R V R Elettronica TX2000 FM Transmitter User Manual
- June 13, 2024
- R V R ELETTRONICA
Table of Contents
R V R Elettronica TX2000 FM Transmitter
Product Information
This product is a FM transmitter manufactured by R.V.R. Elettronica SpA in Italy. It is designed for FM audio broadcasting and utilizes operating frequencies that may not be harmonized in the intended countries of use. The user must obtain a license before using the product in the intended country of use and ensure compliance with respective country licensing requirements. Limitations of use can apply in respect of operating frequency, transmitter power, and/or channel spacing.
The TX2000 FM transmitter is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Contact Information:
- Manufacturer: R.V.R. Elettronica SpA
- Address: Via del Fonditore 2/2c – 40138 – Bologna (Italia)
- Telephone: +39 051 6010506
- Fax: +39 051 6011104
- Email: info@rvr.it
- Website: www.rvr.it
Product Usage Instructions
The TX2000 FM transmitter is a modular device assembled in a 19″ rack, complete with electrical and RF wiring. It is available in different configurations to meet various needs, such as redundancy or telecontrol capabilities.
Please note that the layouts and configurations of the transmitter may vary, and the specific details will be provided at the time of placing the order.
For detailed information on warranty, safety, working principles, and technical specifications, refer to the individual manuals of the different components attached to the transmitter.
Below are the available configurations:
- 2.2 TX2KSSRD/RDS: This version of the transmitter includes redundant exciters and RDS coders.
- 2.3 TX2KSSRD: This version of the transmitter includes redundant exciters.
- 2.4 TX2KSSD/RDS: This version of the transmitter includes redundant exciters and RDS coders.
- 2.5 TX2KSSD: This version of the transmitter includes redundant exciters.
- 2.6 TX2KSSR/RDS: This version of the transmitter is tele-controllable and includes the RDS coder.
- 2.7 TX2KSSR: This is the simplest telemetrized version of the TX500SS.
- 2.8 TX2000SS/V2: This is another version of the transmitter.
Manufactured by Italy
Notification of intended purpose and limitations of product use
This product is a FM transmitter intended for FM audio broadcasting. It
utilises operating frequencies not harmonised in the intended countries of
use.
The user must obtain a license before using the product in intended country of
use. Ensure respective country licensing requirements are complied with.
Limitations of use can apply in respect of operating freuency, transmitter
power and/or channel spacing.
Declaration of Conformity
Hereby, R.V.R. Elettronica SpA, declares that this FM transmitter is in
compliance with the essential requirements and other relevant provisions of
Directive 1999/5/EC.
- File name: capitoli_en.p65
- Version: 1.0
- Date: 02/12/2002
Revision History
TX2000 – User Manual
Versione 1.0
© Copyright 2002
R.V.R. Elettronica SpA
Via del Fonditore 2/2c – 40138 – Bologna (Italia)
Telefono: +39 051 6010506
Fax: + +39 051 6011104
Email: info@rvr.it
Web: www.rvr.it
All rights reserved
Printed and bound in Italy. No part of this manual may be reproduced,
memorized or transmitted in any form or by any means, eletronic or mechanic,
including photocopying, recording or by any information storage and retrieval
system, without the permission of the copyright owner.
Introduction
This manual describes the TX2000SS, a radio transmitter forfrequency
modulation audio broadcasting.
The TX2000SS is a modular device, built up of components assembled in a 19”
rack, complete with electrical and RF wiring.
This manual shall be read together with the manuals of the different
components, that are attached herewith.
Details about warranty, safety, working priciples and technical specifications
are given in the single manuals.
Configurations
General
The essential components of the TX2000 are:
- 1 PTX30LCD/s Exciter;
- 1 PJ2000M Amplifier:
- 2 PJ1000M LCD amplifiers;
- 1 HC2 hybrid coupler.
Different configurations of the transmitter are available. The costumer will
choose the one that best fits his need in terms, e.g. of redudancy or
telecontrol capabilities.
This chapter describes the different configurations the TX2000 can have.
Please note that transmitters layouts given herein are reference ones; the
height of the racks and the disposition of the modules may vary and will be
specified at the time of placing the order. The names of the different
transmitters refer to the components included.
TX2KSSRD/RDS
This version is the most complete version of the TX2000SS. With respect to the “essential” components, it features:
- Double exciters (2 PTX30LCD/s);
- Double RDS encoders (2 TRDS4001);
- Automatic change-over (SCM1+1 LCD);
- Telemetry unit (TLC300);
Of course, it also includes the PJ2000M RF amplifier.
TX2KSSRD
This version of the transmitter gives to the customer the benefit of redundant exciters and remote control. It is composed of:
- Double exciters (2 PTX30LCD/s);
- Automatic change-over (SCM1+1 LCD);
- Telemetry unit (TLC300);
- Amplifier (PJ2000M).
TX2KSSD/RDS
This version of the transmitter gives redundant exciters and RDS coders. It consists of:
- Double exciters (2 PTX30LCD/s);
- Double RDS encoders (2 TRDS4001);
- Automatic change-over (SCM1+1 LCD);
- Amplifier (PJ2000M).
TX2KSSD
This version is composed of:
- Double exciters (2 PTX30LCD/s);
- Automatic change-over (SCM1+1 LCD);
- Amplifier (PJ2000M).
TX2KSSR/RDS
This version of the transmitter is tele-controllable and includes the RDS coder. It is composed of:
- Exciter (PTX30LCD/s);
- RDS encoder (TRDS4001);
- Telemetry unit (TLC300);
- Amplifier (PJ2000M).
TX2KSSR
This is the simplest telemetrized version of the TX500SS. This version is composed of:
- Exciter (PTX30LCD/s);
- Telemetry unit (TLC300);
- Amplifier (PJ2000M).
TX2000SS/V2
This version is composed of:
- Exciter (PTX30LCD/s);
- Amplifier (PJ2000M).
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>