MORRIS WTL-80135 Washing Machine Instruction Manual

WTL-80135 Washing Machine
Instruction Manual

SAFETY INSTRUCTIONS

Safety Instructions
Please read the following safety information thoroughly and follow it strictly to minimize the risk of fire or explosion, electric shock and to prevent property damage, personal injury or loss of life. Failing to follow these instructions shall  void any warranty.
Warning!
This combination of symbol and signal word indicates a potentially dangerous situation which may result in death or serious injuries unless it’s avoided. ”
Caution!
This combination of symbol and signal word indicates a potentially dangerous situation which may result in slight or minor injuries or damage to property and the environment.
Note!
This combination of symbol and signal word indicates a potentially dangerous situation which may result in slight or minor injuries.
ELECTRIC SHOCK HAZARD

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• f the machine is damaged, it must not be operated unless repaired by the manufacturer, its service agent or similarly qualified persons. Risk of electric shock!
• The appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Children should be supervised that they do not play with the appliance.
• Children 3 years and under shall be kept away from the appliance or continuously supervised.
• Animals and children may climb into the machine. Check the machine before every operation.
• Do not climb or sit on the appliance.

INSTALLATION LOCATION AND SURROUNDING

• All washing and additional substances are to be kept in a safe place out of the reach of children.
• Do not install the machine on a carpet floor. The obstruction of the openings by a carpet can damage the machine.
• Keep the appliance clear from heating sources and direct sunlight to avoid plastic and rubber parts to corrode.
• Do not use the appliance in humid environments or rooms containing explosive or caustic gas. In case of water leakage or water splashes let the appliance dry in the open air.
• The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the washing machine.
• Do not operate the machine in rooms with a temperature of below 5°C. This can cause damages to parts of it. If it is unavoidable, make sure to drain the water completely from the appliance after every use (see „Maintenance –  cleaning of drain pump filter“) to avoid damages caused by frost.
• Never use flammable sprays or substances in the immediate proximity of the appliance.

INSTALLATION

• Remove all packaging material and transport bolts before using the appliance. Otherwise, serious damage may result.
• This appliance is equipped with a single inlet valve and can be connected to the cold water supply only.
• Mains plug must be accessible after installation.
• Before washing clothes for the first time, the product shall beoperated once throughout all the procedures without any clothes inside.
• Do not put any excessively heavy objects on the appliance, like water containers or heating devices.
• The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused.
• Max. Inlet water pressure 1 MPa. Min. inlet water pressure 0.1MPa.

ELECTRICAL CONNECTION

• Make sure the supply cable is not trapped by the machine, it can get damaged.
• Connect the product to a grounded outlet protected by a fuse complying with the values in the “ Technical specifications“ table. The grounding installation has to be made by a qualified electrician. Ensure that the machine is installed in accordance with the local regulations.
• Water and electrical connections must be carried out by a qualified technician in accordance with the manufacturer‘s instructions and local safety regulations.

Warning!

• Don´t use multiple plugs or extension cords.
• The appliance must not have an external switching device such as a timer or connected to a circuit that is regularly switched on and off.
• Do not pull the plug out of the mains outlet if there is flammable gas around.
• Never pull out power plug with wet hands.
• Always pull at the plug, not at the cable.
• Always unplug the appliance if it is not being used.

WATER CONNECTIONS

• Check the connections of the water inlet tubes, the water tap and the outlet hose for possible problems due to changes of water pressure. If the connections loosen or leak close the water tap and get it repaired. Do not use the appliance before the pipes and hoses are installed properly by qualified persons.
• Glass door may become very hot during the operation. Keep children and pets far away from the machine while it is operating.
• The water inlet and outlet hoses have to be safely installed and remain undamaged. Otherwise, water leakage can occur.
• Do not remove the drain pump filter while there is still water in the appliance. Big quantities of water can leak out, and there is a risk of scalding due to hot water.

OPERATION AND MAINTENANCE

• Never use any flammable, explosive or toxic solvents. Do not use gasoline and alcohol etc. as detergents. Only select detergents that are suitable for machine washing.
• Make sure that all pockets are emptied. Sharp and rigid items such as coins, brooches, nails, screws, stones etc. may cause serious damages to this machine.
• Remove all objects from pockets such as lighters and matches before use the appliance.
• Thoroughly rinse items that have been washed by hand.
• Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, wax and wax removers should be washed in hot with an extra amount of detergent before being dried in the appliance.
• Items containing foam rubber (latex foam), shower caps, water proof textiles, rubber backed articles and clothes or pillows fitted with foam rubber pads should not be dried in the machine
• Fabric softeners or similar products should be used as recommended in their instructions.
• Never try to open the door forcefully. The door will unlock shortly after the end of a cycle.
• Please do not close the door with excessive force. If it is found difficult to close the door, please check if the clothes are properly inserted and distributed.
• Always unplug the appliance and close the water tap before cleaning and maintenance and after each use.
• Never pour water over the appliance for cleaning purpose. Risk of electric shock!
• Repairs shall only be carried out by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. The producer will not be responsible for damages caused by the intervention of not authorized persons.

TRANSPORT

• Before Transport:
  -Bolts shall be reinstalled to the machine by a specialized person
  -Accumulated water shall be drained out of the machine
• This appliance is heavy. Transport with care. Never hold any protruding part of the machine when lifting. The machine door cannot be used as a handle.

INTENDED USE
The product is intended only for home use and for textiles in household amounts suitable for machine washing and drying. This appliance is for indoor use only and not intended for built in use.
Only use according to these instructions. The appliance is not intended for commercial use.
Any other use is considered as improper use. The producer is not responsible for any damage or injuries that may result of it.

• This appliance is intended to be used in household and similar applications such as:
  -Staff kitchen areas in shops, offices and other working environments;
  -Farm houses;
  -By clients in hotels, motels and other residential type environments;
  -Bed and breakfast type environments;
  -Areas for communal use in blocks of flats or in launderettes.

Packaging/Old appliance
This marking indicates that this product should not be disposed with other household wastes throughout the EU.To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the collection systems or contact the retailer where the product was purchased. They return and can take this product for environmental safe recycling.

INSTALLATION

Product Description Note!

• The product line chart is for reference only, please refer to real product as standard.

Accessories

Transport hole plug| Supply hose cold water| Owner’s manual| Acoustic sponge

Installation
Installation area
Warning!

• Stability is important to prevent the product from wandering!
• Make sure that the product should not stand on the power cord.

Before installing the machine, the location characterized follows shall be selected: as

1. Rigid, dry, and level surface
2. Avoid direct sunlight
3. Sufficient ventilation
4. Room temperature is above 0℃
5. Keep far away from the heat resources such as coal or gas.

Unpacking the washing machine Warning!

• Packaging material (e.g. Films, Styrofoam) can be dangerous for children.
• There is a risk of suffocation ! Keep all packaging well away from children.

1. Remove the cardboard box and styrofoam packing.
2.  Lift the washing machine and. remove the base packing. Make sure the small triangle foam is removed with the bottom one together. If not, lay the unit down with side surface, then remove the small foam from the unit bottom manually.
3.  Remove the tape securing the power supply cord and drain hose.
4.  Remove the inlet hose from the drum.

Remove transport bolts
Warning!

• You must remove the transport bolts from the backside before using the product.
• You’ll need the transport bolts again if you move the product , so make sure keep them in a safe place. you

Please take the following steps to remove the bolts:

1. Loosen 4 bolts with spanner and then remove them.
2. Stop the holes with transport hole plugs.
3. Keep the transport bolts properly for future use.

Remove transport bolts
Warning!

• You must remove the transport bolts from the backside before using the product.

Loosen the 4 transport bolts with a spanner.| Remove the bolts including the rubber parts
and keep them for future use.| Close the holes using the cover caps.

Levelling the washing machine
Warning!

• The lock nuts on all four feet must be screwed tightly against the housing.

1. Loosen the lock nut.
2.  Turn the foot until it reaches the floor.
3. Adjust the legs and lock the nuts with a spanner. Make sure the machine is level and steady.

Connect the water supply hose
Warning!
To prevent leakage or water damage, follow the instructions in this chapter

• Do not kink, crush or modify water inlet hose.

Connect the water supply hose to the water inlet valve and a water tap with cold water as indicated. Note!

• Connect manually, do not use tools. Check if the connections are tight.

Drain Hose
Warning!

• Position drain hose properly ,otherwise damage might result of water leakage.
• Do not kink or protract the drain hose.

There are two ways to place the end of drain hose:

1. Put it into the water trough.
2. Connect it to the branch drain pipe of the trough.

Note!

• If the machine has drain hose support, please install it like the following .

Warning!

• If drain hose is too long, do not force it into washing machine as it will cause abnormal noises.
• When installing drain hose, fix it properly with a rope.

Acoustic Sponge
Note!

• Please make sure to assemble the acoustic sponges, which can effectively reduce the noise caused by the machine while working, in order to provide you with a more peaceful and quiet living environment.

1. Get the machine laid on the floor, using some soft material like foam or clothes between the machine and floor for a protection;
2.  Stick the 2x longer sponges to the longer bottom edges of machine, and the 2x shorter sponges to the shorter bottom edges.

OPERATION

Quick Start
Caution!

• Before washing, please make sure the washing machine is installed properly.
• Your appliance was thoroughly checked before it left the factory. To remove any residual water and to neutralize potential odors, it’s recommended to clean your appliance before first use. For this reason, recommended to clean the inner drum by running the “Drum Clean” or other program with the optional temperature of 90°C. Be careful not to put laundry and detergent in the machine.

Before Washing

Open tap| Load| Plug in

Add detergent| Close drum door| Close machine door

• Check the roller before each laundry ,it must roll smoothly .

Note!

• Detergent need to be added in “case I “after selecting pre-washing for machines with this function.
• Make sure that the drum flaps are properly locked.

• All metal hooks must be properly hooked inside the rear door flap.

Washing

Power On| Select programme| Select function or remain
default settings| Press Start/Pause to
start the program

Note!

• Step 3 is optional.

After Washing
Buzzer beep or “End” on display.
Before Each Washing

• The ambient temperature of the washing machine should be 5-40°C. If used under 0°C, the inlet valve and draining system may be damaged. If the machine is installed under freezing conditions, it should be transferred to normal ambient temperature to ensure the water supply hose and drain hose can unfreeze before use.
• Please check your laundry care labels and the detergent use instructions before wash. Use non-foaming or less-foaming detergent suitable for machine washing properly.

Check the care label| Sort laundry according to color and textile type| Take all items out of the pockets

Tie together long textile strips and belts, close zips
and button| Put small items into a laundry bag| Turn easy-pilling and long- pile fabric inside out

Warning!

• Do not wash or dry articles that have been cleaned in, washed in, soaked in, or dabbed with combustible or explosive substances like wax, oil, paint, gasoline, alcohol, kerosene, and other flammable materials.
• Washing single clothes items may easily create big eccentricity and cause alarm due to unbalance. Therefore it is suggested to add one or two more laundry items to the wash so that spin can be done smoothly.
• Do not wash,spin,or dry water-proof seats,mats,or clothing.

Detergent Dispenser
Pre wash detergent
Main wash detergent
Softener
Caution!

• Detergent only need to be added in “case I “after selecting pre-washing for machines with this function.
• Do not exceed the “MAX”level mark when filling in detergent, additives or softener.

Programme| | |
---|---|---|---
My Cycle| | |
Cotton| | |
Synthetics| | |
Mix| | |
Drum Clean| | |
20℃| | |
Intensive| | |
Spin Only| | |
Rinse & Spin| | |
Wool| | |
Baby Care| | |
Quick 15’| | |
ECO 40-60| | |
Bed Linen| | |

Means must  Means optional
Detergent Recommendation

Recommended washing detergent| Wash cycles| Washing temp.| Type of laundry and textile
---|---|---|---
Heavy-duty detergent with bleaching agents and| Cotton, ECO 40-60,Mix| 20/| White laundry made from
optical brighteners| | 40/60| boil-proof cotton or linen
Colour detergent without| | Cold/20/| Coloured laundry made
bleaching agent and optical brighteners| Cotton,EC040-60,Mix| 40| from cotton or linen
Color or mild detergent without optical brighteners| Synthetics| Cold/20/ 40| Coloured laundry made from easy care fibers or synthetics materials
Mild washing detergent| Synthetics| 20/40| Delicate textiles, silk, viscose
Special wool detergent| Wool| 20/40| Wool

Note!

• Agglomerating or ropy detergent or additive can be diluted in some water before pouring it into the detergent dispenser, to avoid its inlet to get blocked and thus cause a water overflow.
• Please choose the suitable type of detergent to get a maximum of washing performance and a minimum of water and energy consumption
• To achieve the best cleaning result a proper detergent dosing is important.
• Use a reduced detergent amount if the drum is not filled completely.
• Always adjust the amount of detergent to the water hardness, if your tap water is soft, use less detergent.
• Dose according to how dirty your laundry is, less dirty clothes require less detergent.
• ighly concentrated (compact detergent) requires particularly accurate dosing.
  Following symptoms are a sign of detergent overdosing:
  – heavy foam formation
  – poor washing and rinsing result
  Following symptoms are a sign of detergent underdoing:
  – laundry turns grey
  – built-up of limescale deposits on the drum, the heating element and/or the laundry

Control Panel
Model: WTL-80135

1. Power
   Product is on/off.

2. Start/Pause
   Press the button to start or pause the washing cycle.

3. Option
   This allows you to select an additional function and will light when selected.

4. Programmes
   Available according to the laundry type.

5. Display
   The display shows the settings, estimated time remaining, options, and status messages for your washer. The display will remain on through the cycle.

A Display

|
Door Lock| Delay
---|---
Pre Wash| Extra Rinse
Spa Care| Pre Wash
Wash| Rinse
Spin| Child Lock

Programmes
Model:WTL-80135

Note!

• The parameters in this table are only for user’s reference. The actual parameters maybe different with the parameters in above mentioned table.

Programmes

• The above data is for reference only, and the data may change due to different actual use conditions.
• The valves given for programmes other than the ECO 40-60 programme are indicative only.
•  0°C program is able to clean lightly soiled cotton laundry, at a nominal temperature of 20 °C, which complies with the regulation (EU) 2019/2023.
• concerning to EN 60456:2016/A11:2020 With (EU)2019/2014, (EU)2019/2023, (EU)2021/340,(EU)2021/341 The EU energy efficiency class is: A Energy test program: ECO 40-60. Other as the default. Half load for 8.0kg  machine:4.0kg. Quarter load for 8.0kg machine:2.0kg.

1. The highest temperature reached by the laundry in the wash cycle for at least 5 minutes.
2.  Residual moisture after the wash cycle in water content percent and the spin speed at which this was achieved.
3.  The ECO 40-60 programme is able to clean normally soiled cotton laundry declared to be washable at 40°C or 60°C, together in the same cycle. This programme is used to assess the compliance with the regulation (EU) 2019/2023.
   The most efficient programmes in terms of energy consumption are generally those that perform at lower temperatures and longer duration.
   Loading the household washer up to the capacity indicated for the respective programmes will contribute to energy and water savings.
   Noise and remaining moisture content are influenced by the spinning speed: the higher the spinning speed in the spinning phase, the higher the noise and the lower the remaining moisture content.

Caution!

• If there is any break in the power supply while the machine is operating, a special memory stores the selected programme. The machine will continue the programme when the power supply is re-established.

Programmes
Programmes are available according to the laundry type.

Programmes|
---|---
Cotton| Hard-wearing textiles, heat-resistant textiles made of cotton or linen.
Synthetics| Wash synthetics articles, for example: shirts, coats, blending. While washing the knitting textiles, detergent quantity shall be reduced due to its loose string construction and easily forming bubbles.
Baby Care| soju the baby’s clothes, it can make the baby’s wear cleaner and make the rinse performance better to protect the baby skin.
Mix| Mixed load consisting of textiles made of cotton and synthetics.
Bed Linen| ticking the bed Linen.
Quick 15′| ESA short programme approx., suitable for lightly soiled washing as a small amounts of laundry.
Wool| Hand or machine-washable wool or Richwood textiles. Especially cETL wash programme to prevent shrinkage, longer programme pauses (textiles rest in wash liquor).
Spin Only| Spins and drains the water
Rinse Spin| Rinses and then spins the laundry, and then drains the water.
Drum Clean| Specially set in this machine to clean the drum and tube. It applies 90 °C high temperature sterilization to make the clothes washing more green. When this programme is performed, the clothes or other washing cannot be added. When proper amount of chlorine bleaching agent is put in, the barrel cleaning effect will be better. The customer can use this programme regularly according to the need.
ECO 40-60| Default 40;aot selectable, suitable for laundry washing at about 40260:c
Intensive| To increase the washing effects, washing time is increased. Washing
20°C| brightly colored clothes, it can protect the colors better .

Option

Cycle|

Default Temp.(℃)

| Default spin speed in rpm| Additional functions
---|---|---|---
Wash cycles| | 1300|
My Cycle| 40| 800|
Cotton| 40| 800|
Synthetics| 40| 800|
Mix| 40| 800|
Bed Linen| 40| 800|
20℃| 20| 800|
Baby Care| 60| 800|
Drum Clean| 90| —|
Spin Only| —| 800|
Rinse & Spin| —| 800|
Wool| 40| 600|
Intensive| 40| 800|
ECO 40-60| —| 1300|
Quick 15’| Cold| 800|

Note!

• For the maximum spin speed, program time, and other details of the ECO 40-60 program, please refer to the content on the Product Fiche page.
• The table shows which cycle offers which options for adjustment. If an adjustment is not possible for a cycle.

Pre Wash
The Prewash function can get an extra wash before main wash, it is suitable for washing the dust rises to surface of the clothes;You need to put detergent into the Case (I) when select it.
Extra Rinse
The laundry will undergo extra rinse once after you select it.
Delay
Set the Delay function:

1. Select a programme;
2. Press the Delay button to choose the time (the delaying time is 0-24 H);
3. Press [Start/Pause] to commence the delay operation

Cancel the Delay function:
Press the [Delay] button until the display be 0H.It should be pressed before starting the programme. If the programme already started, should switch off programme to reset a new one.
Caution!

• If there is any break in the power supply while the machine is operating, a special memory stores the selected programme and when the power is restarted, the program will continue.

Temp.
Press the button to regulate the temperature(Cold,20 30℃, 40℃,60℃,90℃) ℃,
Speed
Press the button to change the speed. 0-400-600-800-1000-1200-1300
Spa Care
Spa Care function can be selected by choose “Cotton”, “Mix“ ”Bed Linen” and “Baby Care”.
The customers can see the steam in the drum when operate Spa Care function.
My Cycle
To memory the frequently used programme.
After choosing the programme and setting the options, press [Temp.] 3 sec. before start to wash. The default setting course is Cotton.
Child Lock
To avoid mist operation by children. Caution!

• When the Child Lock is activated, the display will alternately show “CL” and the remaining time.
• Pressing any other button will cause the Child Lock indicator to flash. When the program ends, “CL” and “END” will alternate on the display.
• The Child Lock deactivates the function of all buttons except the On/Off button and the Child lock button!
• Only the simultaneous pressing of the two buttons [Function] and [Delay] can deactivate the Child Lock!
•  Please deactivate the Child Lock before selecting a new program!

Mute the buzzer

Choose the Programme| Press the [Speed]button for 3sec., the buzzer is mute.

To act the buzzer function, press the button again for 3 seconds. The setting until the next reset. will be kept
Caution!

• After muting the buzzer function, the sounds will not be activated any more.

Note!
Usage counter

1. Unplug the equipment for 10s and reconnect again.
2. Power on and within 10s, please press ” Temp.” and “Sp aCare” on control panel for around 5s until the device display shows digits–the value can indicate the times of equipment usage.
3. Repeat step 1 again and customer can resume to normal operation.

MAINTENANCE

Cleaning and Care
Warning!

• Before your maintenance starts, please unplug the machine and close the tap.

Cleaning The Cabinet
Proper maintenance on the washing machine can extend its working life. The surface can be cleaned with diluted non-abrasive neutral detergents when necessary. If there is any water overflow, use the wet cloth to wipe it off immediately. No sharp items are allowed. Note!

• Formic acid and its diluted solvents or equivalent are forbidden, such as solvents or chemical products, etc alcohol,

Cleaning The Drum
The rusts left inside the drum by the metal articles shall be removed immediately with chlorine-free detergents. Never use steel wool.
Note!

• Don’t put laundry in the washing machine during the drum cleaning.

Cleaning the Inlet Filter
Note!

• Diminishing water flow is a sign that the filter need to be cleaned.

1. Close the tap and remove the water supply hose from it.
2.  Clean the filter with a brush.
3.  Unscrew the water supply hose from the backside of the machine. Pull out the filter with long nose pliers.
4.  Use a brush to clean the filter.
5.  Reinstall the filter to the water inlet and reconnect the water supply hose.
6.  Clean the Inlet filter every 3 months to ensure the normal operation of the appliance.

Clean The Detergent Dispenser

1. Press down the arrow location on softener cover inside the dispenser drawer.
2. Lift the clip up and take out softener cover and wash all grooves with water.
3. Restore the softener cover and push the drawer onto position.

Pull out the dispenser drawer with press the A| Clean the dispenser drawer under water| Insert the dispenser drawer

Note!

• Do not use abrasive or caustic agents to clean plastic parts.
• Clean the detergent dispenser every 3 months to ensure the normal operation of the appliance.

Cleaning the Drain Pump Filter
Warning!

• Make sure that the machine has finished the washing cycle and is empty. Switch it off and unplug it before cleaning the drain pump filter.
• Be careful of hot water. Allow the water to cool down. Risk of scalding!
• Clean the filter periodically every 3 months to ensure the normal operation of the appliance.

Open the lower cover cap| Open the filter by turning to the counter clockwise

Remove extraneous matter| Close the lower cover cap

Trouble Shooting
The start of the appliance does not work or it stops during operation. First try to find a solution to the problem, If not, contact the service centre.

the door is closed Check if the clothes is stuck
Door can’t be opened| Washer’s safety protection design is working| Disconnect the power, restart the product
Water leakage| The connection between inlet pipe or outlet hose is not tight| Check and fasten water pipes Clean up outlet hose
Detergent residues in the box| Detergent is dampened or agglomerated| Clean and wipe the detergent box
Indicator or display does not light| Disconnect the power PC board or harness has connection problem| Check if the power is shut down and the power plug is connected correctly
Abnormal noise| | Check if the fixing (bolts) have been removed it’s installed on a solid and level floor Check

LED display models:

clothes is stuck
| Water injecting problem while washing| Check if the water pressure is too low Straighten the water pipe Check if the inlet valve filter is blocked
| Overtime water draining| Check if the drain hose is blocked
| Water overflow| Restart the washer
| Others| Please try again first, call up service line if there are still troubles

Note!

• After the check, activate the appliance. If the problem occurs or the display shows other alarm codes again, contact the service.

Warning!
Risk of electric shock

• Never try repair an appliance which is defective of presumed to be defective.
  You may put your own and future users’ lives in danger. Only authorised specialists are allowed to carry out this repair work.

•  Improper repair will void the warranty and subsequent damages can’t be recognized!

Transport
IMPORTANT STEPS WHEN MOVING THE APPLIANCE

• Unplug the appliance and close the water inlet tap
• Check, if the door and the detergent dispenser are closed properly.
• Remove the water inlet pipe and the outlet hose from the house installations.
• Let the water drain completely from the appliance (see “Maintenance Cleaning the drain pump filter”)
• Important: Re-install the 4 transport bolts in the back of the appliance.
• This appliance is heavy. Transport with care. Never hold any protruding part of the machine when lifting. The machine door cannot be used as a handle.

Technical Specifications

Model| Washing Capacity| Dimension (WDHmm)| Net Weight| Rated Power
---|---|---|---|---
WTL-80135| 8.0kg| 400610875| 56kg| 1900W

Supplier’s name or trade mark(a)’n: MORRIS
Supplier’s address(ar(c): 17th November 87A , P.C. 55535, Pylea, Thessaloniki , Greece
Model identifier( ):WTL-80135
General product parameters:

Energy consumption in kWh per cycle, based on the eco 40-60 pro- gramme. Actual energy consump- tion will depend on how the appli- ance is used.| 0.472| Water consumption in litre per cycle, based on the eco 40-60 c
ramme
p rog . Actual water con-
sumption will depend on how the appliance is used and on the hardness of the water.| 48
Maximum temperature inside the treated textile 6 (°C)| Rated
capacity| 38| Weighted remaining moisture
content 6 (%)|
Half| 32
Quarter| 23
Spin speed (b) (rpm)| Rated
capacity| 1250| Spin-drying efficiency class (b)| B ( d)
Half| 1250
Quarter| 1250
Programme duration (b) (h:min)| Rated
capacity| 3:38| Type| free-standing
Half| 2:48
Quarter| 2:48
Airborne acoustical noise emissions in the spinning phase
(3)
(dB(A) re 1 pW)| 78| Airborne acoustical noise emission class (b) (spinning phase)| (d)
Off-mode (W) (if applicable)| 0.50| Standby mode (W) (if applicable:| N/A
Delay start (W) (if applicable)| 4.00| Networked standby (W) (if applicable)| N/A

Minimum duration of the guarantee offered by the supplier CA): 24 months
This product has been designed to release silver ions during the washing cycle : NO
Additional information:
Weblink to the supplier’s website, where the information in point 9 of Annex II to Commission Regulation (EU) 2019/2023 (1) is found: www.morris.gr
(a) this item shall not be considered relevant for the purposes of Article 2
(b) of Regulation (EU) 2017/1369. (b) for the eco 40-60 programme.
(C) changes to this item shall not be considered relevant for the purposes of paragraph 4 of Article 4 of Regulation (EU) 2017/1369.
(d) if the product database automatically generates the definitive content of this cell, the supplier shall not enter these data.

1. The actual energy consumption will depend on how the appliance is used.
2.  The actual water consumption will depend on how the appliance is used and on the hardness of the water.
3. Delivery of the spare parts within 15 working days after having received the order. Product Data Sheet concerning (EU) 2019/2014 The product data sheet for your appliance can be found online. Go to https://eprel.ec.europe.eu and enter the model identifier for your appliance to download the data sheet.
   The model identifier for your appliance can be found in the technical specifications section.

NOTICE ABOUT RECYCLING
Your product is designed and manufactured with high quality materials and components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-of- life, should be disposed of separately from your household waste. Please dispose of this equipment at your local community waste collection/ recycling centre.
In the European Union there are separate collection systems for used electrical and electronic products. Please help us to conserve the environment we live in!
DECLARATION OF CONFORMITY
In the European Union there are separate collection systems for used electrical and electronic products. Please help us to conserve the environment we live in!
Herewith, we state that this product complies with the requirements of below directives:
EMC-Directive: 14 / 30 / EU Low Voltage Directive: 14/ 35 / EU ErP Directive 09 / 125 / EC CE Marking: 93 / 68 / EEC RoHS Directive: 11 / 65 / EU & Delegated Directive (EU) 15 / 863 The detailed declaration of conformity can be found at www.morris.gr

IMPORTER:
Kalliopi Karyda & Co, LP
87A, 17th November str.
55535, Plea, Thessaloniki
Tel. 2316 006600
Fax. 2316 006650
www.morris.gr

References

• Home - Morris

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>