Yesair YES-1000 Air Purifier User Guide
- June 13, 2024
- Yesair
Table of Contents
Yesair YES-1000 Air Purifier
CUSTOMER CARE
Our care team is genuinely devoted to our customers. We will continue to grow
our team of happy, helpful individuals dedicated to making a difference. We
are committed to providing you with the customer care you deserve, and we’re
always here to answer any technical questions you have about our products.
We’re social, are you?
Go to the www.YesAirPro.com home page, where you
will find links to our official social pages so we can keep in touch with
news, discounts, and new products for healthy living
IMPORTANT SAFETY INFORMATION
Placement of the Unit
Keep a safe distance from surround- ing objects. The air inlet should be at
least 8 inches from a wall orobstruction on all sides. This allows for
sufficient airflow coming into the unit. While In Use Immediately stop the air
purifier if you experience unusual sounds, strange smells, high temperatures,
orthe fans making an unusual noise Do not sit on, lean on or tilt the air
purifier.
Installation
After you unwrap the plastic from the filters and reinstall them, ensure the filter cover is secured and locked. The filter cover must be closed correctly for an airtight seal.
Moving
- Unplug the power cord from the electrical socket before trying to move the unit.
- Do not excessively twist, pinch or bend the power cord.
- Do not drag or pull the cord when unplugging.
- Do not use the provided power cord with any other devices.
- Make sure there is some slack, so the cord doesn’t get stretched.
Warnings
- Use only the supplied power cord with this product. Using any other power supply may pose a fire risk.
- Do not stick any objects into the air outlet.
- Do not place objects on top of the unit to restrict airflow coming from the machine.
- This equipment should be inspected frequently, and collected dirt should be removed regularly to prevent excessive accumulation.
SYSTEM IDENTIFICATION
FCCR RADIATION EXPOSURE STATEMENT CAUTION
To maintain compliance with the FCC’s RF exposure guidelines, place the
product at least 20cm from nearby persons.
WARNING : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTES : This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
To maintain compliance with the RF exposure guidelines, place the product at least 20cm from nearby persons.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following mesures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
DISPLAY PANEL FEATURES
ON/OFF
After the power is connected, the machine is in standby mode, and the light
for the ON/OFF button will illuminate red. The unit will default to AUTO mode
when turned on. Standby power is < 2 watts. Therefore, to completely shut down
the machine, you must disconnect the power cable from the outlet source.
AUTO AUTO Mode with Smart Detection
When AUTO mode is selected, air quality sensors detect the air quality in the
room and adjust the fan speeds accordingly. Four built-in sensors sample the
air in the room for fine particles, odors, temperature, and humidity.
PM2.5 Index
What does the number on the display panel mean?
The PM2.5 number is a measurement of fine particles in the air. When the air
purifier detects these particles, it displays a reading. It will then change
colors, and the fan speed will adjust automatically to filter them out when
set to AUTO mode
What do the colors mean?
The air purifier displays four colors – Blue, Green, Orange, and Red,
depending on the level of pollution detected. The PM2.5 scale is programmed to
U.S. standards for PM2.5 particle pollution. However, the scale we use may
differ from other products in the marketplace and from country to country
sincethere is no universal scale for PM2.5 particle pollution. with higher
levels of pollutants, and the fan’s speed will go as high as Turbo (Speed 4)
to clear out particles and smoke. Once the contaminants are cleared out, the
air purifier settles back into a lower speed.
Speeds
Press “Speed” on the control panel to switch the fan speed to manual mode.
There are four manual speeds: Speed 1, Speed 2, Speed 3, and Speed 4 (Turbo).
If using the remote, press the desired fan speed level or select AUTO mode and
have the unit operate automatically using sensors to purify the room.
PM2.5 Scale
- Excellent (0-12) Blue
- Good (13-35) Green
- Fair (36-55) Orange
- Poor (>55) Red
Fine particles are continuously detected by the laser particle sensor installed in your air purifier. If the number of particles exceeds the excellent range of 12, the air purifier color bars will change color from Blue to Green, and the fan’s speed will increase when using AUTO mode. Orange and Red color bars are shown
Ultra-Quiet Sleep Mode
The fan operates at the lowest speed in sleep mode, and its lights go out with the Sleep button partially illuminated. To exit Sleep mode, push any buttons (except the ON/OFF standby button) to switch the mode of operation. If the Sleep button is pressed while in Sleep mode, it will resume operation at Speed 2.
ROOM SIZE COVERAGE
Model : YES -1000
Air changes per hour are the number of times the air is replaced in an area with filtered air. The more times you change the air in a room, the cleaner the air is kept. This is especially important for those dealing with allergies, asthma, and environmental sensitivities. Use these numbers as a guide for how much area you can expect the unit to cover at a maximum for the given air changes.
- Two air changes per hour (ACH) up to 1020 square feet
- Four air changes per hour (ACH) up to 510 square feet
WARRANTY REGISTRATION
Peace of mind comes with every YesAir™ air purifier. Your new air purifier
comes with a 1-Year warranty even if you don’t register it. We guarantee that
vour YesAir™ YES-1000 is free from defects in materials and workmanship and
manufactured and delivered in compliance with local laws. On the rare occasion
that you have an issue with your unit, we will make the necessary repairs and
send it back to you. If we cannot repair it, we will replace the unit.
Register your product and receive a Free 3-Year Warranty exclusively through
YesAirPro.com. This offer is available to residential
customers in the United States.
Free Lifetime Technical Support is available to all customers. If you require assistance with your product, call us toll-free at 1-888-918-8885. Locate the serial number on the back of your product and register online within 30 days of receiving your product.
Register online at: YesAir Pro.com/Warranty
The serial number is in the following format starting with the letter “P.”
Ex: PXXXX-XXXXX-XXXXX
WHAT’S IN THE BOX
- YesAir™ (YES-1000) Air Purifier
- True Medical-Grade HEPA Filter
- Granular Activated Carbon Filter
- AC Power Cord
- Remote w/ Battery
- User’s Guide
- Warranty Instructions
FOLLOW THE STEPS BELOW TO SET UP YOUR UNIT BE SURE TO REMOVE FILTER PACKAGING BEFORE YOU PLUG IN YOUR UNIT.
- STEP 1 Remove the air purifier from the shipping and retail box. STEP 2 Turn the air purifier upside down on a padded or smooth surface, such as carpet or hardwood.
- STEP 2 Follow the instructions on the filter cover to remove it.
- STEP 4 Next, remove the filters from the unit. Take off any plastic protective covering from the filters and reinstall them into the machine.
- STEP 5 Put the filter cover back and make sure it has an airtight seal.
- STEP 6 Carefully flip the air purifier to the upright position and place it in the desired location.
- STEP 7 Use the ac power cable to plug into the air purifier and the electrical outlet.
- STEP 8 & Finally, press the red power button on the control panel to start breathing pure air.
FILTER LIFE
The air purifier uses internal algorithms and a timer to monitor the status of
the filters. After approximately 4380 hours or up to 1-year of use at 12 hours
per day, you’ll need to replace the filters.
CLEANING & MAINTENANCE
The YES-1000 air purifier requires virtually no maintenance under normal operating conditions. Just replace the filters after 6-12 months of use and continue enjoying pure air every day. It’s good practice to check the filters every few months of use. If extensive particle collection is abundant on the pre-filter, remove the debris with a vacuum hose.
FILTER RESET
When the air quality light bars flash red continuously, the filters need to be
replaced -after replacing the filters with new ones, power back on the unit.
Next, press and hold the “Sleep” button on the control panel for 3 seconds.
The memory is now cleared, and your filter replacement reminder is reset.
SAFETY FEATURES
Child Lock
Preventing young children from changing the functions of the air purifier is
easier than ever. Just press and hold the Timer button on the display panel
for 3 seconds, anda red light will appear. The current functions are now
locked in place. To unlock, press the Timer button again for 3 seconds.
Safety Shut-Off When Tilted
The unit will power off automatically if the machine is tilted 90 degrees or
more during operation. This ensuresthe safety of the user and product. Once
safely in the upright position, the red standby button will illuminate,
allowing you to power on the unit.
SMART LIFE – SMART LIVING APP CONTROL (WIFI)
The Smart Life – Smart Living APP is free for download directly from the Apple
Store or Google Play site. Alternatively, you can find the link to the APP on
our homepage by visiting www.YesAirPro.com.
USING THE REMOTE
Wireless APP control at your fingertips. Connect your YesAir™ (YES-1000) via WiFi and access all its features. For help connecting to the APP, visit the help section of our website or contact customer care.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>