CORSA PERFORMANCE CC0006 Oil Catch Can Kit Installation Guide
- June 13, 2024
- CORSA PERFORMANCE
Table of Contents
CORSA PERFORMANCE CC0006 Oil Catch Can Kit
Product Information
The product is a catch can designed for the 2015+ Hellcat 6.2L engine. It is manufactured by CORSA Performance and its part number is CC0006.
Product Usage Instructions
- Before starting the installation process, review the enclosed instructions.
- If you have any questions or encounter any issues during installation, contact technical support at 440.891.0999 or 800.486.0999.
- To activate your warranty, visit corsaperformance.com/warranty.
- Color instructions are available on corsaperformance.com by part number.
- Ensure that the engine bay is cool before working on it.
- The installation difficulty is recommended to be performed by a qualified service center or professional installer. However, if you decide to install it yourself, consider having an additional person to assist.
- Do not work on a hot engine bay. Allow time for the vehicle to cool.
- The warranty does not cover damage or defects in the finish of the product, misuse, accidents, negligence, alterations or modifications, faulty installation, installation contrary to CORSA instructions, or repairs by unauthorized service facilities.
- Confirm that all parts are present according to the bill of materials before starting the installation. If anything is missing, contact Tech Support at 440.891.0999 or toll-free at 1.800.486.0999.
Hardware Kit
- 1 x 3/8 NPT Barbed Elbow Fitting
- 2 x Catch Can Body
- 1 x Bracket
- 2 x 5/8 Quick Disconnect Elbow Fittings
- 3 x 4mm Hex Screws
- 1 x M10 Flange Nut
- 2 x 5/8 Hose A (not pictured)
- 2 x 5/8 Hose B (not pictured)
Removal Instructions
- Remove the passenger side engine cover by releasing it from the press fit tabs.
- Locate the PCV line on the passenger side of the engine and remove it by pressing the tabs on the quick disconnect fittings.
Installation Instructions
CORSA CATCH CAN SYSTEM
- Install the 3/8 NPT fittings to the catch can. Apply thread sealant or PTFE tape on barbed fittings and bottom drain plug to prevent leaks.
- Attach the catch can to the bracket using the 2.5mm Allen Wrench and 3 screws.
- Sandwich the bracket between the engine bolt using the 2 flange nuts and a 15mm wrench. Ensure that the serrated flange side of the nut is pressed against both sides of the bracket.
IMPORTANT! WARRANTY AND INSTALLATION INSTRUCTIONS
Please Forward All Information to Consumer
Be sure to review the enclosed instructions prior to beginning the
installation process. If you have any questions about the enclosed parts or
instructions, or if you encounter a problem during installation:
CALL TECHNICAL SUPPORT: 440.891.0999 or 800.486.0999
TO ACTIVATE YOUR WARRANTY GO TO: CORSAPERFORMANCE.COM/WARRANTY
COLOR INSTRUCTIONS ARE AVAILABLE BY PART NUMBER ON: CORSAPERFORMANCE.COM
NEVER work on a hot engine bay. Allow time for the vehicle to cool.
INSTALL DIFFICULTY
RECOMMENDED TOOLS & SUPPLIES
- 15mm Wrench
- 2.5mm Hex Wrench
- 11/16” Wrench
Please take time to read and understand these installation instructions.
- CORSA recommends that the installation of this system be performed by a qualified service center or professional installer who has the necessary equipment, tools, and experienced personnel. However, if you decide to perform this installation yourself, the use of an additional person may be required.
- WARNING: Never work on a hot engine bay. Allow time for the vehicle to cool.
- This warranty does not extend to damaged or defect in the finish of a product or to any product, that in the opinion of CORSA Performance, has been misused, damaged by accident or negligence, altered or modified in any way, faulty installation or installed contrary to CORSA installation instructions, or repaired by an unauthorized service facility.
- Full warranty available on www.corsaperformance.com
- Please confirm that all parts are present according to the bill of materials before beginning the installation.
- If something is missing call Tech Support at 440.891.099 or Toll Free: 1.800.486.0999
HARDWARE KIT
1. 3/8” NPT Barbed Elbow
Fitting
| 2| 3. Bracket| 1| 6. M10 Flange Nut
---|---|---|---|---
2. Catch Can Body| 1| 4. 5/8” Quick Disconnect Elbow
Fittings
| 2| NOT PICTURED:
| | 5. 4mm Hex Screws| 3| 7. 5/8” Hose A
| | | | 8. 5/8” Hose B
| | | |
REMOVAL INSTRUCTIONS
- Remove passenger side engine cover by releasing it from the press fit tabs. Locate the PCV line on the passenger side of the engine and remove by pressing the tabs on the quick disconnect fittings.
This concludes removal instructions.
INSTALLATION INSTRUCTIONS
-
Install the 3/8” NPT fittings to the catch can.
IMPORTANT: Corsa recommends using thread sealant or PTFE tape on barbed fittings and bottom drain plug to prevent any leaks. -
Using the 2.5mm Allen Wrench and 3 screws,attach the catch can to the bracket. Use the 2 flange nuts and an 15mm wrench to sandwich the bracket in between on the engine bolt. NOTE: Make sure serrated flange side of nut is pressed against both sides of the bracket.
- Attach quick disconnect elbow fitting to the ends of each hose. Install Hose A on the “A” side of the catch can and route the hose to the engine fitting to the left of the supercharger.
- Install Hose B to the “B” side of the catch can and route the hose to the silver engine fitting located behind the bracket. Make sure both quick disconnect fittings click into place over the engine fittings (colors of fittings may vary).
- Make sure all fittings are secured in place and hose is pushed all the way over the barbed ends of the fittings. Reinstall engine cover.
This concludes installation instructions.
Check that this catch can complies with your Federal, State and Local laws. We recommend saving your stock PCV line.
BEFORE ROAD TESTING
- Start engine, leaving the transmission in park and securing the parking brake.
- Make sure to look and listen for any unusual noises or air leaks. Repair problems if needed.
- Once completed it will be necessary to check periodically, after a few heat cycles, for realignment and tightening of all connections.
EMPTYING CATCH CAN: Twist off the bottom of the catch can and dump captured oil back into engine or dispose of it. It is recommended to check and empty the catch can with every oil change.
140 Blaze Industrial Parkway, Berea, OH 44017 l P: 440.891.0999 F:
440.891.1868
[email protected] l
www.corsaperformance.com
References
- Warranty Center
- Performance Exhaust Systems | Buy Cold Air Intake Kits, High-Performance Mufflers & Headers at CORSA PERFORMANCE
- Performance Exhaust Systems | Buy Cold Air Intake Kits, High-Performance Mufflers & Headers at CORSA PERFORMANCE