ektor EV-RAZOR-CORE-24M Core Razor Surface Mount Exit Light Installation Guide
- June 4, 2024
- ektor
Table of Contents
INSTALLATION LEAFLET
EV-RAZOR-CORE-24M Core Razor Surface Mount Exit Light
EV-RAZOR-CORE-24M
12121
Remove the product from the box and inspect it for any damage. If you believe
the product to be damaged or otherwise unsound, DO NOT install the product.
Please pack it back into its box and return it to the place of purchase for a
replacement. If the product is satisfactory, proceed with the installation.
Prior to installation, components may require disassembly prior to fitment.
- Separate the top from the unit using a flat-bladed screwdriver to release locking tabs (as shown).
- Make a 63 x 335 mm cut-out and insert the unit into the ceiling space. Using a Philips head screwdriver, turn the lock mechanism clockwise to lock and secure the unit in place.
- Attach the diffuser to the recessed frame by sliding it to the left. Attach the cover plate by pressing until a click is heard.
WARNING
The luminaire is connected to an unswitched active during normal operating
conditions. When disconnected from the mains supply, the luminaire is powered
by a LiFePO, battery-operated inverter. Due to this, care should be taken when
replacing the battery.
SAFETY WARNINGS
- This product must only be installed by a licensed electrician.
- Before commencing installation turn off and isolate the electrical supply.
- Risk of accidental contact with live parts. Do not energize with the product open or disassembled.
- The main supply and battery circuit are separated by basic insulation.
- The only user serviceable/replaceable part is the battery pack.
- Do not attempt to service other parts of the fitting as this will void the warranty.
- After installation allows the battery to charge for 24 hours before carrying out discharge testing.
- As the installer, it is your responsibility to ensure you comply with all relevant building and safety codes for example the BCA and AS3000.
- Once the battery can no longer meet the required rated duration it must be replaced.
- This luminaire is intended only for mounting in locations where the plug and socket are protected from unauthorized disconnection.
- For indoor use only.
- If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by the manufacturer or his service agent.
COMPLIANCE STANDARDS AS/NZS 60598.2.22 AS/NZS 2293.3 IEC 60598-2-22 IEC 55015 CISPR 15
ORDER INFORMATION
Order code
EV-RAZOR-CORE-24M| SKU
12121| Description
Slim blade Core Recessed Exit Light 24M
---|---|---
DIMENSIONS (MM)
SPECIFICATIONS
Voltage
Frequency
Class
Max. ambient temp.
IP rating
Maintained
Power Consumption| 230V~
50 Hz
2
0 to 40°C
IP20
Max. 2.5W
Avg. 2.3W| Mounting type
Viewing Distance
Wiring
Classification
Projected light
source life| Recessed
24M
Flex and Plug
C0:E6.3 C90:E12.5
20Y/00M| Duration
Battery spec
Battery type
Battery supply current
Charging time
Charger type| 90/120 min
3.2V 1500mAh
life,
175mA
<20 hours
Multi-state
---|---|---|---|---|---
REPLACING THE BATTERY
Access the battery by removing the product cover. Disconnect and remove the battery. Replace the battery as was previously installed. Allow a minimum of 24 hours of charging time before carrying out any discharge tests as per the requirements In AS/NZS 2293.
ACCESSORIES AND SPARE PARTS
| SKU | Description |
|---|---|
| 13972 | LiFePO4, Battery , 3.2V 1500mAh, 1 cell |
| 2987 | 24M decal pack to suit Razor Core |
TEST SWITCH
| Action | Function |
|---|---|
| Hold | Run in emergency mode |
BATTERY LIFE
- Battery minimum life is 4 years, and can only be used under emergency mode.
- Once the battery can no longer meet the required rated duration it must be replaced.
- To maintain the economic life of this product it is required that the battery be discharged and recharged at least once every 6 months. The battery life can be reduced if the battery is not discharged.
INDICATORS
CHARGE LED – GREEN
| State | Meaning |
|---|---|
| On | Battery charging |
| Off | Battery failed / disconnected |
STATUS LED – AMBER
| State | Meaning |
|---|---|
| Off | Normal operation |
The leaflet is subject to change without notice
See separate leaflet for Warranty
EV-RAZOR-CORE-24M 912121
LAST UPDATED: 18.11.20 V1.0
EV-RAZOR-CORE-24M-B
12122
Remove the product from the box and inspect it for any damage. If you believe
the product to be damaged or otherwise unsound, DO NOT install the
product. Please pack it back into its box and return it to the place of
purchase for a replacement. If the product is satisfactory, proceed with the
installation. Prior to installation, components may require disassembly prior
to fitment.
- Separate the top from the unit using a flat-bladed screwdriver to release locking tabs (as shown).
- Make a 63 x 335 mm cut-out and insert unit into the ceiling space. Using a Philips head screwdriver, turn the lock mechanism clockwise to l o c k secure the unit in place.
- Attach the diffuser to the recessed frame by sliding it to the left. Attach the cover plate by pressing until a click is heard.
WARNING
The luminaire is connected to an unswitched active during normal operating
conditions. When disconnected from the mains supply, the luminaire is powered
by a LiFePO, battery-operated inverter. Due to this, care should be taken when
replacing the battery.
SAFETY WARNINGS
- This product must only be installed by a licensed electrician.
- Before commencing installation turn off and isolate the electrical supply.
- Risk of accidental contact with live parts. Do not energize with the product open or disassembled.
- The main supply and battery circuit are separated by basic insulation.
- The only user serviceable/replaceable part is the battery pack.
- Do not attempt to service other parts of the fitting as this will void the warranty.
- After installation allows the battery to charge for 24 hours before carrying out discharge testing.
- As the installer, it is your responsibility to ensure you comply with all relevant building and safety codes for example the BCA and AS3000.
- Once the battery can no longer meet the required rated duration it must be replaced.
- This luminaire is intended only for mounting in locations where the plug and socket are protected from unauthorized disconnection.
- For indoor use only.
- If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by the manufacturer or his service agent.
ORDER INFORMATION
Order code
EV-RAZOR-CORE-24M-B| SKU
12122| Description
Slim blade Core recessed Exit light 24M – Black
---|---|---
DIMENSIONS (MM)
SPECIFICATIONS
Voltage
Frequency
Class
Max. ambient temp.
Maintained
Power Consumption| 230V~
50 Hz
2
0 to 40°C
Max. 2.5W
Avg. 2.3W| IP rating
Mounting type
Viewing Distance
Wiring
Projected light
source life| IP20
Recessed
24M
F l e x and Plug
20Y/00M| Duration
Battery spec
Battery type
Battery supply current
Charging time
Charger type| 90/120 min
3.2V 1500mAh
life,
175mA
<20 hours
Multi-state
---|---|---|---|---|---
REPLACING THE BATTERY
Access the battery by removing the product cover. Disconnect and remove the
battery. Replace the battery as was previously installed. Allow a minimum of
24 hours of charging time before carrying out any discharge tests as per the
requirements in AS/NZS 2293.
ACCESSORIES AND SPARE PARTS
SKU
13972
02988| Description
LiFePO, Battery, 3.2V 1500mAh, 1 cell
24M decal pack to suit Razor Core black
---|---
TEST SWITCH
Action
Hold| Function
Run in emergency mode
---|---
BATTERY LIFE
- Battery minimum life is 4 years, and can only be used under emergency mode.
- Once the battery can no longer meet the required rated duration it must be replaced.
- To maintain the economic life of this product it is required that the battery be discharged and recharged at least once every 6 months. The battery life can be reduced if the battery is not discharged.
INDICATORS
CHARGE LED – GREEN
State
On
Off| Meaning
Battery charging
Battery failed / disconnected
---|---
STATUS LED – AMBER
State
Off| Meaning
Normal operation
---|---
The leaflet is subject to change without notice
See separate leaflet for Warranty
EV-RAZOR-CORE-24M-B 12122
LAST UPDATED: 14.01.21 V1.0
Documents / Resources
|
ektor EV-RAZOR-CORE-24M Core Razor Surface Mount Exit
Light
[pdf] Installation Guide
EV-RAZOR-CORE-24M Core Razor Surface Mount Exit Light, EV-RAZOR-CORE-24M, Core
Razor Surface Mount Exit Light, Mount Exit Light, Exit Light, Light
---|---