JEGS 52-44410 AccuTech Stepper Motor Tachometer Filter Instructions
- June 13, 2024
- JEGS
Table of Contents
- Black / Ground wire connects to the engine or to the negative pole of the battery.
- Brown / Red Wire connect to RPM signal input on the meter side.
- Brown / RPM Wire connect to one of the options bellow.
- Ignition Coil positive
- Ignition coil positive
- Coil
- Spark plug wire
- Spark plug cap
- Spark plug
- Pick up sensor
- Tachometer
NOTE
When connecting the RPM wire, follow the instruction above. If you connect the
red & brown wires in parallel this may damage the instrument.
CAUTION!
If the meter needle is unstable at idle RPM, connect the signal filler
according to the above diagram in order to solve the problem. Using a screw
driver, gently turn the adjustment clock wise or counter clock wise until the
meter needle slop to bounce.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>