EZTATTOO WIRELESS P3 Pro Turbo Wireless Pen Machine Instruction Manual
- June 17, 2024
- EZTATTOO WIRELESS
Table of Contents
EZTATTOO WIRELESS P3 Pro Turbo Wireless Pen Machine
Specifications:
- Battery Capacity: 1600 mAh
- Recharging Time: 2 hrs
- Powerpack Working Time: 4.5 hrs Approx
- Motor Material: EZ Customized Swiss Motor
- Stroken Length: 3.0mm to 5.0mm
- Operating Voltage: 5-12V DC
- Weight: 6.7oz (189g) with power pack
Product Usage Instructions
BASIC OPERATION
- Power ON/ OFF: Press and Hold the power button for two seconds to turn P3 Pro Turbo On or Off. The device has an Auto Power Off function if not used for 5 mins.
- Power START/ STOP: Click power button to start or stop the device.
- Adjust Voltage: Press +/- to adjust voltage in 0.1V increments. Hold +/- for quick adjustments.
- Start/ Stop Built-in Timer: Press button to activate the machine, timer starts counting. Maximum recording time is 999 minutes.
- Push Mode: Press and hold buttons simultaneously to activate push mode where initial voltage output is 10V for 1 second.
STROKE ADJUSTMENT
Locate components labeled A and B on your EZ Tattoo Machine for stroke
adjustment.
FAQ:
- Q: Does the device support fast charging?
A: No, the device does not support fast charging. Please use the provided cable for charging.
OVERVIEW
Warning:
This device does not support fast charging. Please use the provided cable for charging.
SPECIFICATIONS
-
Battery Capacity
-
Recharging Time
- Power pack Working Time
- Unlocked In Future
BASIC OPERATION
Power ON/ OFF
Press and Hold the power button **for two seconds to turn P3 Pro Turbo On or
Off.
Note:** P3 Pro Turbo with a function (Auto Power Off) to turn off the power
automatically if the machine has not been used for 5 mins.
Power START/ STOP
Click power button to power the P3 Pro Turbo Start or Stop.
Adjust Voltage
- Press or to adjust in 0.1V increments.
- Press and Hold or to quickly adjust the voltage in 0.1V increments.
Start/ Stop Built-in Timer
- Press button ****to active your machine ON, the timing mode start.
Note: timer mode record in minutes, the maximum recording time is 999
minutes.
The time is counting only when machine is running. The timer will reset the
count when the P3 Pro Turbo is being restarted.
Push Mode
Press and button at the same time, Screen solid, the machine active the push
mode.
Note: In push mode the initial voltage output is 10V lasts for 1 second
and then returns to normal voltage after.
SPECIFICATIONS
| Motor | EZ Customized Swiss Motor |
|---|---|
| Material | Aircraft Aluminum |
| Stroken Length | 3.0mm to 5.0mm |
| Operating Voltage | 5- 12V DC |
| Five Options Adjustable Stroke | 3.0, 3.5, 4.0, 4.5, 5.0mm |
| Rpm | 10000rpm ± 10% |
| Switch Frequency | 60 – 170Hz |
| Needle Protrusion | 0 – 4.5 mm |
| Dimensions(ΦX L) | 34 mm x 128 mm |
| Weight | 6.7oz(189g) with power pack |
INCLUEDS
- P3 Pro Turbo
- User Guide
- Battery
- Type-C Charging Cable
- Hex Wrench
COMPATIBLE WIRELESS FOOTSWITCH
INSTRUCTION
Use The Wireless Footswitch To Start/Pause The Device.
POWER ON/OFF:
Slide The Switch To Turn On/Off.
PAIRING:
Turn On The Footswitch. The Flashing Red And Blue Lights Indicate That The
Footswitch Is Ready For Pairing. Ensure That The Device’s Bluetooth Mode Is
En-abled. It Will Automatically Connect To Your Foot switch. Once Connected,
The Flashing Blue Lights On The Footswitch Will Indicate A Successful
Connection. After The Initial Pairing, P3 Pro Turbo Will Automatically Connect
To The Footswitch.
WORKING MODE:
There Are Two Distinct Working Modes Of The Footswitch:
Maintain Mode:
To Activate Maintain Mode, Tap and Hold Both and .When The On The OLED Display
Is Flashing, It Indicates That Maintain Mode Is Active.In This Mode, Tap And
Hold The Footswitch To Keep The Device Running. Release The Footswitch To
Pause The Device.
Momentary Mode:
To Activate Maintain Mode, Tap and Hold Both and .The On The OLED Display Will
Remain Solid To Indicate The Activation Of Momentary Mode. In This Mode, A
Single Tap Will Start Or Pause The Device.
OVERVIEW
STROKE ADJUSTMENT
Locate the adjustment components on your EZ Tattoo Machine. Find marked sections on the picture labeled “A” and another labeled “B.” Using the provided hex wrench, carefully unscrew the fastening at mark
- Ensure that you have a firm grip on the machine to prevent any accidental movement.
Once mark A is loosened, you can now adjust the stroke length according to the line marked on point B. This adjustment allows you to customize the machine’s performance based on your preferences. After making the desired stroke adjustment, securely tighten the fastening at mark A using the hex wrench. Ensure it is tightened adequately to prevent any instability during tattooing.
WARRANTY INFORMATION
| MOTOR: | One Year Warranty |
|---|---|
| BATTERY PACK: | Six Months Warranty |
| SPARE PARTS: | Three Months Warranty |
COVERAGE
This Warranty Covers The P3 Pro Turbo Wireless Pen Machine Purchased From Our
Online Store Or Authorized Distributors Worldwide. The Warranty Period Starts
From The Date Of Purchase.
WHAT IS NOT COVERED
- Damage To The Product Caused By Human Factors.
- Product Damage Resulting From External Electrical Failures Or Accidents.
BATTERY PROTECTION
- The Battery Is Equipped With Circuitry To Protect It From Extreme Temperatures, Over-discharge, And Over-charge.
- It Will Automatically Turn Off If Overloaded Or Exposed To High Temperatures During Use, Such As In Situations With Excessive Strain.
- The Shutdown Occurs Temporarily When The Operating Temperature Exceeds 158°f (70°c) And Resumes When It Returns To 152°f (67°c).
WARRANTY CARD
- Product Name:
- Date of Purchase:
- Where Purchased:
- Address:
- Email:
- Customer Acknowledgement:
My Signature Below Acknowledges That I Have Read, Fully Understand, And Accept This Limited Warranty Agreement.
- SIGNATURE:
- DATE:
- Send This Copy To:
EZTATTOO – AFTER-SALES DEPARTMENT
- Email: [email protected]
- @EZTATTOO OFFICIAL
- Website: www.eztattoosupply.com
- Designed and Manufactured in China by EZ