sygonix 2798467 Solar Panel with Radar Sensor Light Instruction Manual

Operating Instructions
Solar Panel with Radar Sensor Light
Item no: 2798467

2798467 Solar Panel with Radar Sensor Light

http://www.conrad.com/downloads

Intended use

The product is a solar panel that connects to a light with an integrated radar activated switch.
The product has an IP44 ingress protection rating. It is splash proof and suitable for outdoor use. Do not submerge in water.
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in short circuits, fires, or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.

Delivery contents

• Solar panel
• Lamp with sensor
• 3x Expansion screws
• 3x Screws
• 3x Dowels
• Operating instructions

Latest product information

Download the latest product information at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.

Description of symbols

The following symbols are on the product/appliance or are used in the text:
The symbol warns of hazards that can lead to personal injury.
The symbol warns of dangerous voltage that can lead to personal injury by electric shock.
This product is constructed according to protection class III.

Safety instructions

Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
5.1 General

• The product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
• If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.
• Maintenance, modifications and repairs must only be completed by a technician or an authorised repair centre.

5.2 Handling

• Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.

5.3 Operating environment

• Do not place the product under any mechanical stress.
• Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.

5.4 Operation

• Consult an expert when in doubt about the operation, safety or connection of the product.
• If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guaranteed if the product:
  – is visibly damaged,
  – is no longer working properly,
  – has been stored for extended periods in poor ambient conditions or
  – has been subjected to any serious transport-related stresses.

5.5 Li-ion battery

• The rechargeable battery is permanently built into the product and cannot be replaced.
• Never damage the rechargeable battery. Damaging the casing of the rechargeable battery might cause an explosion or a fire!
• Never short-circuit the contacts of the rechargeable battery. Do not throw the battery or the product into fire. There is a danger of fire and explosion!
• Charge the rechargeable battery regularly, even if you do are not using the product. Due to the rechargeable battery technology being used, you do not need to discharge the rechargeable battery first.
• When charging, place the product on a surface that is not heat-sensitive. It is normal that a certain amount of heat is generated during charging.

5.6 LED light

• Do not look directly into the LED light!
• Do not look into the beam directly or with optical instruments!

5.7 Installation

• When penetrating the surface e.g. drilling or inserting fasteners, make sure no cables or pipes are damaged.
• Inadvertently penetrating electric cables causes the life-threatening danger of an electric shock!

Setup and operation

Notes:
– The light fixture can be mounted on a wall or ceiling.
– Check the cables are long enough before mounting the products.
– For further information, see section: Technical data [ 4].

fastened.
2| Press the power button on the sensor light to switch it ON (low brightness).
A| Person is outside the sensing area.
B| When a person enters the sensing area the lamp brightness increases.
C| The light will remain bright for approx. 25 seconds after the person has left the sensor area.

Chosing a location

Find a location that exposes the solar module to full sunlight to allow the rechargeable battery to recharge during the day.
Consider the following:

• The solar panel should be exposed to maximum sunlight. Do not set up the product in the shade or under any cover.
• Avoid the direct proximity of other light sources such as yard or streetlights, otherwise the product will not switch on automatically at nightfall.

Wall mount

When penetrating the surface e.g. drilling or inserting fasteners, make sure no cables or pipes are damaged. Inadvertently penetrating electric cables causes the life-threatening danger of an electric shock!

1. Use the product mounting holes as a template to mark holes on the surface.
2. Drill holes on the marked positions.
3. Attach the sensor light using the supplied dowels and screws. Use the expansion screws for the solar panel.
   → Make sure the product is securely mounted before letting go.

Recharge batteries

Important:
To maximize charging efficiency, keep the solar panel(s) clean and free from debris.

• Solar charge the battery under bright sunlight for at least 8 hours:
  – Before first use
  – After prolonged periods without exposure to sunlight e.g. rain.

Troubleshooting

on.

Cleaning and care

Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions.
They damage the housing and can cause the product to malfunction.
– Do not immerse the product in water.

• Keeping the solar panels clean will maximize charging efficiency.
• Clean the product with a fibre-free cloth.

Declaration of Conformity (DOC)

Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this product conforms to the 2014/53/EU directive.

• Click on the following link to read the full text of the EU declaration of conformity: www.conrad.com/downloads

Enter the product item number in the search box. You can then download the EU declaration of conformity in the available languages.

Disposal

This symbol must appear on any electrical and electronic equipment placed on the EU market. This symbol indicates that this device should not be disposed of as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner, must be removed by end users from the WEEE in a non-destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free takeback of waste. Conrad provides the following return options free of charge (more details on our website):

• in our Conrad offices
• at the Conrad collection points
• at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG

End users are responsible for deleting personal data from the WEEE to be disposed of. It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany.

Technical data

14.1 Solar panel
Power ……………………………………… 6 V, 10 W max.
Type………………………………………… Polycrystalline
Ingress protection ……………………… IP44
Cable length …………………………….. 445 cm
Dimensions (L x W x H)……………… 240 x 355 x 15 mm
Weight …………………………………….. 908 g
14.2 Sensor light
Rechargeable battery ………………… 3.7 V/DC, 6000 mAh, 22 Wh Li-ion
Battery recharge time ………………… approx. 4 hrs (optimal conditions)
Battery life………………………………… 8 – 12 hrs
Ingress protection ……………………… IP44
Protection class ………………………… III
LED…………………………………………. 5 pcs SMD, 6 W max.
Colour temperature……………………. 4000 K (neutral white)
Brightness………………………………… max. 250 lm
Lighting mode …………………………… light ON (135 lm), sensor activated brightness
increases (250 lm approx 25 secs)
Sensor …………………………………….. type: radar, angle: 180°, distance: 5 – 8 m
Light sensor thresholds ……………… ON: <20 lux / OFF: >200 lux
Cable length …………………………….. 35 cm
Dimensions (ø x H)……………………. 230 x 37 mm
Weight …………………………………….. 407 g
14.3 Radar
Wireless frequency band ……………. 5.725 – 5.875 GHz
Wireless range …………………………. max. 10 m
Wireless transmission power ……… -4 dBm
14.4 General
Operating conditions………………….. -20 to +40 °C
Storage conditions…………………….. -20 to +40 °C
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.

Copyright by Conrad Electronic SE.
*2798467_V2_0923_dh_mh_en 18014399436601867-2 I3/O2 en

References

• Conrad Electronic » All parts of success
• Conrad Electronic » All parts of success
• Download center

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>