SIGNATURE HARDWARE 953784 1 Robe Hook in Polished Nickel Instruction Manual
- June 13, 2024
- Signature Hardware
Table of Contents
SIGNATURE HARDWARE 953784 1 Robe Hook in Polished Nickel
Product Information
- Product Name: LEXIA
- SKU: 953784, 953785, 953786, 953787, 953788
- Manufacturer: Signature Hardware
Product Usage Instructions
- Before starting the installation, it is recommended to consult a professional if you are unfamiliar with installing plumbing fixtures. Signature Hardware is not liable for any damage or personal injury during installation.
- Unpack and inspect the product for any shipping damage. If any damage is found, contact the Customer Relations team via live chat at www.signaturehardware.com or by emailing support@signaturehardware.com.
- Gather all the required materials needed for the installation.
- Level the desired location on the wall and lightly mark the outline of the post using the template screw hold markings.
- If mounting into a wood wall, fasten the mounting bracket flush into the wall with a wood screw without drilling the holes.
- Drill a 1/4 inch hole in the drywall and push plastic anchors flush into the drywall. Fasten the mounting bracket to the wall with a wood screw.
- Place the post over the mounting bracket and secure it with set screws.
If you have additional questions or need further assistance, you can visit the Help Center at www.signaturehardware.com for product and warranty information. You can also contact the support team through live chat or by emailing support@signaturehardware.com.
BEFORE YOU BEGIN
We recommend consulting a professional if you are unfamiliar with installing
plumbing ?xtures. Signature Hardware accepts no liability for any damage to
the faucet, plumbing, sink, counter top, or for personal injury during
installation.
Observe all local plumbing and building codes. Unpack and inspect the product
for shipping damage. If any damage is found, contact our Customer Relations
team via live chat at www.signaturehard-ware.com or by emailing support
@signaturehard-ware.com.
TOOLS AND MATERIALS
INSTALLATION
-
Unscrew set screw at base of each post. Use the template screw hold marking (A and C) to place the desired location for the 18″ Towel Bar (A and D for the 24″ Towel Bar, A and B for Pivoting Tissue Holder). Position on wall where desired. Lightly mark outline of post
-
Center mounting bracket horizontally in outline of posts. Verify mounting point with level.
-
Drill 1/4″ hole in the drywall. Push plastic anchors fush into the drywall. Fasten mounting bracket to wall with wood screw.
- If mounting into a wood wall, fasten mounting bracket fush into the wall with wood screw without drilling the holes.
- Place post over mounting bracket and secure with set screws.
1.855.715.1800
signaturehardware.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>