place when fully installed. 3b INSTALLING THE SANDING BAND AND OTHER ACCESSORIES
   Loosen the collet nut by pressing down on the shaft lock button & rotate collet nut by hand untilthe collet opens up to allow an accessory to be placed in it. Once the accessory is placed in the collet, hold the shaft lock button down & use the included collet wrench or EZ Twist Nose Cap (with integrated wrench) to tighten the collet nut & secure the accessory in the collet (Figure 3).
   TIP:Dremel s 4 ifernt sz collets, your it ncudesa 18″ shnk size collet. Visit Dremel.com to find other accessories that can be used with the Lite. When changing accessories, insert the new one into the collet as far as possible to minimize runout & unbalance.
   Avoid excessive tightening of the collet nut when there is nobit inserted (Figure 4). Always check that the accessory is securely installed before operating the tool.
   TIP: e colleisstuck to the collet nut & doe notopen up, preventing the accessor rom beng insertd, use theshank ofthe accessry o genlyoosenthe coltfom the cllet .

4. FAMILIARIZE YOUR PET WITH THE TOOL
   1f you and your pet are new to Dremel pet nail grooming, start by easing into the process. Train your pet to feel comfortable with the tool running and work your way upto nail trimming. This process may take a couple of days or weeks. Every pet is unique. Rest assured that both you and your pet will be able to relax and even enjoy the grooming time that you share together. Tip: Before trimming your pet’s nails, identify here the nil quick starts. Avid cutin nto the quick (Fgure 5).

5. START GROOMING
   If your dog has long fur, band it back to avoid it getting caught during trimming. If your dog has long fur on its paws or between the foot pads, trim the hairs first to lessen the risk of catching on the sanding accessory. Alternatively, you can use an old sock to cover your pet’s toe, foot, and leg and isolate the nail, Support the toe and nail in one hand. Pushing gently on the bottom of the paw’s pad extends the nail slightly for easier grooming. Set the tool speed to 1. Briefly trim the tips of each nail on one paw, and then the other, in several passes as needed. Spend no longer than three seconds on each nail, allowing time for the nails to cool. Don’t apply excess pressure; let the speed of the tool to do the work. TIP : Rule of heprager no o i e snais 5 dgees upwards from the botom of the pa (Figure ).

6. GIVE YOUR PET A TREAT
   Create a positive association with the nail grooming experience by praising & rewarding your pet with their favorite treat!

BEST PRACTICES & ADDITIONAL TIPS

• For more control during the grooming process, use the “Golf Grip” method to hold the tool.
• To prevent overheating the tool, whenever possible, do not grip the tool where it would block the ventilation openings.
• A red LED light will turn on when the tool stalls. If this happens, shut the tool off — & resume use without excess pressure.
• Avoid engaging the shaft lock button while tool is in operation. Doing so wil result in severe internal damage of the tool.
• Turn off tool before making any adjustments or changing accessories.
• Wear personal protective equipment. Depending on application, use dust mask, safety glasses, or work gloves.
• To maximize the run time, apply minimal pressure on the tool & use recommended speed setting for the application.
• Visit hitps://www.dremel.com/en_US/support/product-registration or submit the registration card included in your kit for the most up-to-date product and warranty information.

NEW TO DREMEL?
Sign up for the Dremel Newsletter through our website for exclusive content, project inspiration, tips and more!

Dremel.com
1-800-437-3635 Our Dremel Experts are happy to help.
U.S.A.: 1-800-437-3635
Check outWWW.DREMEL.COM
for project ideas, tips, & much more.
REVIEW US! Share your review of this product on your retailer’s website.

Documents / Resources

| DREMEL PAWCONTROL 7760-PGK Cordless Pet Nail Grooming Kit [pdf] User Guide
7760-PGK, PAWCONTROL 7760-PGK, PAWCONTROL 7760-PGK Cordless Pet Nail Grooming Kit, Cordless Pet Nail Grooming Kit, Pet Nail Grooming Kit, Nail Grooming Kit, Grooming Kit
---|---

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>