ROCCAT SYN Bluetooth In-Ear Gaming Earbuds User Guide
- June 13, 2024
- ROCCAT
Table of Contents
ROCCAT SYN Bluetooth In-Ear Gaming Earbuds
CUSTOMIZE
Download the companion mobile app to customize the Syn Buds to your liking. Adjust and create EQs, remap the touch-enabled functions, and update your firmware as needed without having to wire in.
PACKAGE CONTAINS
EARBUDS CONTROLS
CHARGING CASE CONTROLS
- Your Syn Buds Air gives you 20 total hours of rechargeable battery life. Make sure to charge it regularly before storing it.
CONNECT
To connect to your smartphone, Windows® PC, or other Bluetooth® devices with the latest software, follow the below steps:
- Turn on Bluetooth® on your device.
- Open the case with the earbuds inside to initiate pairing.
- Select Syn Buds Air from your device’s Bluetooth® list.
LED INDICATIONS
FUNCTIONS
Both the left and right earbuds have operatable touch-enabled surfaces that respond to the following actions:
SETUP ON THE NINTENDO SWITCH
- Make sure your Syn Buds Air is not paired to another device.
- Place your Syn Buds Air in the case with the lid open to put them into pairing mode and keep them close to your Nintendo Switch™.
- In your Nintendo Switch’s home menu. Go to System Settings > Bluetooth® Audio > Pair Device
- Select the Syn Buds Air from the menu to pair.
- Once the pairing is successful, select “OK” on the prompt.
- Adjust your Syn Buds Air volume from the Nintendo Switch’s volume controls on the top of the console.
If your Syn Buds Air is not shown on the list of detected devices, hit “Y” to search again. If no devices were detected, select “OK” on the prompt, then “Pair Device” again to search again.
REGULATORY COMPLIANCE STATEMENTS FOR THE SYN BUDS RX & TX
LOCAL RESTRICTIONS ON RADIO USAGE
Caution: Due to the fact that the frequencies used by wireless devices
may not yet be harmonized in all countries, these radio products are designed
for use only in specific countries, and are not allowed to be operated in
countries other than those of designated use. As a user of these products, you
are responsible for ensuring that the products are used only in the countries
for which they were intended and for verifying that they are configured with
the correct selection of frequency and channel for the country of use.
Any deviation from the permissible power and frequency settings for the country of use is an infringement of national law and may be punished as such. To determine whether you are allowed to use your wireless network device in a specific country, please check to see if the radio type number that is printed on the identification label of your device is listed in the manufacturer‘s OEM Regulatory Guidance document at the following URL http://www.turtlebeach.com/ homologation or contact Turtle Beach directly.
FEDERAL COMMUNICATIONS COMMISSION (FCC) COMPLIANCE NOTICES
This section includes the following FCC statements for the Syn Buds:
- FCC IDs: XGB-14102L & XGB-14102R
- RF Radiation Exposure & Hazard Warning
- Non-Modification Statement
CLASS B INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
FCC CAUTION
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
RF RADIATION EXPOSURE & HAZARD STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating
instructions to satisfy RF exposure compliance. This transmitter must not be
co-located or operating in conjunction with any other antenna or transmitter.
NON-MODIFICATION STATEMENT
Use only the supplied internal antenna. Unauthorized antennas, modifications,
or attachments could damage the Syn Buds Pro RX & TX Models and violate FCC
regulations. Any changes or modifications not expressly approved by the party
responsible for compliance could void the user‘s authority to operate this
equipment. Please contact Turtle Beach for a list of approved 2.4 GHz
antennas.
CANADIAN ICES STATEMENTS
IC: 3879A-14102L & 3879A-14102R
This device complies with Industry Canada’s license-exempt RSSs. Operation is
subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
RF RADIATION EXPOSURE & HAZARD STATEMENT
The product complies with Canada’s portable RF exposure limits set forth for
an uncontrolled environment and is safe for intended operation as described in
this manual. Further RF exposure reduction can be achieved if the product can
be kept as far as possible from the user body or set the device to lower
output power if such a function is available.
EUROPEAN UNION AND EUROPEAN FAIR TRADE ASSOCIATION (EFTA) REGULATORY
COMPLIANCE
This equipment may be operated in the countries that comprise the member
countries of the European Union and the European Fair Trade Association. These
countries, listed below, are referred to as The European Community throughout
this document: AUSTRIA, BELGIUM, BULGARIA, CYPRUS, CZECH REPUBLIC, DENMARK,
ESTONIA, FINLAND, FRANCE, GERMANY, GREECE, HUNGARY, IRELAND, ITALY, LATVIA,
LITHUANIA, LUXEMBOURG, MALTA, NETHERLANDS, POLAND, PORTUGAL, ROMANIA,
SLOVAKIA, SLOVENIA, SPAIN, SWEDEN, UNITED KINGDOM, ICELAND, LICHTENSTEIN,
NORWAY, SWITZERLAND
Declaration of Conformity
Marking by this symbol: indicates compliance with the Essential Requirements
of the EMC Directive of the European Union (2014/30/EU). This equipment meets
the following conformance standards:
- Safety: EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013(T-Mark License),
- IEC 60950-1:2005 (2nd Ed.) + Am 1:2009 + Am 2:2013 (CB Scheme Certificate),
- IEC 62368-1:2014,
- EN 50332-2:2013
- EMC: EN 301489-1 V2.1.1(2017-02), EN301489-17 V3.1.1(2016-11)
- Radio: EN 300328 V2.2.2
- SAR: EN 62311:2008
Environmental
RoHS 2015/863 amending Annex II to 2011/65/EU, WEEE 2012/19/EUREACH
2006/1907/EC, Packaging 94/62/EC, Battery 2006/66/EC
- Package 94/92/EU
- Radiofrequency: 2400MHz
- Operating frequency: 2400~2483.5MHz
- Max. Output power: 10dBm
- Please visit the following URL for a complete copy of the Declaration of Conformity: http://www.turtlebeach.com/homologation
Warning!
This is a Class B product. In a domestic environment, this product may cause
radio interference, in which case, the user may be required to take
appropriate measures. This symbol on the product or its packaging indicates
that this product must not be disposed of with your other household waste.
Instead, it is your responsibility to dispose of your waste equipment by
handing it over to a designated collection point for the recycling of waste
electrical and electronic equipment. The separate collection and recycling of
your waste equipment at the time of disposal will help conserve natural
resources and ensure that it is recycled in a manner that protects human
health and the environment. For more information about where you can drop off
your waste for recycling, please contact your local authority, or where you
purchased your product.
Turtle Beach Europe Ltd is obligated as a producer with a main activity of
selling under The Producer Responsibility Obligations (Packaging Waste)
Regulations 2007. To fulfill our obligation we are registered with Comply
Direct and their Recycling Room. Here you will find advice and information on
packaging waste management, recycling symbols, and the waste hierarchy
principles of reduce, reuse, and recycle.
https://www.complydirect.com/the-recycling-room/
VOYETRA TURTLE BEACH, INC. | 44 SOUTH BROADWAY, 4TH FLOOR, WHITE PLAINS NY
10601, USA
2021 Voyetra Turtle Beach, Inc. All rights reserved. Any product names
mentioned in this manual may be trademarks or registered trademarks and are
the property of their respective owners. Information contained herein is
subject to change without notice. Voyetra Turtle Beach, Inc. shall not be made
liable for any errors that may appear in this manual. This publication or
parts of it may not be reproduced without the express consent of the
publisher.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>