GooDee YG600-Movin LED Projector User Manual

GooDee YG600-Movin LED Projector User Manual

Safety Instructions

Read all instructions before you use this device. Do not make any changes or create settings that are not described in his manual. If physical injury. loss of data or damage is caused by failure of follow instructions, the warranty does not apply.

Setup

1. To reduce the risk of fire or electric shock, do not expose the device fo rain or moisture. Objects filed with liquids, such as vases, should not be placed on this device.
2. Do not place this device on soft surfaces such as tablecloths or carpets, ofherwise ihe device could be a fire hazard.
3. Do not place this device in areas susceptiole fo excessive dust and dirt or near any appliance generating a strong magnetic field.
4. 0 prevent overheating, do not block or clog fne ventilation openings.
5. Never place this device in a confined space. Leave enough space around this device for ventilation.
6. Protect this device from overexposure 1o direct sunlight, heat, large temperature fluctuations and mosture. Avoid exireme temperatures. The suitable operations and storage temperature for this device and ifs accessories s (O°F to 95°F).
7. When this device is running for long period of fime, the surface may become hot. Shut it down immediately and unplug the charger. Resume operation after this device has cooled down.
8. Always handle this device with care. Avoid touching the lens. Do not allow children o handle the device without supervision.
9. Never place heavy or sharp objects on this device.
10. To avoid electric shock, do not disassemble.
11. Use attachments or accessories specified by the manufacturer only.
12. Avoid extreme vibrations as they may damage the infernal components.

The following safety instructions ensure the long service life of the projector of avoid fire or electric shock. Please read carefully and pay attention to the following warnings.

• Don’t install the projector in sites with improper ventilation.
  

• Don’t install the projector in hot or humid sites.

• Don’t cover the projector ventilation holes with any material.

• Don’t install the projector in dust or smoke sides.

• Don’t install the projector near the temperature or smoke transducer. It may cause a sensor failure.

• Don’t install the projector in sites with direct blowing of warm or cool codification wind.

• Please do not look into the lens when the projector is working, otherwise it may hurt your eyes
  

• Please keep the projector away from water or any other liquid as it is not waterproof.

Notice

1. Please use the power cord with caution fo avoid unduly bending. Damaged power cord may cause electric shock
2. Please use the projector with caution fo av damage the internal components. dropping or shocking, which may
3. Please use he same power vallage as marked on the projector.
4. Please use fhe projector in a dark room for best results
5. Please do not disassemble the projector by yourself, otherwise the warranty wil be void.
6. Please fum off and unplug from the power supply if nof using the projector for o long time.

FCC Statement
Radiation Exposure Statement.
This device complies with part 15 of the FCC rules. Operation is subject of the following two conditions: (1)7 This device may not cause harmful interference, and(2)this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority of operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

NOTE: This equipment has been tested and found fo comply with the limits for a  Class B digital device, pursuant to part 15 of the FCC Rules These limits are designed fo provide reasonable protection against harmful inferference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, f not installed and used in accordance with the instructions, may cause harmful inferference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmiul interference fo radio or felevision reception, which can be determined by fumning the equipment off and on, the user s encouraged to try fo correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between equipment and receiver.
• Connect the equipment info on outlet on a circuit different from that o which the receiveris connected.
• Consult the dealer or an experienced radio/TV technician for help important announcement Important.

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environs ment. This equipment should be installed and operated with minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Package List

• Projector x 1

• Power Cable x1

• HDMI Cablex1

• Remote Control x1 (Batteries ore not includeq)

• 3 ™ 1 Video Cable x1

• Lens Cover x
  

• Adjustable Foot x

• Projector User Manual & Quick Start Guide

• Portable Bag

Tips:

1. Blurry Image
   • First, correct the keystone to a rectangle.
   • Second, rotate the focus button fo obtain the best clarity.
   • Best Projection Distance: 4.26-16.4 feet.
2. Mounting Hole
   Adopting a single mounting hole danseuse design, the projector is compatible with the standard camera tripod and 1/4 inch screw projector tripod stand. Meanwhile, you can rotate 360° the screw fo meet different angle needs.

Overview

1. Keystone
2. Manual Focus
3. Up
4. Left
5. Right
6. Down
7. Ok
8. Menu
9. Signal Source
10. Return
11. Power Button

Remote Control

Attention

1. Do not submerge the remote control in water.
2. Do not put the remote control near fire or in wet or hot places.
3. Do not use old and new batteries together in the remote control.
4. Please fake the batteries out if not using the remote control for along fine to avoid battery leakage.
5. Please point the remote control forward the IR receiver.
6. Please use the remote control within 6 meters distance and 30 degree angle.
7. 1f his part is missing, please contact our customer service email address in the Quick start guide or contact the seller you bought this device

Getting Started

1. Plug the power cord of the projector.
   

2. Press power button of fum on the projector.
   

3. Connect projector to HDMI port support device.
   

4. Select the input source.

5. Adjust here accordingly,
   

6. Adjust keystone and focus ring of get e best image performance.
   

7. Press the power button twice to tum off e projector
   

Tips:

1. If the image is displayed as a trapezoid shape, you can adjust it with the keystone correction function by truing the keystone ring. This should normalize the display image.
2. Make sure the projector is horizontal fo the projector screen and adjust the focus by timing the focus ring.

Connection

Projector interface connection

Connect mulfiple devices and applications.

USB connection
a. Insert the USB flash/storage hard drive into the USB port and choose USB as source from the menu. (The USB icon on the main interface will turn blue after the USB is inserted. If the USB icon on the interface does not display blue, you need to insert it again or check whether the USB disk is faulty.)

Support local decoding 4K 1384021601 (H.265) *USB-2 port is a 5V power supply port for charging.

Supported multimedia formats
b Choose the content which you need to play.

Video Play

| MPEG1| .DATE.MPG\.MPEG| \
MPEG2| .MPG| \
MPEG4| .AVID.MP4| DIVX,XVID
RM RMVB| | RV8, RV9, RV10
H264| .VKV\.FOV| H.264
HEVC/H.265| .MKV .MP4| \
MJPEG| .AVI| \
DIVX| .DIVX\.AVI| MPEG, DIVX, H264
FLV| .FLV| H264

Picture Pla’/

| JPEG| .JPG| \
BMP| .g  p| \
PNG| .PNG| \
Audio Play| MP3| .MP3| \
M4A| .MP4| \

Office Suife

| Word| .DOCX.DOCX| \
Excel| .XSLT.XSLX| \
PowerPoint| .PPTX| \

HDMI connection
a. Use the HDMI port to connect computers and HDMI compatible b Choose the content which you need to play. devices. Once connected, select the HDMI signal source.

Tip:

1. Mini Display Port fo HDMI Cable , Thunderbolt fo HDMI Adapter are needed 10 be compatiole with Apple iMac, MacBook, Surface, ThinkPad.
2. Supported resolufion: 576P, 480P, 720P, 1080P, 640480, B00X600, 1024×768, 1280×1024, 1280×720, 1440×900, 1366×768, 1920×1080, 1280xB00, 1440×960, 680×1050.

AV connection
a. Use an AV Signal cable fo connect the DVD with projector, once connected, select the AV source.

Tips:

1. Support NTSC/PAL.

Bluetooth connection
a. Select “Bluetooth Setiings”. Setting up your Bluetooth.

b. Press “OK” key to turn Bluetooth on.
c. Select “Scan for devices” and press “OK’ key fo scan nearby Bluetooth speakers.

d. Select your Bluetooth speaker from the lst, press “OK” key to connect (pair).

3.5mm audio connection
a. Use @ 3.5mm audio jack fo connect headphones and speaker equipment.

“This projector supports Dolby sound.

WiFi wireless screen mirroring
a. For iPhone/iPad/iPod fouch (iOS system)
Streaming with your Wi (wireless connection] Step 1. Tum on the projector and select “Setfings” . Setting up your WiFi.

Step 2. Go fo the “i0S Cast”.

Step 3. Connect youriPhone/iPad fo the same WiFi. Open “Screen Mirroring” on your device and click “YG400 Plus-XXXX” fo connect.

b. Wireless connection o Android system
To use this function, your Android device must support the Multi-screen/ Wireless display.
Step 1. Tum on the projector and select “Mira cast”.

Step 2. Go to the Android device “Seeings and select your WLAN.
Step 3. Activate Firescreen function in your Android device and search for the projector, select “YG400 Plus-XXXX” and click fo connect. Your Android device display will be projected fo the wall/screen naffer a successful connection.

Please node:

1. Make sure your mobile device is within 3 ft distance from the projector when using wireless connection.
2. Some mobile devices do nod support screen mirroring.

Example:
Connect to a SAMSUNG $21u Mobile Phone.
Step 1. Tum on the projector and select “Miscast” screen mirroring as the input source.
Step 2. Go fo the phone “Settings” and open your WiFi

Step 3. Open the ‘Smart View” on your device, select ” YG600 Plus-XXXX and click to connect.

c. Wireless connection to Windows
To use this funcion, your Windows device must support the Multi-screen/ Wireless display.
Step 1. Tum on the projector and select “Miracast” screen miroring as the. input source.

Step 2. Tum on the computer, enter “WIN+P” and choose “connect fo the wireless display”
Step 3. Click “YG400 Plus-XXXX” to connect.

Menu setfings

a. Projection Seffings

Note: If the picture is distorted, you can adjust it in Keystone Advanced fo make the picture become arectangle.

Projector Installation

Place your projector on the ceiling

1. When installing the projector on the ceiling, please purchase a projector bracket recommended by an installation professional and follow the instructions supplied with the bracket.
2. Before installing the projector on the ceiling, please check if the mounfing siructure can support the weight of the projector and the bracket. Ifin doubt, please consult the advice of an installation.
   

*Fixed Hanger Screw Hole Type: M44.
NOTE:** Projector bracket and screw (s) are not included.

Technology Features

a. Parameters

b. Projection Distance and Screen Size
Recommended Projection Distance: 4.3-16.4 Feet

NOTE: Because the optical device has about 3% error, the above data is for reference only, please install the projector according of the actual measurement.

Questions&Answers

“Problems sted below might occur during the operation of your projector. Please refer to the possible factors which might cause the issue to do froubleshooting. Any questions during use, please feel free fo contact our customer service team.

Please waich the video on how to connect the phone and computer from QUICK START GUIDE

ACTIVATE YOUR 12-MONTH WARRANTY & CUSTOMER SERVICE

by choosing one of the following two options:
Option 1: Please visit our website and register:
https://www.top-goodee.com/
Option 2: Please scan the below code and contact us:

Also, you can scan the above code for more operation videos.

[email protected]
Qe 001-844-610-2995
@ Mon. – Fri. 9:00 AM-5:00 PM (PT)

FCC warning statements:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>