SIGNATURE HARDWARE 948380 Round Closed Front Toilet Seat Instruction Manual
- June 13, 2024
- Signature Hardware
Table of Contents
SIGNATURE HARDWARE 948380 Round Closed Front Toilet Seat
- Product Information: Traditional Slow Close Toilet Seat
- SKU: 948380, 948381, 948382
The Traditional Slow Close Toilet Seat is a high-quality toilet seat designed for easy installation and comfortable use. It features a slow close mechanism that prevents slamming and ensures quiet closing. The toilet seat is durable and made to withstand regular use.
Product Usage Instructions
Before You Begin
- We recommend consulting a professional if you are unfamiliar with installing plumbing fixtures. Signature Hardware accepts no liability for any damage or injury during installation.
- Observe all local plumbing and building codes.
- Unpack and inspect the product for shipping damage. If any damage is found, contact our Customer Relations team via live chat at www.signaturehardware.com or by emailing support@signaturehardware.com.
Getting Started
Ensure that you have gathered all the required materials that are needed
for the installation.
Installation Steps
- Carefully remove the old seat by unscrewing any bolts or hinges holding it in place.
- Place the new toilet seat on the toilet bowl, aligning it properly.
- Insert the hinge bolts through the holes in the rear of the toilet bowl.
- Make sure that the hinge bolts are inserted through or connected to the seat hinge.
- Place the nuts on the hinge bolts and tighten them until they are firmly seated. Be careful not to overtighten, as it could crack the toilet bowl.
If you have any additional questions or need further assistance, please visit our Help Center at www.signaturehardware.com for product and warranty information. You can also contact us through live chat or by emailing support@signaturehardware.com.
- Revision Date: 02/22/2023
- Codes: SHTSSC100, SHTSSC200, SHTSSC202
- Contact Number: 1.855.715.1800
BEFORE YOU BEGIN
We recommend consulting a professional if you are unfamiliar with installing
plumbing fixtures. Signature Hardware accepts no liability for any damage to
the faucet, plumbing, sink, or countertop, or for personal injury during
installation. Observe all local plumbing and building codes. Unpack and
inspect the product for shipping damage. If any damage is found, contact our
Customer Relations team via live chat at www.signaturehard-
ware.com or by emailing support
@signaturehard-ware.com.
GETTING STARTED
Ensure that you have gathered all the required materials that are needed for
the installation.
TOOLS AND MATERIALS
INSTALLATION
- Carefully remove the old seat.
- Place a new toilet seat on the toilet bowl.
- Make sure that the hinge bolts are inserted through or connected to the seat hinge.
- Insert hinge bolts through the holes in the rear of the toilet bowl.
- Place the nuts on the hinge bolts and tighten until the nut is firmly seated.
Note: Make sure not to overtighten the nuts as this could crack the toilet bowl.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>