SIGNATURE HARDWARE 459739 Elongated Bidet Toilet Seat Instruction Manual

BROOKDALE
ELONGATED BIDET TOILET SEAT
SKU: 459739

BEFORE YOU BEGIN

We recommend consulting a professional if you are unfamiliar with installing plumbing fixtures. Signature Hardware accepts no liability for any damage to the  plumbing, toilet, or for personal injury during installation.
Observe all local plumbing and building codes.
Unpack and inspect the product for shipping damage.
If any damage is found, contact our Customer Relations team at 1-800-221-3379.
GETTING STARTED
Ensure that you have gathered all the required materials that are needed for the installation.

**TOOLS AND MATERIALS:

**

|
---|---
Adjustable Wrench| Phillips Screwdriver

NAME OF PARTS

COMPONENTS

1. Main body
2. Installation template
3. Fixing Components
   | | | |
   ---|---|---|---|---
   Connecting bolts (2)| Expansive nuts (2)| Sliding plates (2)| Nut (2)| Adaptable panel (1)
4.  T-shaped connector
5. Water hose
6. Installation and User Manual

NOTE: There are two methods for installation. The way of employing expansive nuts is recommended. Another way is using butterfly nuts.
Please choose one for specific case

INSTALLATION

Please make sure you read the instructions carefully and install it properly.
CAUTION

1. The water pressure limit is from 0.07 to 0.8 MPa (10 to116 PSI). Please use as instructed
2. The water shutoff valve should be near where the product can be installed and dismantled

PRE-INSTALLATION

1. Insert the connecting bolts in adjusting pieces. As illustrated, insert the connecting bolts in the holes of adjusting pieces.
2. Insert connecting bolts with adjusting pieces in the adaptable panel. As illustrated, insert the connecting bolts in the holes of adjusting pieces in the holes of the adaptable panel.

INSTALLATION
FIRST INSTALLATION METHOD (RECOMMENDED)

1. Dismantle the old seat and seat lid. Loosen the hinge and remove the old seat and seat lid.
2. Install expansive nuts. As illustrated, insert expansive nuts in the holes of the ceramic
3. Install installation template. As illustrated, install the installation template on the ceramic.
4. Fix the adaptable panel. As illustrated, take the adaptable panel to the holes of the ceramic. Adjust position for connecting bolts and adjusting pieces, make the connecting bolts aim at according expansive nuts. Then fix the adaptable panel.
5. Take a way the installation template. Install the product. Keep the fix slots under the product aim at slots on the adaptable panel. Push the product to the end as illustrated to the left. This completes installation.

ELONGATED BIDET TOILET SEAT
Second installation method

1. Refer to first installation method step 1 and 3. Dismantle the old seat and lid. Put the installation template on the ceramic.
2. Refer to fist installation method step 4. Take the adaptable panel to the holes of the ceramic. Adjust position of the connecting bolts with adjusting pieces. Screw in the nuts form underside of the ceramic. Then fix the adaptable panel.
3. Refer to first installation method step 5 and 6. Complete following installation procedure.

Connecting water hose

1. Close the water valve and detach water pipe from the water tank. Connect the T-shaped connector to the water tank. Make sure that rubber packing is inserted in between.

2. Connect the water pipe to the T-shaped connector.
   Note: Please remove the regulator cover and regulate o-ring under the following conditions:
   A. When the water dynamic pressure is lower than 7.25 PSI, especially using the family tank.
   B. When the nozzle cannot work normally and water is low.
   1. Take out the regulator with pliers and other tools.
   2. Remove the regulator cover and regulate o-ring except the sealing o-ring.
   3. Insert the regulator component into the inlet pipe.
   Caution: Must use the regulator cover and regulate o-ring when the water pressure is bigger than 14.5 PSI

3. Press the filter and washer at the two ends of water hose into the screw tube, then connect the main body and T-shaped connector with water hose.

4. Open the water valve to check if there is any leakage.

WARNING

1. Do not lift the product with the seat cover and seat open. This may cause a mechanical trouble.
2. The water supply can’t be above 104 Degree F or below 32 degrees F.

**Operation

**

WASH

• Turn the lever clockwise from the vertical position.
• Nozzle for WASH moves forward and start the function.
• The water volume changes with the turning of lever.

BIDET

• Turn the lever anticlockwise from the vertical position.
• Nozzle for BIDET moves forward and start the function.
• The water volume changes with the turning of lever.

Off and Self-cleaning (Self-cleaning is an optional feature)

• Keep the lever at the 90˚ position when not in use.
• Position the lever at 25° before each use, then hold for a few seconds, it should clean the wand, and once product is connected, warm water should empty the cold water.
• The wand cleans itself after each use. For additional flush clean of the wand, position the lever at 25˚ for a few seconds and then reposition back to 90˚.

Clean and Dismantle

1. Clean the outside parts of the product. Use a smooth sponge/cloth with diluted kitchen detergent to clean the product. Do not use the following types: hydrogen chloride detergent, painting thinner, benzene, abrasive paper, polishing agent, fragrance and insecticide.

2. Clean the nozzle.
   Pull out the nozzle softly and use smooth cloth/sponge or toothbrush with kitchen detergent to clean the nozzle.

3. Clean the filter and regulator (If the water flow is smaller than usual)
   A. Clean the filter for both sides. Make sure to disconnect the water supply hose during cleaning.
   B. Clean the regulator o-ring (See the step 2 on the page 5 to find how to remove and install the regulator o-ring).

4. Remove the main body.
   Close the lid. Push the dismantlement button and pull out the product as the arrow indicates in the figure.
   Then the product will be dismantled.

Product maintenance

Lever replacement

• As per figure A, rotate the lever to the highest wash volume.
• As per figure B, Remove the old lever along the axis direction.
• As per figure C, insert the new lever rib into the corresponding control valve slot.
  The installation is completed with a “click” sound.

Nozzle replacement

• As per figure A, pull out the tube and do not release; then, remove the old nozzle along the axis direction.
• As per figure B, insert the new nozzle into the tube along the corresponding slot. The nozzle replacement is completed.

Regulator replacement

• Rotate the lever in the working position, clip out the regulator from the inlet tube by pliers.
• Press the new regulator into the bottom of the inlet tube. The regulator replacement is completed.
• Then rotate the lever back to non-working position.

Water hose leaking solution

• If water leaks from the two ends of water hose, re-tighten the nuts to avoid water leaking.

Self Diagnosis and Troubleshooting

to biggest volume
When water supply pressure is lower than 0.7kgf/c, contact local department for water pressure question
No water comes out during WASH/BIDET| 1. Water shut-off valve is turned off
2. Filter net of T-shaped connector is stuck
3. Filter net of water inlet hose is stuck
4. Nozzle head is stuck
5. External water pressure is low| Turn on the water shut-off valve
Clean the filter net of T-shaped connector
Clean the filter net of water inlet hose
Take off and clean the nozzle head
Increase external water pressure
Water dropping from bowl when using the unit| External water pressure is too big| The maximum water pressure of the unit is 116 psi. If water supply pressure is higher than that, please contact local department for water pressure question.

If any failure still occurs after above troubleshooting, please contact local service.

customer service: 1.800.221.3379
signaturehardware.com
REVISED 11/02/2022
CODES: SHBD300

Documents / Resources

| SIGNATURE HARDWARE 459739 Elongated Bidet Toilet Seat [pdf] Instruction Manual
459739, 459739 Elongated Bidet Toilet Seat, Elongated Bidet Toilet Seat, Bidet Toilet Seat, Toilet Seat, Seat
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>