FRIGIDAIRE PRSC2222AF Side-By-Side Refrigerator User Guide

FRIGIDAIRE PRSC2222AF Side-By-Side Refrigerator

Product Information

The side-by-side refrigerator comes with several additional items, including a PureAir Ultra IITM Air Filter and a Use & Care Manual. The refrigerator is designed to be placed on a level and sturdy floor. For detailed installation information, refer to the Use & Care Manual. Before using the refrigerator for the first time, clean the inside of the appliance. To ensure safe food storage, allow the refrigerator to operate with the door closed for at least 8 hours before loading it with food. The refrigerator has adjustable controls for temperature settings and features an external Appliance Control Display and a Side Door Appliance Control Display. The Appliance Control Display allows you to control various functions, including water selection, ice type selection, dispenser light control, and temperature adjustment for the freezer and refrigerator compartments. The Side Door Appliance Control Display enables you to control the ice maker, activate freeze boost mode, toggle temperature units between Fahrenheit and Celsius, adjust freezer and refrigerator temperatures, reset alarms, and monitor the status of the water filter and air filter.

Product Usage Instructions

Setting Up the Refrigerator:

1. Ensure that the refrigerator is placed on a level and sturdy floor.
2. Refer to the Use & Care Manual for detailed installation instructions.

Before Operating for the First Time:

1. Clean the inside of the refrigerator using the guidelines provided in the CARE AND CLEANING section of the Use & Care Manual.
2. Allow the refrigerator to operate with the door closed for at least 8 hours before loading it with food.

Adjusting Controls:
Using your refrigerator starts with adjusting the controls. Follow these steps:

1. Refer to the Use & Care Manual for detailed instructions on adjusting the controls.
2. Make small increments in temperature adjustment and allow the temperature to stabilize before further adjustments.

External Appliance Control Display:
Use the external Appliance Control Display to control various functions:

• Press WATER to select water.
• Press CRUSH to select crushed ice.
• Press CUBE to select cubed ice.
• Press the dispenser light button to toggle the dispenser light on and off.

Side Door Appliance Control Display:
Use the Side Door Appliance Control Display to control various functions:

• Press and hold ICE MAKER for 3 seconds to turn the ice maker on/off.
• Press FREEZE BOOST to activate a faster rate for freezing food in the freezer.
• Press TEMP F-C to toggle between Fahrenheit and Celsius temperature units. Press and hold to lock the temperature setting.
• Press FREEZER to adjust the freezer temperature.
• Press REFRIGERATOR to adjust the refrigerator temperature.
• Press CLEAR ALERTS to reset any active and illuminated alarms (DOOR OPEN, HIGH TEMP, POWER OUT).
• Monitor the status of the water filter and air filter on the display. Press and hold WATER FILTER or AIR FILTER for 3 seconds to reset the filter status to GOOD.

Installing PureAir Ultra IITM Air Filter:

1. Pull the air filter housing straight out.
2. Remove the old filter and discard it (if applicable).
3. Unpack the new filter and place it inside the housing with the black side facing out, away from the housing wall.
4. Slide the housing back into position.
5. Activate or reset the AIR FILTER status light on the appliance control display.

Installing PurePour PWF-1TM Water Filter:
The water filter is located in the holder at the top right side of the refrigerator compartment.

Before you start

• What’s included in my literature packet?
  You have some extra items in your literature pack, including a PureAir Ultra II™ Air Filter and your Use & Care Manual. Flip over this guide for install instructions for your air filter. For more detailed information, reference your Use & Care Manual.

• Set up your refrigerator
  Prior to using the refrigerator, make sure it is located on a floor that is level and strong enough to support it fully loaded. Check out INSTALLATION in your Use & Care Manual.

• Before operating for the first time
  Clean the inside of your appliance before using it. See the CARE AND CLEANING section in your Use & Care Manual. To ensure safe food storage, allow the appliance to operate with the door closed for at least 8 hours before loading it with food.

You’re in control

Using your refrigerator starts with adjusting your controls in small increments, allowing the temperature to stabilize. See your Use & Care Manual for more details.

External Appliance Control Display

1. Press WATER to select water.
2. Press CRUSH to select crushed ice.
3. Press CUBE to select cubed ice.
4. Toggles the dispenser light on and off.
   Remember
   To maintain temperatures, a fan circulates air in the refrigerator and freezer compartments. For good circulation, do not block cold air vents with food items.

Side Door Appliance Control Display

1. Press and hold ICE MAKER for 3 seconds to turn the ice maker on/off.
2. Press FREEZE BOOST to activate a faster rate for freezing food in the freezer.
3. Press TEMP F-C to toggle from Fahrenheit to Celsius. Press and hold to lock the temperature setting.
4. Press FREEZER to adjust the freezer temperature. Control temperatures range from -6°F / -21°C to 4°F / -15°C.
5. Press REFRIGERATOR to adjust the refrigerator temperature. Control temperatures range from 33°F / 1°C to 43°F / 7°C.
6. Press CLEAR ALERTS to reset any active and illuminated alarms: DOOR OPEN, HIGH TEMP, POWER OUT
7. WATER FILTER / AIR FILTER
   The display shows the current status of the filter (GOOD, ORDER, or REPLACE). To reset the filter status to GOOD, press and hold WATER FILTER or AIR FILTER for 3 seconds.
   Your appliance control display is equipped with a sleep and an inactive mode to prevent accidental changes to the unit settings when you open and close the doors. See CONTROLS AND SETTINGS in your Use & Care Manual for details.

Keep it fresh

• Install your new PureAir Ultra II™ Air Filter to keep fresh air flowing (included in the refrigerator; install in the air filter housing located at the top left side of the refrigerator compartment)

  1. Pull the air filter housing straight out.
  2. Remove the old filter and discard it (if applicable).
  3. Unpack the new filter and place it inside the housing with the black side facing out, away from the housing wall.
  4. Slide the housing back into position.
  5. Activate or reset the AIR FILTER status light on the appliance control display

• Install your new PurePour PWF-1™ Water Filter to keep safe, great-tasting water flowing (included in the
  holder located at the top right side of the refrigerator compartment)

  1. Pull the air filter housing straight out.
  2. Remove the old filter and discard it (if applicable).
  3. Unpack the new filter and place it inside the housing.
  4. Slide the housing back into position.
  5. Activate or reset the AIR FILTER status light on the appliance control display.

• Install your new PureAir Produce Keeper™ Refill to extend the life of produce (included in the refrigerator;
  install in the housing located at the left side of the CrispSeal Plus crisper)

  1. Remove the outer plastic wrapper.
  2. Insert the unopened packet into the holder in the crisper.
     Change your filters every 6 months to ensure optimal fridge freshness.

FAQs

• My refrigerator is making unfamiliar sounds. Is this normal?
  Your new, high-efficiency unit may introduce unfamiliar sounds. These sounds normally indicate your appliance is operating correctly. See the NORMAL OPERATING SOUNDS section of your Use & Care Manual for more information.

• Why does my refrigerator run most of the time?

  • Today’s refrigerators are designed with a variable speed compressor to be more energy efficient than previous models.
  • This means your compressor reacts quickly to temperature fluctuations and circulates cold air based off your use and room temperature.

• What should I do if my ice maker is not making any ice in my refrigerator?

  • If your ice maker is not making any ice, check to see if the ice maker has been inadvertently turned off. Make sure the refrigerator is connected to the water line and/or the water valve is open. If your dispenser will not dispense water, check to see if the water filter is seated properly. Remove and reinstall the water filter until you hear it lock solidly into position.
  • Remember: the freezer needs up to 24 hours to stabilize after plugging it in before it produces ice.

• Can I adjust the shelves in my Side-by-Side refrigerator to fit my spacing needs?

  • Shelves are easily adjusted to suit individual needs. Before adjusting the shelves, remove all food.
  • Shelves are supported by side rails.
  • To adjust, lift up on the back of the shelf and pull forward.
  • Replace the shelf by sliding it on top of the formed rails on the side walls of the cabinet until the rear
    plastic hooks of the shelf lock into the rear of the cabinet liner.

Let’s make it official!

Take the first step to becoming a part of the Frigidaire family and discover more benefits by registering your side-by-side refrigerator.
Look for the PhotoregisterSM icon on your registration card.

Scan the QR Code to the right or visit frigidaire.com, frigidaire.ca for owner support

References

• Kitchen, Laundry, Home Appliances & Accessories | Frigidaire
• Frigidaire

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>