GooDee YG600 Dolby Native 1080P Video Projector User Guide
- June 13, 2024
- GOODEE
Table of Contents
GooDee YG600 Dolby Native 1080P Video Projector
Safety Notice
- Please read Manual carefully before you use the projector.
- To ensure stable power supply, please use national standard power cable and power cord with grounding.
- Please use the same power voltage as the projector marked.
- Please do not open the projector, otherwise the supplier will not afford warranty service.
- Do not look directly at the projector lens while the machine is working to avoid damage your eyes.
- To avoid clog of the projector vent, please do not cover with cloth, carpet and other materials.
- This projector does not have waterproof function, please keep it away from rain, moisture and other items containing liquid such as vase, cup, etc.
- To prevent power breakdown, please keep the projector away from rain or water or moisture.
- Turn off and cut off the power supply if do not use this project for a long time.
- Use the originally foam or other unit-shock material to protect projector, if you need transport this projector.
- If you find the projector has problems, please contact with the supplier, do not repair by yourself.
Maintain Indication: 1-year warranty from factory, for more warranty information, please contact with supplier (warranty service is not including the frame, manual, package, and some subjective idea about the video, sound, image aspects).
Interface introduction
- Lens
- Manual focus
- Keystone
- UP
- Left
- Down
- Right
- OK
- Menu
- Signal Source
- Return
- Power switch
- VGA
- HD input slot 1
- HD input slot 2
- 5V-OUT
- USB input slot
- .AV input slot
- Earphone slot
- .MicroSD card slot
- Power switch
- Power input
Remote Control Introduction
Pairing instructions:
- Press volume “+” and “-” at the same time, indicator light blinks for 3 seconds, remote control is pairing.
- If pairing is successful, indicator light continuously flashes 3 times and then extinguishes
- If pairing still failed for 1 minute pairing, exit pairing mode, indicator light extinguishes, follow the steps above to pair again * Remote-control should be close to the projector.
NOTE:
- To avoid power shortage, please do not mixed use the old and new battery.
- To avoid battery leakage corrosion, if do not use remote control for a long time, please take the battery out.
Use manual
- Preparation before light on
- As following picture, connect the power adaptor.
Power on/Power off
To start the projector, press the power button y “-” and press “ ” in the
front of the projector or press the remote control “ ” button.
Boot screen
As the projector start working, after screen display 2 to 5 seconds of boot
screen, then come into the multimedia screen.
Focus & keystone
keystone In sometimes, the images which projector on the wall is a little
twisted as a ladder ,we could take a keystone button” ©”to adjust it. the
keystone technology is the method to get the image normalization by digital or
optical technology.
Solution
Our projector provide optical keystone function, you could turn the keystone
adjust the image.
Image focus
Put the projector vertical to the projector screen or white wall adjust the
keystone “@”, until the clearly enough, then the focus is finished during the
focusing, you cold display video the menu to check the focus adjust.
Solution
Our projector have no level keystone function, and if have this problem, the
reason is your haven’t keep the projector vertical with the projector
screen.and the solution is to adjust the projector’s position, and keep the
projector on the same level.
Projector connection introduce
Connection introduce
Multi-media connection
Insert the USB/MicroSD card into the accordingly slot. (refer to picture
below)
Choose multi-media signal source.
Choose the content which you neec display: Video, Music, Photo Text.
Choose the file which you want to display, press ” ” display or stop.
AV Video Equipment Connect
Use 3 in 1 cable video convert cable, connect projector AV slot, the connect
method like the picture, as connected, choose the signal source video.
HD Equipment Connect
HD slot could connect to computer and all the device with HD slot. As
connected, choose the source HD
Support files: 576₽, 480₽, 720P, 1080₽, 640480, 800600, 1024768, 12801024, 1280720, 1440900, 19201080, 1366768, 1280800, 1440960, 16001200, 16801050
Our projector support HD slot and MHL cable. Use them to connect your mobile
and tablet to projector.
Please consult your mobile’s factory or agency for this function.
This function may be affected by device and cable.
3.5mm Audio Device Connect
Could connect 3.5mm earphone and speaker equipment.
Notice: Due to Dolby copyright, this projector not support Dolby related decode.
Lifting way
Remove the foot pads you will see the screw holes.
Adjust foot pads
Lift up the projector and press the “PUSH” button to adjust the high-low of
foot pads.
Dust removal from Anti-dust Mesh
In order to keep the air circulating, please remove the air inlet regularly
to clean the dust. Note, for your safety, pls shut the power off before
operation.
Remove both sides of the slot to disassemble it.
Menu guides
Menu setting
Image menu Remote control use guide: press ” ” key, then the main menu come
out. Press ” ” key, choose to come into the image submenu. Press ” ” key,
choose the program which you want to adjust. Then press “OK” key come into
setting.
In the image, you could set the following models, such as image mode (standard ,soft, user ,dynamic), color temperature (cold hot, user standard), zoom mode (auto, 4:3, 16:9, point-to-point, panoramic, zoom1, zoom2, just scan), de- noise (close, low, middle, high, tacitly approve).
Audio Sub-menu Press” ” key, and then get the main menu. Press ” key, choose audio submenu. Press ” ” key, choose the items which you want to adjust. Then press “OK” key come into setting.
In the audio, you could set the balance (-50- +50), auto volume (open, off), surround (close, surround, SRS), and balance (120Hz, 500Hz, 1.5Hz, 5kHz, 10kHz).
Set time Sub-menu
Press “ key on the remote control, and get the main menu, then press “ ” key,
choose time submenu, press ” ” key, choose the items which you want to adjust,
then press “OK” key come into set.
In the setting, you can set the language in menu language set, back to factory setting, and upgrade software.
Set Sub-menu
Press “ ” key on the remote control, then press ” ” key to set submenu. Press
“ key, choose the program which need adjust, then press “OK” key come into
setting. You can set the language, back to factory setting, and upgrade
software.
Display Menu Use Guide
You can control the content by the display menu.
Echnology Features
Basic parameters
Projector distance & size
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>