ONEX CAR DVD MP4 VCD MP3 CD AM FM Stereo Sys Multi Media Player User Manual

ONEX CAR DVD MP4 VCD MP3 CD AM FM Stereo Sys Multi Media Player

Product Information

CAR DVD/MP4/VCD/MP3/CD/AM/FM STEREO SYS MULTI MEDIA PLAYER

Welcome! Thank you for purchasing our digital media player. To operate the unit correctly, please read the user manual carefully before using the unit. Keep these instructions and retain this booklet for future reference.

Notes on installation

Do not block vents or radiator panels. Blocking them will cause heat to build up inside and may result in fire. After the completion of the installation and begin to play the unit (including replacing the battery), please press the RESET button on the front panel with pointed objects (such as ball-point pen) to set the unit to factory settings.

Precautions

This unit can play the following discs only.

Note: The unit is compatible with DVD.VCD1.0/2.0/3.0 DVCD.CD-RW. CD-R.PICTURE- CD version Disc. The manual conforms to DVD VCD MP3 and CD. If no DVD VCD or MP3 on some models, you should ignore them. While enjoying DVD VCD MP3 and CD, the display will automatically identify the discs and indicate the corresponding words.

Do not attempt to modify the unit, modifying the unit may cause damage.

Stop the vehicle before carrying out any operation that could interfere with your driving.

Do not use your CDs with paste residue or ink attached.

Do not use CDs with labels or stickers attached.

Do not work in extreme high or low temperature inside the vehicle is between +55°C and -20°C before turning your unit on.

To enjoy optimum sound and images while playing, handle the discs as follows:

• Handle the disc by its edge to keep the disc clean, and do not touch the surface.
• Clean the discs with a soft, dry cloth. Wipe each disc from the center out.

Wiring Diagram

STANDARD CONNECT

Location of the Control

1. Power On/Off
2. Volume Control Dial
3. Mode Button/End call
4. Band Selector
5. DISC Slot
6. LCD Display
7. Remote Control Receptor
8. USB In
9. Reset Button
10. AUX In
11. Number Buttons for radio/DISC/USB/SD
12. Random
13. Repeat
14. Number Buttons for radio/DISC/USB/SD
15. Disc play/pause
16. Seek down (Tracks down)
17. Seek up (Tracks up)
18. Clock Button/Answer call
19. MUTE On/off
20. ST(L/R) Audio pilot
21. Eject Button

Basic Operation

Display Screen: Vol/Bass/Tre/Bal(L-R)/Fad(F-R)/LOUD/EQ Selector

LCD Display: DVD/VCD/MP3/CD for DVD/VCD/MP3/CD Title Chapter/Track for Time

Radio/Disc/Usb/Sd/Aux

Initial System Start-up: Operating the unit for the first time or after replacing the car battery, you must reset the unit. Press 9 (RST) button with a pointed object (such as a ballpoint pen) to set the unit to factory setting.

Welcome!
Thank you for purchasing our digital media player. To operate the unit cor- rectly, please read the user manual carefully before using the unit. Keep these instructions and retain this booklet for future reference.

Notes on installation

• The unit is designed for 12V DC, negative ground operation system only. Before installing the unit, make sure your vehicle is connec-ted to DC 12V negative ground electrical system.

• The negative battery terminal must be disconnected before making connections, which can reduce damaging the unit due to short circuit.

• Be sure to connect the colour co-ded leads correctly according to the diagram. Incorrect connections may cause the unit to malfunction or damage the vehicle’s electrical system.

• Be sure to connect the speaker (-) leads to the speaker ( – ) terminal. Never connect the left and right channel speaker cables each other or to the vehicle body.

• Do not block vents or radiator pa-nels. Blocking them will cause heat to build up inside and may
  result in fire.

• After the completion of the installa-tion and begin to play the unit (in-cluding replacing the battery), ple-ase press the RESET button on the front panel with pointed objects (such as ball-point pen) to set the unit to factory saettings.

Precautions

This unit can play the following discs only.

Type of disc| Label on the disc| Recorded material| Size of disc
---|---|---|---
DVD| | Sound and moving Pictures| 12cm

VCD

| | Sound and moving Pictures| 12cm

MP3/MP4

|

| Sound and moving Pictures| 12cm
CD| | Sound only| 12cm
Note: 1. The unit is compatible with DVD.VCD1. 0/ 2.0/3.0 DVCD.CD-RW. CD-R .PICTURE-CD version Disc.

2. The manual conforms to DVD VCD MP3 and CD If no DVD VCD or MP3 on some models,you should ignore them. While enjoying DVD VCD MP3 and CD. the display will automatically identify the discs and indicate the corresponding words.

• Do not attempt to modify the unit, modifying the unit may cause da-mage.

• Stop the vehicle before carrying out any operation that could interfere with your driving.

• Do not work in extreme high or low temperature inside the vehicle is between +550C and -200C before turning your unit on .

• To enjoy optimum sound and ima-ges while playing , handle the discs as follows:

  • Handle the disc by its edge to keep the disc clean, and do not touch the surface.

  • Do not use your CDs with paste residue or ink atta-ched .

  • Do not use CDs with labels or stickers attached . (Shown as picture)

  • Clean the discs with soft, dry cloth .Wipe each disc from the centre out. (Shown as picture)

Wiring Diagram

STANDARD CONNECT

Location of the Control

1. Power On/Off
2. Volume Control Dial
3.  Mode Button/End call
4. Band Selector
5. DISC Slot
6. LCD Display
7. Remote Control Receptor
8. USB In
9. Reset Button
10.  AUX In
11. Number Buttons for radio /DISC/USB/SD
12. Random
13. Repeat
14. Number Buttons for radio /DISC/USB/SD
15. Disc play/pause
16. Seek down (Tracks down )
17. Seek up (Tracks up)
18. Clock Button/Answer call
19. MUTE On/off
20. ST(L/R) Audio pilot
21. Eject Button

Basic Operation

Display Screen

Initial System Start-up

Operating the unit for the first time or after replacing the car battery, you must reset the unit. Press 9 (RST) but-ton with a pointed object (such as a ballpoint pen ) to set the unit to factory setting.
Note : If some errors occur in the LCD display , you can also press R E S E T button to resume to normal. And it will erase the clock setting and some memorised functions.

Turning the Unit On/Off

Power On/Off
Press 1 (PWR) button to turn on the unit, and press it again to turn off the unit.

Vol/Bass/Tre/Bal(L-R)/ Fad(F-R)/LOUD/EQ Selector
For Volume Control 2, rotate VOL dial clockwise to increase the sound level, and rotate it anticlock wise to decrease the sound level.
Repeatedly press 3 (SEL) button to select the desired mode in the following order:

Repeat Playing
During DVD mode, Press (RPT) to repe-at the current track being played. Press it again to repeat playing all the tracks. The third press cancel the repeating function.

18 Clock Button
Press clock button 18 on, then press seek up for hour 0~23 and press seek down for munutes 0~59.
Press 18 again to exit.

Basic Operation

• Turning ST/AUDIO
  Press 20 (L/R) button to increase the ST for FM stereo/Mono Disc L/R

• AUX IN

  • 10 Aux In for audio input L and R
  • 15 Disc play/pause

• Mode Selector
  Press 3 ( M O D E )button to select radio mode or DISC/USB play back mode and AUX in .

• Senor

  • Receptor for the card remote commander (for remote control version only).
  • 4 Band Selector radio to fm/am,dvd to pal/ntsc/auto sys
  • 17 SEEK UP/SKIP BACK
  • Tune radio station or skip back;
    19 MUTE On/off

• USB IN

  • 8 USB input can auto play;
  • 16 SEEK DOWN
  • Tune radio station or skip forward.
  • 14 Number Buttons 1~6 for radio, Disc/usb 1=play/pause, 2=stop, 3=repeat, 4=enter, 5=fast rewind 6=fast forward

• EJECT BUTTON

  • Press EJECT button 21 to eject the disc, OPEN will appear on display EJECT button only for DISC mode .
  • 5 DISC Slot
  • 6 LCD Display

Radio Operation

Note: This window is used for the unit with remote con-trol function. Without this function,you should ignore the operation contents about remote control function.

Band Selector

Press 4 (BAND) button repeatedly to select bands in the following order:

Radio seek UP/DN
Press 17/16 (UP/DN) button to se-lect radio seek UP/DN.
Tuning /Fast Rewind/Forward
Tuning radio mode, continuously press button to au-tomatically search a station downward or upward respectively until it finds a station. If pressed for more than 3 se-conds, the radio will hold
button for manual search a station downward or upward respectively;

Number Buttons
1~6 Number buttons for radio only 3. (1~6) Number buttons can help you store your favorite station by pressing any one of the number buttons. You can follow the steps as below:
Press and hold any number button until appears in the LCD display when receiving a station. The is Station will already be stored in the correspon- ding number button. (See the picture) You can store up to 18 FM stations,up to 6 AM stations.
Note: Working at 3 band fm for 1 band am. Represents

AS/PS(auto seek search tuning)
By pressing shortly, the radio sear-ches for each preset station when field strength level is holding at than the threshold level of stop level the radio is holding at that preset number for 5sec with releasing mute and then searches again by pressing longer than 1sec, and then 6strongest stations are preset to the correspon-ding preset number. When as operation is finished, the radio executes the pre-set scan.

DISC/USB/BT DVD.VCD.MP4.MP3.CD Operation

Bluetooth MODE
Setting Up Bluetooth:

Turn on BT setting on phone. Select CAR BT under devices. BT will auto con- nect when selected.
Stream music:

• Select mode button on stereo 3
• Press the mode button until the dis-play shows BT

USB MODE
Plug USB with music on into USB con-nection to play 8.

DVD, VCD, MP3, CD Operation

To listen to (or to watch) a DVD, VCD, CD, MP3, insert a CD (with labelled side up ) into the CD SLOT 5. The mecha-nism will automatically switch on. If a CD is loaded, press 3 MODE button for Disc to start playing.

To isten to ( or to watch) MP3, CD-RW, insert a CD into the CD SLOT 5 ,the mechanism will automatically switch on. The menu on the disc will display to select playing pictures or music.

A. Main menu operation:
Press 11 key on remote control to choose your desired contents and it will display on TV screen. Press ENTER key or press to confirm. If you want change the contents you se-lected press (return) key to re-select.

B. Secondary menu operation:
If “ “mark shows on screen after you selection, it‘s means contain next secondry menu, press (ENTER) key in succession to select desired contents.

Location of the Remote Control

Replacing the Battery

When the battery becomes weak, the range of the card remote commander becomes shorter.
Replace the battery with two Alkaine AAA batteries. Make sure of the battery polarity.

Main key

1. Power Button
   Press 1 (Power) button to turn
   On/Off the power.

2. Band
   During radio mode, press 2 (BAND) to switch receiving Band: FM1.2.3–AM

3. Mode
   Press 3 (MODE) button to FM&AM—DVD–AUX(Option)

4. MUTE
   M U T E button to turn On/Off the mute;

5. Volume Increasing/Decreasing
   Press ( VOL+ or VOL- ) button to increase or decrease the volume level respectively 0–40; BASS +/-10,tr-ber +/-10, balance+/-10, fader +/-10, loud on/off, EQ flat/class/pop/rock/disp off/ and disc/usb/sd number 0-500 track ;

Remote Control Operation DVD(DVD/VCD/MP3/CD)KEY ONLY

6. Number buttons
   The nuber (0~9,10+) buttons During the playing mode ,you can sele ct any track directly by using (6) num-ber buttom (0~9,10+) for example, if you need the fi fteenth track, you can fi rst press button 10+ and then press button 5, the corresponding track 15, will be played.
   Note: vcd-PBC mode play ,number button is not functional

7. On-Screen Display/GOTO
   Press 7 button. The Video shows: A) TITLE:

   • B) CHAPTER:
   • C) TIME:

8. TITLE KEY
   DVD, playing mode, Press 8 tracks (TITLE) key to show all tracks title on TV screen. Then press ( 0 ~ 1 0 + ) key or press 6 key to choose your desired track number and press 12 (ENTER) key or 14 to start.

Note:

1. No title display in MP3, CD mode
2. For choose a desired language to press title key.

9. FAST FORWARD/REWIND
   During the playing mode, press 9 button to fast rewind or fast forward for you to reach your desired quickly.

10. **SYSTEM SETUP MENU

**

  * A) You will first see the LANGUAGE menu page when the setup menu is brought up, asillustrated above.

  * B) You will first see the picture as shown above after you enter the DISPLAY setup menu page.

  * C) You will first see the picture as shown above after you enter the AUDIO setup menu page.

  * D) You will first see the picture as shown above after you enter the LOCK setup menu page. The page is used to set the PARENTAL control.  

Note:when locked password, But disremember it,must to select LOAD DEFAULT > SELECT enter.

  * E) You will first see the picture as shown above after you enter the OTHER setting page. The page is used to set the control.

11. Selecting direction
    **UP/DOWN/LEFT/RIGHT

**

12. ENTER
    The UP/DOWN/LEFT/RIGHT and ENTER are driver selecton you want to playback

13. MENU/APS
    When you insert a DVD disc into the DVD player and start to play it:
    The unit will automatically start the playback from the beginning of the disc, and then the MENU will be brou-ght up. Press Up/Down/Left/Right to move the highlight in the MENU. Press Enter on the selected option When VCD mode control PCB ON/OFF Radio AS/PS (auto seek search tuning)

14. Pause/Play Button
    Press 14 button to pause the playback of CD, MP3, VCD.
    DVD.USB,SD Press it again to return to normal playback mode.

15. STOP Button 15
    Stop the current disc playback. Press STOP to enter the resume stop mode. Press PLAY under the resume stop mode to resume the playback from the location where you stopped the playba-ck previously. Press STOP two times consecutively to enter the clear stop mode. Under the clear stop mode, if PLAY is pressed, the disc will resume the playback from the beginning of the disc.

16. OSD
    O S D O n / O f f (on screen display)

17. LOUD
    Loud on/off,

18. EQ
    EQ to flat ,class,pop,rock disp off

19. TRACK
    Press button, you can se-lect your desired portion downward or upward respectively
    19 Radio SEEK /Track up/down
    

20. SUBTITLE
    Press SUBTITLE oce to bring up the subtitle information shown on the top right corner of the screen.

21. ZOOM
    The ZOOM feature allows you to mag-nify a certain area on the images recor-ded on the DVD, VCD and other image discs.

22. PAL/NTSC/AUTOMATIC
    3 selections of TV color signal system are provided: NTSC, PAL or Automatic mode.

23. SLOW
    Slow / REV Slow:
    Press Slow / REV Slow during the playback mode to execute the Forward/Reverse Slow function. When the unit is under the FWD/REV Slow mode, the picture of the screen will move on slowly, and the sounds will be halted. With each consecutive press of Slow / REV Slow, the playback speed de-creases. There are 5 speed levels in Forward/Reverse Slow: X1/32, X1/16, X1/8, X1/4, X1/2.
    Press PLAY to resume the normal playback. Please note that the Reverse slow function is only valid in DVD disc playback.

24. L/R(AUDIO)
    Press AUDIO one time to bring up the audio information shown on the top right corner of the screen. You will see the language selected and the digit au-dio output information.

25. REPEAT(1/ALL REPEAT)
    1/ALL Repeat: Press 1/ALL Repeat if user wants to repeat the whole disc or a specific track/chapter of the disc.

Installation

Parts List (The number in the list are keyed to those in the instructions)

Specification

Note: Due to continuous product improvement, specifications and design are subject to change without notice.

Simple Troubleshooting Guide

proper value if necessary.
Some errors occur in the LCD or no func- tion when pressing the button.| • Press the R E S E T button.
Unable to receive stations.| •   Check and make sure whether the anten- na is inserted or the antenna is properly connected.
Poor effect on receiving a station.| •    Antenna may not be the proper length. Make sure the antenna is fully extended and not broken. If broken, replace the an- tenna with a new one.

•   The broadcasting signal is too weak.

•    The antenna is poorly grounded, check and make sure the antenna is properly grounded at its mounting location.

A CD cannot be loaded.| •   A CD is loaded in the mechanism.
The stereo indicator is flashing.| •   Tune in the frequency accurately.

•   The broadcasting signal is too weak.

No picture.| •  The Video line from main unit to the TV is not connected properly.
The picture noise appears.| •     Improper setting of the colour system. Set the colour system to “PAL” or “NTSC” according to the connected television.

•   The CD is dirty or damaged.

Note: If any of the problem persist after check list had been made, consult your nearest service dealer. Never attempt to disassemble your unit by yourself.

Warranty & Product Inquiries

1 year warranty from date of purchase. For warranty evaluation, the purchaser must return the product to the dealer.
Manufactured by Team Noble Limited – +86 755 85278182
Australian distributor ONEX – (03) 8354 550 www.onex.com.au

References

• Home - OneX Products

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>