JEGS 555-48450 Secret Audio AM-FM Stereo Radio with Bluetooth Installation Guide
- May 15, 2024
- JEGS
Table of Contents
JEGS 555-48450 Secret Audio AM-FM Stereo Radio with Bluetooth
Specifications
- Product: JEGS 555-48450 Wiring Diagram
- Connector: 12 Pin MOLEX Connector
Product Usage Instructions
Installation
Section A
Refer to the following table for PIN and wire color information:
| PIN NO. | WIRE COLOR |
|---|---|
| 1 | GREEN |
| 2 | GREEN/BLACK |
| 4 | WHITE |
| 5 | WHITE/BLACK |
| 6 | GREY |
| 8 | GREY/BLACK |
| 9 | BLUE |
Section B – Speaker Definitions
- This section provides information on the rear left(+) speaker.
- Refer to the specific wiring details for speaker connections.
Wiring Diagram
INSTALLATION
Before you begin, always disconnect the battery negative terminal.
Important Notes
- Before final installation, test the wiring connections to make sure the unit is con- nected properly and the system works.
- Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.
- Consult with your nearest dealer if instal- lation requires the drilling of holes or other modifications to your vehicle.
- Install the unit where it does not interfere with driving and cannot injure passengers if there is a sudden or emergency stop.
- Avoid installing the unit where it will be subject to high temperatures from direct sunlight, hot air, or from a heater, or where it would be subject to excessive dust, dirt, or vibration.
- This system requires a minimum of 2speakers (one speaker for each right and left channel) If you only have a location for one speaker our DVC (dual voice coil)speaker can be used. Do not connect any of the speakers leads to each other or vehicle ground.
- The system requires 12-volt negative ground.
- Blue power antenna lead is for a 12volt possitve trigger of optional amplifiers or power antenna relay. Do not connect to any accessory that requires a high current. If your vehicle is not equipped with an automatic antenna or amplifiers tape this lead off.
FAQ
Frequently Asked Questions
- Q: How do I connect the JEGS 555-48450 Wiring Diagram to my vehicle?
- A: Follow the installation instructions provided in Section A for proper wiring connections. Ensure to match the wire colors with the correct pin numbers.
- Q: Can I use this wiring diagram for other audio systems?
- A: The JEGS 555-48450 Wiring Diagram is designed for specific applications. It is recommended to consult with a professional if attempting to use it with different audio systems.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>