SIGNATURE HARDWARE 9894283 Wall Mount Toilet Tissue Holder Installation Guide
- June 13, 2024
- Signature Hardware
Table of Contents
SIGNATURE HARDWARE 9894283 Wall Mount Toilet Tissue Holder
Product Information
- Product Name: Lexia Toilet Paper Holder
- SKU: 953787
- Code: SHLETH
- Installation Type: Wall Mount
- Design: Modern
- Material: Metal
- Length: 6-5/8
- Height: 4-3/16
- Depth: 2-1/4
- Base Plate Diameter: 2-3/16
- Mounting Hardware Included: Yes
- Mounting Hardware Concealed: Yes
- Assembly Required: No
- Number of Rails: 1
- Centers: Single
All dimensions and specifications are nominal and may vary. Use actual products for accuracy in critical situations. Please refer to the website for warranty information signaturehardware.com
Product Usage Instructions
- Choose a suitable location on the wall to mount the Lexia Toilet Paper Holder.
- Ensure the surface is clean and dry before installation.
- Hold the base plate of the holder against the wall at the desired height.
- Mark the mounting hole positions on the wall using a pencil or marker.
- Drill pilot holes into the marked positions using an appropriate drill bit size.
- Insert the provided mounting hardware into the pilot holes.
- Tighten the mounting hardware securely to ensure proper installation.
- Gently slide the toilet paper roll onto the rail of the holder.
- Ensure the roll is securely held in place.
- Adjust the position of the holder if necessary for optimal convenience.
FEATURES
- Installation Type: Wall Mount
- Design: Modern
- Material: Metal
- Length: 6-5/8″
- Height: 4-3/16″
- Depth: 2-1/4″
- Base Plate Diameter: 2-3/16″
- Mounting Hardware Included: Yes
- Mounting Hardware Concealed: Yes
- Assembly Required: No
- Number of Rails: 1
- Centers: Singleu
DIMENSIONS
SHLETH
All dimensions and specifications are nominal and may vary. Use actual products for accuracy in critical situations..
See Website For Warranty Information
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>