MuxLab 500221 Loudspeaker Dante, ceiling Installation Guide
- June 4, 2024
- MuxLab
Table of Contents
MuxLab 500221 40W Dante Ceiling Speaker PoE Installation Guide
Safety Precautions
To ensure the best performance from the product, please read all instructions carefully before using the device. Save this manual for future reference.
- Follow basic safety precautions to reduce the risk of fire, electrical shock, and injury.
- Do not dismantle the housing or modify the module. It may result in electrical shock or burns.
- Do not open or remove the housing of the device as you may be exposed to dangerous voltage or other hazards.
- To prevent fire or shock hazard, do not expose the unit to rain, moisture and do not install this product near water. Keep the product away from liquids.
- Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on the housing, unplug the module immediately.
- Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
- Using supplies or parts not meeting the product specifications may cause damage, deterioration or malfunction.
- Refer all servicing to qualified service personnel.
- Install the device in a place with adequate ventilation to avoid damage caused by overheat.
- Unplug the power when left unused for a long period of time.
- Information on disposal of devices: do not burn or mix with general household waste, please treat them as normal electrical waste.
Copyright Notice
All contents in this manual are copyrighted, and cannot be cloned, copied, or translated without the express permission of MuxLab Inc. Product specifications and information in this document are for reference only, and the content may be updated from time to time without prior notice.
Introduction
The MuxLab Dante Ceiling Speaker PoE, 40W (500221) is a high-performance full band and easy installation speaker ideal for providing background music and vocal performance in a wide range of applications and installations and is designed with advanced linear sound source technology.
The MuxLab Dante Ceiling Speaker PoE, 40W comes with a 6.5” coaxial 40W loudspeaker driver that has excellent dispersion, wide bandwidth, and smooth frequency response which makes this the ideal choice for today’s overhead commercial and residential applications.
To achieve the distribution of power supply, audio signal transmission, and control functions the Dante Ceiling Speaker PoE, 40W uses only a network cable, making it a very economical option with great energy savings.
This product is compatible with other MuxLab Dante products, including the following models:
- 500220 – Dante Two Column Speakers PoE, 60W
- 500765 – Dante/Quad Channel Audio PoE Gateway
- 500759-TX-Dante – HDMI/Dante over IP PoE Transmitter, UHD-4K
Features
- Supports the Dante protocol
- Built-in power amplifier module
- Precise DSP matching
- Power Supply via PoE
- Mounts easily onto the ceiling
- Free sound calibration software tool available
Package Contents
- One (1) Dante Ceiling Speaker PoE, 40W
- One (1) Speaker hole template
- One (1) Safety Wire Rope for Ceiling Speaker
- One (1) User manual (available via download)
- One (1) calibration software tool (available via download)
Notes: Confirm that the product and accessories are all included. If not, please contact the supplier from which you purchased the unit.
Specifications
Applications
The Dante Ceiling Speaker PoE, 40W are ideal for hotels, conference rooms, shopping center, education, hospitals, retail stores, performing art centers, restaurants, airports, houses of worship, and board rooms.
Typical Application
Sound calibration software tool
The Dante Ceiling Speaker PoE, 40W comes with a calibration software tool, this software tool is useful for all types of users who want to improve the sound of their speakers. The calibration software tool is free and available on the MuxLab website: https://muxlab.com/support?section=software-and- firmware
The graphical interface of the calibration tool is shown below.
Note : Note that to get the maximum power output from your speakers, you must connect them to Ethernet Switches that provide 40W of power output per port, or use 40W (or greater) PoE Injectors.
Troubleshooting
The following table describes some of the symptoms and possible solutions regarding the Dante Ceiling Speaker PoE, 40W.
MuxLab Inc.
2321 Rue Cohen
Montreal, Quebec
Canada H4R 2N7
Tel.: +1 514-905-0588 Fax: +1
514-905-0589
Toll Free (North America): 877 689-5228
URL: www.muxlab.com
E-mail: info@muxlab.com
MuxLab © 2021
94-000967-A/SE-000967-A
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>