SIGNATURE HARDWARE Berwyn Freestanding Tub Faucet with Hand Shower Instruction Manual
- June 13, 2024
- Signature Hardware
Table of Contents
SIGNATURE HARDWARE Berwyn Freestanding Tub Faucet with Hand Shower Instruction Manual
BEFORE YOU BEGIN
We recommend consulting a professional if you are unfamiliar with installing plumbing xtures. Signature Hardware accepts no liability for any damage to the faucet, plumbing, sink, counter top, or for personal injury during installation. Observe all local plumbing and building codes. Unpack and inspect the product for shipping damage. If any damage is found, contact our Customer Relations team via live chat at www.signaturehardware.com or by emailing support@signaturehardware.com.
GETTING STARTED
Ensure that you have gathered all the required materials that are needed for the installation.
TOOLS AND MATERIALS:
INSTALLATION
-
Position the mounting bracket on the wall where desired. Using a pencil, lightly mark the location of mounting screws on the wall.
NOTE: Mounting bracket should be oriented properly and level. -
At the marked location, drill a pilot hole with the appropriate drill bit for the wall surface or material.
NOTE: If installing into drywall, be sure to use drywall anchors.
-
Using a screwdriver, attach the mounting bracket to the wall with the mounting screws. Make sure the flat side of the mounting bracket is flat against the wall.
-
Place the bathroom accessory over the mounting bracket and tighten set screw with hex wrench.