GooDee BL98 HD Video Projector User Manual
- June 13, 2024
- GOODEE
Table of Contents
GooDee BL98 HD Video Projector
Preparation Before Use
- Connect the power cable and press the power switch on the projector.
- Press the power button on either the remote control or projector control panel and wait approximately three seconds.
Basic Operations
Correcting Projection Image
If the projected image appears in the shape of a trapezoid, the trapezoidal correction knob on the projector can be toggled and rotated until the image returns to a normal rectangular shape.
Focusing Projection Image
Note:
- The lens will not be able to focus if it becomes dirty or condensation forms on it. Please remove any dirt or condensation.
- The lens will not be able to focus if the projection distance is outside the normal range. Check the projection distance if you are having trouble getting the picture to focus.
Function Adjustment
Switching the projection mode
Press the [FLIP] button on the remote control or open [MENU] – [PICTURE] – [Flip] to select the [Front], [Rear], [Front/Celling], or [Rear/Celling] projection modes.
Image zoom function
Press the [ZOOM] button on the remote control or open [MENU] – [PICTURE] – [Reduce Display Size] to adjust the image size and zoom from 0-25%.
Adjusting brightness, color, and contrast
Open [MENU] – [PICTURE] – [Picture Mode] to adjust the brightness, color, contrast, etc. as needed.
Restoring Factory Settings
This function is used to restore all parameters to their original manufactured state：Open [MENU] – [SETTINGS] – [Restore Factory Default] and press the [OK] button to enter the “Restore Factory Default” menu.
Connection Settings
Computer Connection Settings
Connect the computer to the projector with the HDMI cable, click the [SOURCE] button, and select the corresponding [HDMI1] / [HDMI2] input. After confirming a normal connection between the computer and projector, perform the following operations： (Notice: A Mini DisplayPort to HDMI adapter is needed to connect an Apple computer to the projector.)
- Connect to your computer and set the display resolution and frequency to 1920×1080 and 60 Hz, respectively.
- The computer’s image output mode should be checked when the projector’s input channel is set to HDMI/VGA. Press [F1 – F12] while holding down the FN key to choose the duplicate image mode.
Common key commands are as follows： (FN+F5) for Toshiba, Sharp, and Acer; (FN+ F7) for IBM, Hitachi, and BenQ; (FN+ F4) for HP and NEC; (FN+ F3) for Lenovo, Founder, Samsung, and Panasonic; (FN+ F8) for Apple and Dell; (FN+ F9) for Asus.
DVD Connection Settings
If using a three-in-one AV cable, the corresponding L/R audio and video channels must be properly inserted to connect DVD/VCD players, cameras, and other HD devices to the projector. The [AV] input should be selected using the [SOURCE] button.
USB/SD Connection Settings
Please insert the USB flash drive or SD card into the correct position on the function interface, click the [SOURCE] button, and select the corresponding [USB] / [SD] input. Press the play button to begin playing the selected file.
Phone Connection Settings
Phones cannot be connected directly to the projector with a USB cable. An HDMI screen mirror device must be used instead.
- Connecting an iPhone/iPad： A Lightning to HDMI adapter is needed. Once connected, the iPhone/iPad will display a prompt asking whether the device is to be trusted. Once the trust button has been tapped, the screen mirror image can be opened and projection can begin.
- Connecting an Android phone: A Micro USB/Type C to HDMI adapter is needed. Once connected, a QR code for downloading EZCast software will be displayed on the screen. Projection from the phone can begin once the software has been installed.
PRECAUTIONS
-
Ventilation :
Ensure proper air circulation around the projector to prevent it from overheating. Avoid blocking the vents and air intakes to maintain adequate airflow. -
Temperature :
Use the projector within suitable room temperature conditions and shield it from extreme temperatures and direct sunlight, which could impact its performance and longevity. -
Cleaning :
Gently clean the projector’s lens and exterior using a soft, non-abrasive cloth. Refrain from using harsh cleaners or rough materials that might harm the lens or casing. -
Transportation :
When relocating the projector, use its original packaging or a protective case to safeguard it against any potential damage during transit. Avoid any rough handling or sudden movements. -
Placement :
Position the projector on a steady and level surface to ensure the projected image remains properly aligned. Avoid placing it on uneven or unstable surfaces that might induce vibrations. -
Power :
Connect the projector to an appropriate power source as indicated in the user manual. Utilize the provided power cable and adapter to prevent electrical complications. -
Connections :
When linking external devices, confirm their compatibility and make sure the connections to the projector’s input ports are secure. Refrain from forcing connectors into the ports to avoid causing harm. -
Lens Maintenance :
If necessary, cleanse the lens using a suitable lens cleaning solution and a gentle lens cleaning cloth. Handle the lens with care to prevent any potential scratching. -
Remote Control :
Handle the remote control delicately, avoiding drops or exposure to liquids that could potentially damage its internal components. -
Power Down :
Always power off the projector and disconnect it from the power source when it’s not in use. This practice conserves energy and mitigates the risk of electrical hazards. -
Firmware Updates :
Regularly check the manufacturer’s website for any available firmware updates and adhere to the provided instructions to keep the projector’s software current. -
Ceiling Installation :
If the projector is mounted on the ceiling, ensure proper installation following the manufacturer’s specified guidelines. Use suitable mounting hardware and brackets for a secure setup. -
Routine Checks :
Routinely inspect the projector for signs of wear, damage, or any operational issues. Promptly address any concerns to prevent further complications. -
Safety Around Children and Pets :
Keep the projector out of reach of children and pets to avoid potential accidents or damage. -
Warranty Awareness :
Familiarize yourself with the warranty terms outlined by the manufacturer. Refrain from actions that could void the warranty, such as unauthorized repairs or alterations.
FREQUENTLY ASKED QUESTIONS
What is the GooDee BL98 HD Video Projector?
The GooDee BL98 is a high-definition video projector designed for home entertainment and multimedia presentations.
What features does the BL98 HD Video Projector offer?
The BL98 typically offers high-resolution projection, multiple connectivity options, built-in speakers, keystone correction, and more.
What is the resolution of the BL98 HD Video Projector?
The BL98 usually offers HD resolution, often at 1080p or higher, for sharp and detailed image quality.
What is the brightness rating of the BL98 HD Video Projector?
The brightness rating can vary, but the BL98 is often rated at several thousand lumens for vibrant and clear images.
What are the connectivity options on the BL98 projector?
The BL98 typically includes HDMI, USB, VGA, AV, and audio output ports for connecting various devices.
Is the BL98 HD Video Projector suitable for home theater setups?
Yes, the BL98 is often used in home theater setups for watching movies and TV shows on a larger screen.
Can the BL98 projector be used for gaming?
Yes, the BL98 can be used for gaming due to its high resolution and quick response time.
What is keystone correction on the BL98 HD Video Projector?
Keystone correction helps adjust the projected image to eliminate distortion when the projector is not perfectly aligned with the screen.
Does the BL98 projector support 3D content?
Some models of the BL98 might support 3D content playback when used with compatible sources and glasses.
Can I connect streaming devices to the BL98 HD Video Projector?
Yes, you can connect streaming devices like Roku, Amazon Fire Stick, or Apple TV to the BL98 for streaming content.
Is the BL98 HD Video Projector suitable for outdoor use?
The BL98 can be used outdoors, but it's important to protect it from moisture and weather conditions.
Does the BL98 projector have a built-in speaker?
Yes, the BL98 usually includes built-in speakers for audio playback, but external speakers can also be connected.
Can I mount the BL98 HD Video Projector on the ceiling?
Some models of the BL98 might be compatible with ceiling mounts, but it's recommended to check the specifications.
What is the lamp life of the BL98 HD Video Projector?
The lamp life can vary, but the BL98 typically offers several thousand hours of lamp usage before replacement is needed.
Does the BL98 projector have a remote control?
Yes, the BL98 often includes a remote control for convenient operation from a distance.
VIDEO – PRODUCT OVERVIEW
DOWNLOAD THE PDF LINK:GooDee BL98 HD Video Projector User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>