legrand LE12747AB EMDX with Netatmo Connected Load Shedder Instruction Manual
- June 13, 2024
- Legrand
Table of Contents
legrand LE12747AB EMDX with Netatmo Connected Load Shedder
Product Information:
- Product Name: Smart Load Shedder
- Model Number: 4 121 72 – 1 991 20
- Composition: Cable length: 800mm, Smart load shedder
- Compatibility: Load shedding function compatible with 83 mm LE12747AB Socket outlet, Cable outlet, Mobile socket outlet,Connected contactor, Connected dry contact
- Maximum Current: Imax=80A AC
- Power Supply: 100-240V~ 50 / 60Hz
- Compliance: CE Directive Compliant with the Low voltage directive (LVD) 2014/35/UE
- Manufacturer: Legrand
- Manufacturer’s Website: www.legrand.fr/reference/412172
Product Usage Instructions
- Installation Requirements:
- Install a Gateway module
- Install a Connected Starter Pack with Netatmo
- Alternatively, install any kind of gateway with Netatmo
- Note: The installation of at least one of these products is necessary for the smart load shedder to operate.
- Connectivity:
- Ensure the smart load shedder is compatible with the following devices: 83 mm LE12747AB Socket outlet, Cable outlet, Mobile socket outlet, Connected contactor, Connected dry contact.
- Make sure the cable length is 800mm.
- Connect the smart load shedder to the power supply with a voltage of 100-240V~ and frequency of 50 / 60Hz.
- Usage:
- Pay attention to the direction of the current when connecting the load shedder.
- Measure the coil accuracy to ensure proper functionality.
- Activate the shedding function as needed, ensuring it complies with safety regulations.
For more information and detailed compliance documents, refer to the manufacturer’s website: www.legrandoc.com
INSTALLATION
Requires the installation of a:
Load shedding function compatible with :
Socket outlet, cable outlet, connected contactors and dry contacts from « … with Netatmo » range
N.B. The installation of at least one of these products is necessary to the operating of the smart load shedder.
Composition
Pay attention to the direction of the current
Imperative security precaution
The instructions for installation and use must be strictly observed in order to avoid the risk of electric shock or fire.
Preparation, connection
Wiring
A circuit breaker with rated current C2 to C16 is necessary depending on wire section used for supplying the smart load shedder.
If the product is not wired on the phase it is tracking consumption from, the product will flash in orange.
Add the Smart load shedder in a connected installation
In order to restart all connected products at the same time.
**: After wiring the installation, refit the front plate so that no active
live part is accessible.
Finalize the installation in the Legrand Home + Control app
Download the Home + Control App and follow the instructions for adding the connected product in your setup.
You also have the option of controlling your installation via a voice assistant. and can customize your scenarios via the Home + Control App.
Reset a Smart load shedder to remove it from a connected installation
Press the configuration button of the Smart load shedder (> 5 seconds) until
the configuration indicator lights up in fixed red.
It is no longer associated with the Gateway present in the installation.
www.legrand.fr/reference/412172
LEGRAND – Pro and Consumer Service – BP 30076
87002 LIMOGES CEDEX FRANCE • www.legrand.com
UE SIMPLIFIED DECLARATION OF CONFORMITY
The undersigned,Legrand declares that the radio equipment listed on this
instruction sheet are compliant to the directive 2014/53/UE.
The full text of the UE declaration of conformity is available at the
following website:
www.legrandoc.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>