DIODES DD6566 LED Pod Ditch Light Kit Instruction Manual

: June 13, 2024
: DIODES

Table of Contents

DIODES DD6566 LED Pod Ditch Light Kit
Product Information
Product Usage Instructions
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DIODES DD6566 LED Pod Ditch Light Kit

DIODES-DD6566-LED-Pod-Ditch-Light-Kit-FIG-1

Product Information

The Ford F-150/Raptor LED Pod Ditch Light Kit is a CAD-designed kit that is compatible with the 2015-2020 Ford F-150 and 2017-2020 Ford Raptor. It is designed to use existing mounting points and comes with a 3-year warranty. The kit includes the ditch light bracket and the necessary hardware for installation.

Product Usage Instructions

Mark the location of the hood hinges with tape and tape the edges of the hood to prevent scratching.
Loosen the two 13mm flange nuts as necessary to fit the bracket (removing the nuts completely is not required).
Place the ditch light bracket under the hinge and align the holes with the hood hinge. Adjust the bracket to leave a slight gap at the back of the hood before tightening.
Secure the bracket and hood hinge using the factory nuts, ensuring the hood hinge lines up with the tape.
Remove the tape and repeat the steps on the other side to complete the installation.
Once the bracket is mounted to the hood, refer to the Universal Bracket Info/Mounting Guide to mount your pod onto the bracket.
Use the small cutouts on the bracket and included zip-ties to secure your wiring harness away from the hood hinge.
On Raptor models, the SS3 pod may contact the factory-installed antenna when the hood is opened. This is normal and will not cause damage to either component.
NOTE: Do not use automatic car washes with this kit installed.
If you have any questions about the installation or wiring process, please contact Diode Dynamics at 314-205-3033 (10a-5p CST) or contact@diodedynamics.com. You can also scan the QR code provided in the user manual to access the installation video online.

Thank you for your purchase of our new LED Pod Ditch Light Kit. CAD-designed to use existing mounting points, this kit is compatible with the 2015-2020 Ford F-150 and 2017-2020 Ford Raptor. Basic installation instructions are included below.

Please contact us if you have any questions.

Mark the location of the hood hinges with tape and tape the edges of the hood to prevent scratching.
Loosen the two 13mm flange nuts as necessary to fit the bracket (removing the nuts completely is not required).
Place the ditch light bracket under the hinge and align the holes with the hood hinge. Adjust the bracket to leave a slight gap at the back of the hood before tightening.
Secure the bracket and hood hinge using the factory nuts, ensuring the hood hinge lines up with the tape.
Remove the tape and repeat the steps on the other side to complete the installation.
Once the bracket is mounted to the hood, refer to the Universal Bracket Info/Mounting Guide, to mount your pod onto the bracket. Use the small cutouts on the bracket and included zip-ties to secure your wiring harness away from the hood hinge.
On Raptor models, the SS3 pod may contact the factory-installed antenna when the hood is opened. This is normal, and will not cause damage to either component.

NOTE: Do not use automatic car washes with this kit installed.

Please contact Diode Dynamics should you have any questions about the installation or wiring process, at 314-205-3033 (10a-5p CST) or contact@diodedynamics.com.

NEED MORE HELP?
We’ve taken the time to test our products on your vehicle. We can guarantee compatibility and fitment the first time – no guessing game! If you need more help with installation, watch our step-by-step video to walk you through the process.

This installation guide is for the following SKUs: