RALPH LAUREN RL1491 Garner Floor Lamp Installation Guide
- June 4, 2024
- ralph lauren
Table of Contents
RL1491 Garner Floor Lamp
Installation Guide
ASSEMBLY INSTRUCTIONS
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect items and contents carefully. If any damage or defect is found, do not install it. Retain all packaging material until installation is complete and approved.
-
Carefully remove all parts from the carton.
-
Thread the rod (B ) onto the nipple (C) by turning in a clockwise direction
until tight. -
Remove finial (A) from the top of the rod (B), attach shade (not included) onto the threaded portion, and secure with a finial (A).
-
Insert the specified light bulbs into sockets.
-
Remove plastic cover (E) from electrical plug (F)
-
Plug the lamp into a wall outlet.
TO ADJUST:
- Loosen the break (D) by turning counter-clockwise direction.
- Adjust rod (B) up or down to desired height.
- Tighten the break (D) by turning clockwise direction.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>