legrand 880S1 OmniBox Series Floor Box User Guide
- June 13, 2024
- Legrand
Table of Contents
legrand 880S1 OmniBox Series Floor Box
Product Information
The OmniBox Series Floor Boxes are fully adjustable, multiple service floor boxes designed to provide protection from water, dirt, and debris. They are available in stamped steel and cast iron options.
Features & Benefits
- Aesthetically pleasing flush activation cover
- Protection from water, dirt, and debris
- Fully adjustable
- Multiple service
Vertical Markets
The OmniBox Series Floor Boxes can be used in various vertical markets.
Compliance
The metallic outlet boxes comply with the following standards:
- File E2961
- Guide QCIT
- Boxes & Covers UL514A, 514C, 514D
- Canadian standard C22.2
Technical Specifications
The technical specifications of the different models are as follows:
Model| Conduit Openings| Cubic Inch Adjustment Capacity Before Pour|
Adjustment After Pour| Country of Origin
---|---|---|---|---
OmniBox Series Stamped Steel Floor Box 880S1| (3) 1/2 (12.7mm), (5) 3/4
(19.1mm)| 53| 1/2 (12.7mm)| Mexico
OmniBox Series Stamped Steel Floor Box 880S2| (4) 1/2 (12.7mm), (8) 3/4
(19.1mm)| 117| 1/2 (12.7mm)| Mexico
OmniBox Series Stamped Steel Floor Box 880S3| (5) 1/2 (12.7mm), (11) 3/4
(19.1mm)| 180| 1/2 (12.7mm)| Mexico
OmniBox Series Shallow Stamped Steel Floor Box 880M1| (5) 1/2 (12.7mm), (5)
3/4 (19.1mm)| 37| 1/2 (12.7mm)| Mexico
OmniBox Series Shallow Stamped Steel Floor Box 880M2| (8) 1/2 (12.7mm), (8)
3/4 (19.1mm)| 80| 1/2 (12.7mm)| Mexico
OmniBox Series Shallow Stamped Steel Floor Box 880M3| (11) 1/2 (12.7mm), (11)
3/4 (19.1mm)| 126| 1/2 (12.7mm)| Mexico
OmniBox Series Cast Iron Floor Box 880CS1-1| (4) 1 (25mm)| 48| 1/2 (12.7mm)|
China
OmniBox Series Cast Iron Floor Box 880CS2-1| (6) 1 (25mm)| 94| 1/2 (12.7mm)|
China
OmniBox Series Cast Iron Floor Box 880CS3-1| (8) 1 (25mm)| 160| 1/2 (12.7mm)|
China
Note: For the latest specifications, visit www.legrand.us/wiremold.
Product Usage Instructions
To install the OmniBox Series Floor Boxes, follow these steps:
- Choose the appropriate model based on your requirements and the technical specifications provided.
- Prepare the installation location on the floor by cutting a hole according to the dimensions specified for the selected model.
- Ensure that the conduit openings align with your desired electrical or data connections.
- Place the floor box into the prepared hole, making sure it is level and flush with the floor surface.
- Adjust the cubic inch capacity before pouring the concrete as per the specified values for the selected model.
- Pour the concrete around the floor box, taking care not to damage any conduit openings or other components.
- After the concrete has cured, adjust the conduit openings as necessary.
- The OmniBox Series Floor Box is now ready to be used for your electrical or data connections.
Fully Adjustable, Multiple Service, Floor Boxes
OmniBox™ Series Floor Boxes provides an excellent activation solution when
multiple services are required in open space areas. OmniBox™ Series Floor
Boxes offer one-, two-, and three-gang multi-service boxes that are fully
adjustable before and after the concrete pour. Available in both stamped steel
and cast iron fabrications, they meet a wide range of workstation requirements
for today’s and tomorrow’s service needs. These floor boxes have many
applications, some of which include schools, financial institutions, and
commercial office buildings. .
Two-gang OmniBox Series Floor Box Installation with an aesthetically pleasing flush activation cover.
Features & Benefits
- Fully adjustable box. Fully adjustable both before and after concrete pour. Reduces installation costs.
- Two Fabrications: Stamped Steel – Lower cost concrete- tight construction option for above grade applications. Cast-Iron – Watertight construction for on or below grade applications.
- Available in two depths. Economical alternatives when pour depths are limited.
- Flush activation assemblies for carpet and tile. Aesthetically pleasing assemblies are interchangeable in both cast-iron and stamped steel box models.
- Available in one-, two-, and three-gang configurations. Removable dividers increase capacity. More configurations to support multi-service applications.
- Triple service boxes. Accommodates power, communication and/or audio/video devices which reduces the need for multiple boxes.
- Brushed aluminum covers for power applications. 830CK Series Aluminum Covers redesigned to accept threaded conduit when passing through power cables.
- Brass and brushed aluminum covers accept single locking power receptacles. New 828DLR Series provides single flip lid cover.
- 828COMTC Series Cover Kit in brass and brushed aluminum. Allows communication devices to be recessed into 880S and 880CS Series Floor Boxes.
- Partition support kit for 3-gang tile flanges. The 838TAL-880 Series Flanges provide partition supports in tile applications for added strength and durability.
- TopGuard protection. All cover assemblies for the OmniBox Floor Box Series have TopGuard protection. An integral design which keeps out water, dirt, and debris from the power and communication compartments.
- Boxes and covers have been listed by Underwriters Laboratories Inc. to their standard UL514A, 514C, 514D, and Canadian standard C22.2
- Datacom connectivity options. Accepts industry standard and proprietary devices from a wide range of manufacturers to provide a seamless and aesthetically pleasing interface for voice, data, audio, and video applications at the point-of-use. A wide selection of data and adapter options available for use with Ortronics® TracJack® and Series II devices.
Vertical Markets
- Commercial
- Education
- Government
- Healthcare
- Retail
Download this product’s PEP ecopasport® environmental product declaration at www.legrand.us/resources-and-downloads. This declaration conforms with ISO 14025 and 14040 and is in alignment with EN 15804.
Compliance
Metallic Outlet Boxes File E2961, Guide QCIT,
Boxes & Covers UL514A, 514C, 514D & Canadian standard C22.2.
OmniBox Series Stamped Steel Floor Boxes Ordering Information
One-Gang Stamped Steel Floor Box – Fully Adjustable.
TECHNICAL SPECIFICATIONS| | |
---|---|---|---
Conduit Openings
| Cubic Inch Capacity| Adjustment Before Pour| Adjustment
After Pour
(3) 1/2″ (12.7mm), (5) 3/4″ (19.1mm)
(2) 1″ (25mm)
| 53| 1 3/4″ (44mm)| 1/2″ (12.7mm)
Country of Origin: Mexico
Two-Gang Stamped Steel Floor Box – Fully Adjustable.
TECHNICAL SPECIFICATIONS| | |
---|---|---|---
Conduit Openings
| Cubic Inch Capacity| Adjustment Before Pour| Adjustment
After Pour
(4) 1/2″ (12.7mm), (8) 3/4″ (19.1mm)
(4) 1″ (25mm)
| 117 (58/59)| 1 3/4″ (44mm)| 1/2″ (12.7mm)
Country of Origin: Mexico
Three-Gang Stamped Steel Floor Box – Fully Adjustable.
TECHNICAL SPECIFICATIONS| | |
---|---|---|---
Conduit Openings
| Cubic Inch Capacity| Adjustment Before Pour| Adjustment
After Pour
(5) 1/2″ (12.7mm), (11) 3/4″ (19.1mm)
(6) 1″ (25mm)
| 180 (56/68/56)| 1 3/4″ (44mm)| 1/2″ (12.7mm)
Country of Origin: Mexico
OmniBox Series Shallow Stamped Steel Floor Boxes Ordering Information
One-Gang Shallow Stamped Steel Floor Box – Fully Adjustable.
TECHNICAL SPECIFICATIONS| | |
---|---|---|---
Conduit Openings
| Cubic Inch Capacity| Adjustment Before Pour| Adjustment
After Pour
(5) 1/2″ (12.7mm),
(5) 3/4″ (19.1mm)
| 37| 1 3/4″ (44mm)| 1/2″ (12.7mm)
Country of Origin: Mexico
Two-Gang Shallow Stamped Steel Floor Box – Fully Adjustable.
TECHNICAL SPECIFICATIONS| | |
---|---|---|---
Conduit Openings
| Cubic Inch Capacity| Adjustment Before Pour| Adjustment
After Pour
(8) 1/2″ (12.7mm),
(8) 3/4″ (19.1mm)
| 80
40/40
| 1 3/4″ (44mm)| 1/2″ (12.7mm)
Country of Origin: Mexico
Three-Gang Shallow Stamped Steel Floor Box – Fully Adjustable.
TECHNICAL SPECIFICATIONS| | |
---|---|---|---
Conduit Openings
| Cubic Inch Capacity| Adjustment Before Pour| Adjustment
After Pour
(11) 1/2″ (12.7mm),
(11) 3/4″ (19.1mm)
| 126
39/48/39
| 1 3/4″ (44mm)| 1/2″ (12.7mm)
Country of Origin: Mexico
OmniBox Series Cast Iron Floor Boxes Ordering Information
One-Gang Cast Iron Floor Box – Fully Adjustable.
TECHNICAL SPECIFICATIONS| | |
---|---|---|---
Conduit Openings
| Cubic Inch Capacity| Adjustment Before Pour| Adjustment
After Pour
(4) 1″ (25mm)| 48| 1 3/4″ (44mm)| 1/2″ (12.7mm)
Country of Origin: China
Two-Gang Cast Iron Floor Box – Fully Adjustable.
TECHNICAL SPECIFICATIONS| | |
---|---|---|---
Conduit Openings
| Cubic Inch Capacity| Adjustment Before Pour| Adjustment
After Pour
(6) 1″ (25mm)| 94 (45/49)| 1 3/4″ (44mm)| 1/2″ (12.7mm)
Country of Origin: China
Three-Gang Cast Iron Floor Box – Fully Adjustable.
TECHNICAL SPECIFICATIONS| | |
---|---|---|---
Conduit Openings
| Cubic Inch Capacity| Adjustment Before Pour| Adjustment
After Pour
(8) 1″ (25mm)| 160 (53/54/53)| 1 3/4″ (44mm)| 1/2″ (12.7mm)
Country of Origin: China
OmniBox Series North America Made Cast Iron Floor Boxes Ordering
Information
North America Made One-Gang Cast Iron Floor Box – Fully Adjustable
TECHNICAL SPECIFICATIONS| | |
---|---|---|---
Conduit Openings
| Cubic Inch Capacity| Adjustment Before Pour| Adjustment
After Pour
(4) 1″ (25mm)| 48| 1 3/4″ (44mm)| 1/2″ (12.7mm)
Country of Origin: USA
North America Made Two-Gang Cast Iron Floor Box – Fully Adjustable
TECHNICAL SPECIFICATIONS| | |
---|---|---|---
Conduit Openings
| Cubic Inch Capacity| Adjustment Before Pour| Adjustment
After Pour
(6) 1″ (25mm)| 94 (45/49)| 1 3/4″ (44mm)| 1/2″ (12.7mm)
Country of Origin: USA
North America Made Three-Gang Cast Iron Floor Box – Fully Adjustable
TECHNICAL SPECIFICATIONS| | |
---|---|---|---
Conduit Openings
| Cubic Inch Capacity| Adjustment Before Pour| Adjustment
After Pour
(8) 1″ (25mm)| 160 (53/54/53)| 1 3/4″ (44mm)| 1/2″ (12.7mm)
Country of Origin: USA
OmniBox Series Shallow Cast Iron Floor Boxes Ordering Information
One-Gang Shallow Cast Iron Floor Box – Fully Adjustable.
TECHNICAL SPECIFICATIONS| | |
---|---|---|---
Conduit Openings
| Cubic Inch Capacity| Adjustment Before Pour| Adjustment
After Pour
(4) 1″ (25mm),| 34| 1 3/4″ (44mm)| 1/2″ (12.7mm)
Country of Origin: USA
Two-Gang Shallow Cast Iron Floor Box – Fully Adjustable.
TECHNICAL SPECIFICATIONS| | |
---|---|---|---
Conduit Openings
| Cubic Inch Capacity| Adjustment Before Pour| Adjustment
After Pour
(6) 1″ (25mm),| 76
36/40
| 1 3/4″ (44mm)| 1/2″ (12.7mm)
Country of Origin: USA
Three-Gang Shallow Cast Iron Floor Box – Fully Adjustable.
TECHNICAL SPECIFICATIONS| | |
---|---|---|---
Conduit Openings
| Cubic Inch Capacity| Adjustment Before Pour| Adjustment
After Pour
(8) 1″ (25mm),| 118
39/40/39
| 1 3/4″ (44mm)| 1/2″ (12.7mm)
Country of Origin: USA
Single-gang stamped steel and triple-gang cast iron models of OmniBox Series Floor Boxes.
OmniBox Series Floor Boxes Solid Brass Cover Plate Flanges Ordering
Information
One-Gang Brass Combination Carpet & Tile Flange – Accepts Ortronics® MAB6TJ
TracJack and MAB3S2 Series II adapters and Wiremold CM Series inserts, sold
separately.
Country of Origin: China
Two-Gang Brass Combination Carpet and Tile Flange – Accepts Ortronics® MAB6TJ
TracJack and MAB3S2 Series II adapters and Wiremold CM Series inserts, sold
separately.
Country of Origin: China
Three-Gang Brass Combination Carpet and Tile Flange – Accepts Ortronics®
MAB6TJ TracJack and MAB3S2 Series II adapters and Wiremold CM Series inserts,
sold separately.
Country of Origin: China
One-Gang Brass Carpet Flange – For use on 880S1, 880M1, 880CS1-1, and 880CM1-1
Floor Boxes.
Country of Origin: China
Two-Gang Brass Carpet Flange – For use on 880S2, 880M2, 880CS2-1, and 880CM2-1
Floor Boxes.
Country of Origin: China
Three-Gang Brass Carpet Flange – For use on 880S3, 880M3, 880CS32-1, and
880CM3-1 Floor Boxes.
Country of Origin: China
One-Gang Brass Tile Flange – For use on 880S1, 880M1, 880CS1-1, and 880M1-1
Floor Boxes.
Country of Origin: China
Two-Gang Brass Tile Flange – For use on 880S2, 880M2, 880CS2-1, and 880CM2-1
Floor Boxes.
Country of Origin: China
Three-Gang Brass Tile Flange – For use on 880S3, 880M3, 880CS3-1, and 880CM3-1
Floor Boxes.
Country of Origin: China
NOTE: UL Listed for tile, terrazzo, and carpet floors.
Brass covers and flanges are not interchangeable with aluminum or nonmetallic
covers and flanges. Nonmetallic covers are interchangeable with aluminum
flanges.
Cover Plates for OmniBox Series Floor Boxes provide access to a wide range of connectivity and are available in both metal and nonmetallic fabrications.
OmniBox Series Floor Boxes Metal Cover Plates Ordering Information
Brass Duplex Cover Plate – Flip lids. Can also be used with a 106 type
communication adapter.
Country of Origin : China
Brass GFI Cover Plate – May be used with Activate and Ortronics® Connectivity
Systems in conjunction with 817B, 827B, and 837B Flanges.
Country of Origin: China
Brass Rectangular Cover Plate – Allows for mounting of a duplex style
receptacle with a rectangular style flip lid cover.
Country of Origin: China
Brass Communication Cover Plate – Allows for up to four communication devices
to be mounted in a recessed position within the 880 Floor Box. The 828COM
Cover Plate has removable slides for cable egress.
Country of Origin : China
NOTE: For use with 880S and 880CS Series Boxes only.
Brass Single Locking Receptacle Cover Plate – Single flip lid cover for 20A or
30A single locking receptacles. Device opening is 2 5/8″ (67mm). For use with
maximum female locking device of 1.58″ diameter, and maximum male plug face of
2.25″ diameter.
Country of Origin: China
Brass Duplex Cover Plate – Screw plugs. Screw plugs are 1 1/2″ (38mm) in
diameter.
Country of Origin: China
Brass Communication Cover Plate – Data slides. Feed through only, not for use
with a mounting plate for communication jacks.
Country of Origin: China
Brass Communication Cover Plate – 2 5/8″ and 2 1/4″ (67mm and 57mm) plugs.
Country of Origin: China
Brass Communication Cover Plate – 2 5/8″ and 1″ (67mm and 25mm) plugs.
Country of Origin : China
Brass Communication Cover Plate – 2 5/8″ and 3/4″ (67mm and 19.1mm) plugs.
Country of Origin: China
Brass Communication Cover Plate – 2 5/8″ and 1/2″ (67mm and 12.7mm) plugs.
Country of Origin : China
A/V Adapter Plate – Sheet metal adapter plate that accepts two (2) Legrand
AVIP devices or two (2) Extron® Electronics MAAP style device plates (sold
separately). For use with 828GFITC or 828GFITCAL cover plates. (Sold
separately)
Country of Origin: USA
NOTE: UL Listed for tile, terrazzo, and carpet floors.
Brass covers and flanges are not interchangeable with aluminum or nonmetallic
covers and flanges. Nonmetallic covers are interchangeable with aluminum
flanges.
OmniBox Series Floor Boxes Brushed Aluminum Cover Plates Ordering
Information
One-Gang Brushed Aluminum Combination Carpet and Tile Flange – Accepts
Ortronics® MAB6TJ TracJack and MAB3S2 Series II adapters and Wiremold CM
Series inserts, sold separately.
Country of Origin: China
NOTE: Brushed aluminum flanges come with beveled edges.
Two-Gang Brushed Aluminum Combination Carpet and Tile Flange – Accepts
Ortronics® MAB6TJ TracJack and MAB3S2 Series II adapters and Wiremold CM
Series inserts, sold separately.
Country of Origin: China
NOTE: Brushed aluminum flanges come with beveled edges.
Three-Gang Brushed Aluminum Combination Carpet and Tile Flange – Accepts
Ortronics® MAB6TJ TracJack and MAB3S2 Series II adapters and Wiremold CM
Series inserts, sold separately.
Country of Origin: China
NOTE: Brushed aluminum flanges come with beveled edges.
One-Gang Brushed Aluminum Tile Flange – For use on 880S1, 880M1, 880CS1-1, and
880M1-1 Floor Boxes.
Country of Origin: China
NOTE: Brushed aluminum flanges come with beveled edges.
Two-Gang Brushed Aluminum Tile Flange – For use on 880S2, 880M2, 880CS2-1, and
880CM2-1 Floor Boxes.
Country of Origin: China
NOTE: Brushed aluminum flanges come with beveled edges.
Kit – The 838TAL-880 Series flanges provide additional load support for 3-gang
tile flanges. Kit includes 838TAL Flange and two support dividers.
Country of Origin: USA
NOTE: Order kit for specific box type: 880S3, 880M3, 880CS3, or 880CM3.
NOTE: UL Listed for tile, terrazzo, and carpet floors. Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges.
OmniBox Series Floor Boxes Metal Cover Plates Ordering Information
Brushed Aluminum Duplex Cover Plate – Flip lids. Can also be used with a
106 type communication adapter.
Country of Origin: China
Brushed Aluminum GFI Cover Plate – May be used with Activate and Ortronics®
Connectivity Systems in conjunction with 817B, 827B, and 837B Flanges.
Country of Origin: China
Brushed Aluminum Rectangular Cover Plate – Allows for mounting of a duplex
style receptacle with a rectangular style flip lid cover.
Country of Origin: China
Brushed Aluminum Communication Cover
Plate – Allows for up to four communication devices to be mounted in a
recessed position within the 880 Floor Box. The 828COMTCAL Cover Plate has
removable slides for cable egress.
Country of Origin: China
NOTE: For use with 880S and 880CS Series Boxes only.
Brushed Aluminum Single Locking Receptacle Cover Plate – Single flip lid cover
for 20A or 30A single locking receptacles. Device opening is 2 5/8″ (67mm).
For use with maximum female locking device of 1.58″ diameter, and maximum male
plug face of 2.25″ diameter.
Country of Origin: China
Brushed Aluminum Cover Plate – Power or communication plate with 2″ (51mm) and
1 1/4″ (32mm) plugs.
Country of Origin: China
NOTE: Acceptable for use with threaded conduit when passing through power
cables.
Brushed Aluminum Cover Plate – Power or communication plate with 2″ (51mm) and
1″ (25mm) plugs.
Country of Origin: China
NOTE: Acceptable for use with threaded conduit when passing through power
cables.
Brushed Aluminum Cover Plate – Power or communication plate with 2″ (51mm) and
3/4″ (19.1mm) plugs.
Country of Origin: China
NOTE: Acceptable for use with threaded conduit when passing through power
cables.
Brushed Aluminum Cover Plate – Power or communication plate with 2″ (51mm) and
1/2″ (12.7mm) plugs.
Country of Origin: China
NOTE: Acceptable for use with threaded conduit when passing through power
cables.
A/V Adapter Plate – Sheet metal adapter plate that accepts two (2) Extron®
Electronics MAAP style device plates (sold separately). For use with 828GFITC
or 828GFITCAL cover plates. (Sold separately)
Country of Origin: China
NOTE: UL Listed for tile, terrazzo, and carpet floors. Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges.
OmniBox Series Floor Boxes Powder-Coated Aluminum Cover Plate Flanges
Ordering Information
One-Gang Powder-Coated Aluminum Combination Carpet and Tile Flange –
Accepts Ortronics® MAB6TJ TracJack and MAB3S2 Series II adapters and Wiremold
CM Series inserts, sold separately. Flanges are available in five decorative
colors: black, gray brass,nickel and bronze.
Country of Origin: China
Two-Gang Powder-Coated Aluminum Combination Carpet and Tile Flange – Accepts
Ortronics® MAB6TJ TracJack and MAB3S2 Series II adapters and Wiremold CM
Series inserts, sold separately. Flanges are available in five decorative
colors: black, gray brass,nickel and bronze.
Country of Origin: China
Three-Gang Powder-Coated Aluminum Combination Carpet and Tile Flange – Accepts
Ortronics® MAB6TJ TracJack and MAB3S2 Series II adapters and Wiremold CM
Series inserts, sold separately. Flanges are available in five decorative
colors: black, gray brass,nickel and bronze.
Country of Origin: China
One-Gang Powder-Coated Aluminum Tile Flange – For use on 880S1, 880M1,
880CS1-1, and 880M1-1 Floor Boxes. Flanges are available in five decorative
colors: black, gray brass,nickel and bronze.
Country of Origin: China
Two-Gang Powder-Coated Aluminum Tile Flange – For use on 880S2, 880M2,
880CS2-1, and 880CM2-1 Floor Boxes. Flanges are available in five decorative
colors: black, gray brass,nickel and bronze.
Country of Origin: China
Powder-Coated Aluminum Duplex Cover Plate – Flip lids. Can also be used with a
106 type communication adapter.
Country of Origin: China
Powder-Coated Aluminum Rectangular Cover Plate – Allows for mounting a duplex
receptacle (Decorator or GFCI style) with a rectangular flip cover
Country of Origin: China
Powder-Coated Aluminum Cover Plate – Power or communication plate with 2″
(51mm) and 1″ (25mm) plugs. Covers are available in five decorative colors:
black, gray brass,nickel and bronze.
Country of Origin : China
NOTE: Acceptable for use with threaded conduit when passing through power
cables.
OmniBox Series Floor Boxes Powder-Coated Aluminum Cover Plate Flanges
Ordering Information
Powder-Coated Aluminum Cover Plate – Power or communication plate with 2″
(51mm) and 3/4″ (19.1mm) plugs. Covers are available in five decorative
colors: black, gray brass,nickel and bronze.
Country of Origin: China
NOTE: Acceptable for use with threaded conduit when passing through power
cables.
A/V Adapter Plate – Sheet metal adapter plate that accepts two (2) Extron®
Electronics MAAP style device plates (sold separately). For use with 828GFITC
or 828GFITCAL cover plates. (Sold separately)
Country of Origin: China
NOTE: UL Listed for tile, terrazzo, and carpet floors.
Brass covers and flanges are not interchangeable with aluminum or nonmetallic
covers and flanges. Nonmetallic covers are interchangeable with aluminum
flanges.
OmniBox Series Floor Boxes Nonmetallic Cover Plate Flanges Ordering
Information
One-Gang Nonmetallic Carpet Flange – Available in black or brown. For
Ortronics® connectivity use with 829PFLRT Cover. For Activate connectivity use
with 829PFL Cover. Accepts Ortronics® MAB6TJ TracJack and MAB3S2 Series II
adapters and Wiremold CM Series inserts, sold separately.
Country of Origin: Mexico
Two-Gang Nonmetallic Carpet Flange – Available in black or brown. For
Ortronics® connectivity use with 829PFLRT Cover. For Activate connectivity use
with 829PFL Cover. Accepts Ortronics® MAB6TJ TracJack and MAB3S2 Series II
adapters and Wiremold CM Series inserts, sold separately.
Country of Origin: Mexico
Three-Gang Nonmetallic Carpet Flange – Available in black or brown. For
Ortronics® connectivity use with 829PFLRT Cover. For Activate connectivity use
with 829PFL Cover. Accepts Ortronics® MAB6TJ TracJack and MAB3S2 Series II
adapters and Wiremold CM Series inserts, sold separately.
Country of Origin: Mexico
NOTE: UL Listed for tile, terrazzo, and carpet floors. Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges.
OmniBox Series Floor Boxes Nonmetallic Cover Plates Ordering Information
Nonmetallic Duplex Cover Plate – Flip lids. Available in black or brown.
Can also be used with a 106 type communication adapter.
Country of Origin: USA
Nonmetallic GFI Cover Plate – Available in black or brown.
May be used with Ortronics® Connectivity systems in conjunction with 817, 827
and 837PCC Series flanges.
Country of Origin: USA
Nonmetallic Communication Cover Plate – Individual flip lids.* Available in
black or brown. Gasket included. Wiremold CM Series inserts included.
Country of Origin: USA
Nonmetallic Communication Cover Plate – Individual flip lids.* Available in
black or brown. Gasket included. Ortronics® MAB6TJ TracJack and MAB3S2 Series
II adapters included.
Country of Origin: USA
Nonmetallic Communication Cover Plate – Breakouts. Available in black or
brown. Feed through only, not for use with a mounting plate for communication
jacks.
Country of Origin: USA
Nonmetallic Communication Cover Plate – Data slides. Available in black or
brown. Feed through only, not for use with a mounting plate for communication
jacks.
Country of Origin: USA
- Replacement flip lids can be ordered under Cat. No. PFL-BLK and PFL-BRN. Each Cat. No. comes with three flip lids. The above cover plates are listed for tile, terrazzo, and carpet floors.
NOTE: Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges.
NOTE: All brand and product names referenced in this document are
registered trademarks or trademarks of their respective holders.
NOTE: The paper used to print this document is an environmentally
responsible paper with 10% post consumer waste, with FSC and SFI Chain of
Custody certifications, Lacey Act complaint. 100% of the electricity used to
manufacture Flo sheets is generated with Green-e certified renewable energy.
Legrand, North America
60 Woodlawn Street
West Hartford, CT 06110 1.877.BY.LEGRAND (295.3472)
www.legrand.us
Canada
905.738.9195
www.legrand.ca
ED772R17 — Updated April 2019 — For latest specs visit
www.legrand.us/wiremold
References
- Legrand CA | Delivering and Managing Power, Light, and Data
- Legrand US | Delivering and Managing Power, Light, and Data
- Resources
- Wiremold Wire and Cable Management Products from Legrand
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>