better bathrooms ARIMB013 Brushed Brass 355mm Wall Arm User Manual

June 13, 2024
Better Bathrooms

ARIMB013 Brushed Brass 355mm Wall Arm
User Manual

ARIMB013 Brushed Brass 355mm Wall Arm

Thank you for choosing Better Bathrooms.
Please read this manual before installing your product and keep for future reference.

Product

ARIMB013 – Arissa Matt Black 120mm Ceiling Arm
ARIBB014 – Arissa Brushed Brass 120mm Ceiling Arm
ARIMB014 – Arissa Matt Black 355mm Wall Arm
ARIBB015 – Arissa Brushed Brass 355mm Wall Arm
ARIMB015 – Arissa Matt Black 250mm Slim Shower Head
ARIBB016 – Arissa Brushed Brass 250mm Slim Shower Headbetter bathrooms
ARIMB013 Brushed Brass 355mm Wall Arm - Brushed

  • Single-person assembly
  • We always recommend using professional tradespeople to install your product
    V3_22/9/2022

Congratulations on your purchase
And welcome to our growing gang of savvy shoppers
We’re on a mission to bring you extraordinary bathroom products, for less. From modern to traditional style ceramics, plus the gorgeous fixtures, fittings and furniture to match. So, you can fall in love with your space every single day.
As one of the UK’s largest independent bathroom stores, we’ve received countless awards; including the National Business Awards UK, the Digital Entrepreneur Awards and being placed on The Sunday Times Fast Track 100.
We hope your new product goes above and beyond your expectations. However, should any problems occur, please:

Important information

  •  Please read these instructions thoroughly and retain for future reference
  • Installation must be carried out in compliance with The Water Fittings Regulations and Scottish Water Byelaws.
  • The system must be flushed prior to installation, else it might clog the filter and the following phenomenon occurs: discharged water volume is small, or temperture cannot be controlled well.
  • Minimum and Maximum working pressure : 0.5 – 5 bar
  • Pressures must be equal for optimum performance
  • Please do not connect hot and cold water supply lines in reverse. This could result in hot water flowing from cold line and cause scalding.
  • The feed-water temperature of water shall not exceed 85°C. Exceeding 85°may cause scalding, the service life of faucets might be shortened, or the faucet might be damaged.
  • After installation, please make sure the faucet is securely mounted and checked for leaks.

Parts / Diagrams

| No| Part Description
---|---|---
1| Shower Arm
2| Wall trim
| No| Part Description
---|---|---
1| Shower Arm
2| Wall trim
| No| Part Description
---|---|---
1| Washer
2| Shower head

Dimensions

better bathrooms ARIMB013 Brushed Brass 355mm Wall Arm -
Dimensions

Tools required

  • Seal tape

Installation

better bathrooms ARIMB013 Brushed Brass 355mm Wall Arm - Dimensions
1| Wall-mounting type(same method for
ceiling-mounting type)
. Put the trim cover(1) onto the wall arm(2).
. Apply an appropriate amount of seal tape on screw thread of wall arm(2), and screw the wall arm(2) in the water supply pipe elbow installed in the wall (not included), and adjust the wall arm(2) so that the bend points directs vertically down.
. Inspect and check if the rubber washer(3) is fitted in the ball-joint of shower head.
. Screw the shower head(4) with wall arm(2) by rotating the shower head and ensure it is fully tightened.
---|---

Troubleshooting

Issues Check
Poor water flow ·Is there  damage  or blockage  with  filter  mesh inside the

ball joint of shower head
· Are the nozzles of the shower head blocked
Water leak| ·Is the shower head fully tightened to the arm
· Have the seals been fitted
· Has sufficient seal tape been used
·Is  there  damage  or  blockage  within  the  filter mesh inside the ball joint of shower head
· Is there damage to the rubber washer in the ball joint of shower head

Maintenance and Cleaning

To maintain the surface of your product, wipe with a clean damp cloth and wipe dry, do not use any abrasive cleaning agents or materials.
If any harsh chemicals come into contact with the surface of the product, rinse and wipe clean immediately.
If the nozzle is blocked and flow distorted, wipe it with soft cloth which is dipped into warm water.
Take care not to damage the nozzles.
If the product is wiped with excessive force, the nozzle might become damaged or deformed, causing distorted flow.

For more information
. visitbetterbathrooms.com
. emailcustomerservices@buyitdirect.co.uk
. call 03303903062
. write to Trident Business Park, Neptune Way, Huddersfield, HD2 1UA
Part of the BuyltDirect Group

Documents / Resources

| better bathrooms ARIMB013 Brushed Brass 355mm Wall Arm [pdf] User Manual
ARIMB013 Brushed Brass 355mm Wall Arm, ARIMB013, Brushed Brass 355mm Wall Arm, Brass 355mm Wall Arm, 355mm Wall Arm, Wall Arm, Arm
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Better Bathrooms User Manuals

Related Manuals