ELECOM M-XT2UR Wired Trackball Mouse User Manual

Model: M-XT2UR, XT2UR
Wired Trackball Mouse
Manual

Names and functions of each part

1. Left button

2. Right button

3. Tilt wheel/ pointer speed indicator light

4. Back” button
   You can perform the “Back” operation in a web browser.

5. Forward” button
   You can perform the “Forward” operation in a web browser.

6. Pointer speed reduction switch
   The pointer movement speed decreases when this switch is pressed during operation.

7. Trackball

8. Pointer speed selector Sliding the selector up and down switches the resolution (pointer speed) between LOW and HIGH.
   The current resolution will be indicated by the blinking pointer speed indicator light.
   Blinks once: 750 dpi
   Blinks twice: 1500 dpi

9. USB connector (male)

10. Ball removal hole

11. Optical sensor (under the ball)

Mouse Assistant
Win https://www.elecom.co.jp/r/132.html
Mac https://www.elecom.co.jp/r/133.html
Download “ELECOM Mouse Assistant” from the ELECOM website to use its button assignment and high-speed scrolling functions.

Using the trackball mouse

1. Start the PC.

2. Start the PC, and then wait for it to be ready to perform operations. Insert the USB connector of the product into a USB port on the PC.
   • Be sure to sufficiently check the connector orientation and the insertion location.
   •  If you feel a strong resistance when inserting the USB connector, check that the shape and orientation of the connector is correct. Using excessive force may damage the connector and cause injury.
   •  Do not directly touch the terminal area of the USB connector.

3. The driver will be automatically installed, and you will then be able to use the trackball.

Cleaning the trackball

1. Push out the ball from behind with your finger or a pen.
2. Remove dust off the areas where the three red support balls contact the trackball using a cotton swab.

Take care not to damage the optical sensor when cleaning the area.

Specifications

Supported OS| Windows® 10, Windows® 8.1, Windows® RT8.1, Windows® 7,
Windows Vista®, Macintosh OS X 10.10
(Update for each new version of the OS or the installation of a service pack might be required.)
---|---
Resolution| 750/1500 dpi (switchable)
Interface| USB
Dimensions (W × D × H)| Approx. 95 × 125 × 48 mm
Cable length| 1.5 m
Operating temperature/humidity| 5°C to 40°C/90%RH or less (without condensation)
Storage temperature/humidity| -10°C to 60°C/90%RH or less (without condensation)

Names and functions of each part

1. Left button

2. Right button

3. Tilt wheel/ pointer speed indicator light

4. Back” button
   You can perform the “Back” operation in a web browser.

5. Forward” button
   You can perform the “Forward” operation in a web browser.

6. Pointer speed reduction switch
   The pointer movement speed decreases when this switch is pressed during operation.

7. Trackball

8. Pointer speed selector Sliding the selector up and down switches the resolution (pointer speed) between LOW and HIGH.
   The current resolution will be indicated by the blinking pointer speed indicator light.
   Blinks once: 750 dpi
   Blinks twice: 1500 dpi

9. USB connector (male)

10. Ball removal hole

11. Optical sensor (under the ball)

Mouse Assistant
Win https://www.elecom.co.jp/r/132.html
Mac https://www.elecom.co.jp/r/133.html
Download “ELECOM Mouse Assistant” from the ELECOM website to use its button assignment and high-speed scrolling functions.

Using the trackball mouse

1. Start the PC.

2. Start the PC, and then wait for it to be ready to perform operations. Insert the USB connector of the product into a USB port on the PC.
   • Be sure to sufficiently check the connector orientation and the insertion location.
   •  If you feel a strong resistance when inserting the USB connector, check that the shape and orientation of the connector is correct. Using excessive force may damage the connector and cause injury.
   •  Do not directly touch the terminal area of the USB connector.

3. The driver will be automatically installed, and you will then be able to use the trackball.

Cleaning the trackball

1. Push out the ball from behind with your finger or a pen.
2. Remove dust off the areas where the three red support balls contact the trackball using a cotton swab.

Take care not to damage the optical sensor when cleaning the area.

Specifications

Supported OS| Windows® 10, Windows® 8.1, Windows® RT8.1, Windows® 7,
Windows Vista®, Macintosh OS X 10.10
(Update for each new version of the OS or the installation of a service pack might be required.)
---|---
Resolution| 750/1500 dpi (switchable)
Interface| USB
Dimensions (W × D × H)| Approx. 95 × 125 × 48 mm
Cable length| 1.5 m
Operating temperature/humidity| 5°C to 40°C/90%RH or less (without condensation)
Storage temperature/humidity| -10°C to 60°C/90%RH or less (without condensation)

Safety Precautions

Prohibited action
Mandatory action
Situation that needs attention
WARNING
If a foreign object (water, metal chip, etc.) enters the product, immediately stop using the product, remove the product from the PC. If you continue to use the product under these conditions, it may cause a fire or electric shock.
If the product is behaving abnormally, such as by generating heat, smoke, or a strange smell, immediately stop using the product, shut down the PC, and then sufficiently check whether the product is generating heat while being careful to avoid being burned. Then, remove the product from the PC. After that, contact the retailer from whom you purchased the product. Continuing to use the product under these conditions may cause a fire or electric shock.
Do not drop the product or otherwise subject it to impacts. If this product is damaged, immediately stop using it, remove the product from the PC. After that, contact the retailer from whom you purchased the product. Continuing to use the product while it is damaged may cause a fire or electric shock.
Do not attempt to disassemble, modify or repair this product by yourself, as this may cause a fire, electric shock or product damage.
Do not put this product in fire, as the product may burst, resulting in a fire or injury.
Do not insert or remove the connector with wet hands. Also, do not make alternations to or forcefully bend the connector. Doing so may cause a fire or electric shock.
CAUTION
Do not place this product in any of the following environments:

• In a car exposed to sunlight, a place exposed to direct sunlight, or a place that becomes hot (around a heater, etc.)
• In a moist place or a place where condensation may occur
• In an uneven place or a place exposed to vibration
• In a place where a magnetic field is generated (near a magnet, etc.)
• In a dusty place

This product does not have a waterproof structure.
Use and store this product in a place where the product body will not be splashed with water or other liquid.
Rain, water mist, juice, coffee, steam or sweat may also cause product damage.
Only use this product with PCs and video game systems.
Do not use this product with any device that may significantly be affected in the case of this product malfunctioning.
If this product is not going to be used for one month or longer, remove it from the PC.
When you no longer need to use this product, be sure to dispose of them in accordance with the local ordinances and laws of your area.
Cleaning the Product
If the product body becomes dirty, wipe it with a soft, dry cloth.
Use of a volatile liquid (paint thinner, benzene, alcohol, etc.) may affect the material quality and color of the product.

Limitation of Liability

• In no event will ELECOM Co., Ltd be liable for any lost profits or special, consequential, indirect, punitive damages arising out of the use of this product.
• ELECOM Co., Ltd will have no liability for any loss of data, damages, or any other problems that may occur to any devices connected to this product.

Safety Precautions

Prohibited action
Mandatory action
Situation that needs attention
WARNING
If a foreign object (water, metal chip, etc.) enters the product, immediately stop using the product, remove the product from the PC. If you continue to use the product under these conditions, it may cause a fire or electric shock.
If the product is behaving abnormally, such as by generating heat, smoke, or a strange smell, immediately stop using the product, shut down the PC, and then sufficiently check whether the product is generating heat while being careful to avoid being burned. Then, remove the product from the PC. After that, contact the retailer from whom you purchased the product. Continuing to use the product under these conditions may cause a fire or electric shock.
Do not drop the product or otherwise subject it to impacts. If this product is damaged, immediately stop using it, remove the product from the PC. After that, contact the retailer from whom you purchased the product. Continuing to use the product while it is damaged may cause a fire or electric shock.
Do not attempt to disassemble, modify or repair this product by yourself, as this may cause a fire, electric shock or product damage.
Do not put this product in fire, as the product may burst, resulting in a fire or injury.
Do not insert or remove the connector with wet hands. Also, do not make alternations to or forcefully bend the connector. Doing so may cause a fire or electric shock.
CAUTION
Do not place this product in any of the following environments:

• In a car exposed to sunlight, a place exposed to direct sunlight, or a place that becomes hot (around a heater, etc.)
• In a moist place or a place where condensation may occur
• In an uneven place or a place exposed to vibration
• In a place where a magnetic field is generated (near a magnet, etc.)
• In a dusty place

This product does not have a waterproof structure.
Use and store this product in a place where the product body will not be splashed with water or other liquid.
Rain, water mist, juice, coffee, steam or sweat may also cause product damage.
Only use this product with PCs and video game systems.
Do not use this product with any device that may significantly be affected in the case of this product malfunctioning.
If this product is not going to be used for one month or longer, remove it from the PC.
When you no longer need to use this product, be sure to dispose of them in accordance with the local ordinances and laws of your area.
Cleaning the Product
If the product body becomes dirty, wipe it with a soft, dry cloth.
Use of a volatile liquid (paint thinner, benzene, alcohol, etc.) may affect the material quality and color of the product.
Limitation of Liability

• In no event will ELECOM Co., Ltd be liable for any lost profits or special, consequential, indirect, punitive damages arising out of the use of this product.
• ELECOM Co., Ltd will have no liability for any loss of data, damages, or any other problems that may occur to any devices connected to this product.

Compliance status www.elecom.co.jp/global/certification/
**** This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.  this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

In order to make improvements to this product, the design and specifications are subject to change without prior notice.
Responsible party :
ELECOM USA, Inc.
4041 MacArthur Blvd Suite 400, Newport Beach, CA 92660 USA elecomusa.com

Please see the Web manuals for German, French, Spanish and Italian versions: www.elecom.co.jp/global/download-list/

Wireless Mouse:  M-CAD01DB
Equipment name:  Type designation (Type)

Unit| Restricted substances and its chemical symbols
Lead (Pb)| Mercury (Hg)| Cadmium (Cd)| Hexavalent chromium (Cr+6)| Polybrominated biphenyls (PBB)| Polybrominated diphenyl ethers (PBDE)
1| ○| ○| ○| ○| ○| ○
2| ○| ○| ○| ○| ○| ○
3| ○| ○| ○| ○| ○| ○
4| ○| ○| ○| ○| ○| ○
Note 1 : “Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.
Note 2 : “○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.
Note 3 : The “−” indicates that the restricted substance corresponds to the exemption.

** M-XT2UR: MSIP-REM-ELJ-M-XT2UR
XT2UR: R-R-ELJ-XT2UR
CE Authorised representative : 38 avenue John F. Kennedy, L-1855 Luxembourg
** Only for M-XT2UR
Please see the current state of RoHS compliant:www.elecom.co.jp/global/certification/
WEEE Disposal and Recycling Information
**** This symbol means that waste of electrical and electronic equipment (WEEE) should not be disposed as general household waste. WEEE should be treated separately to prevent possible harm to the environment or human health. Consult your retailer or local municipal office for collection, return, recycle or reuse of WEEE.
ELECOM CO., LTD.
Fushimimachi 4-1-1, Chuo-ku, Osaka City
www.elecom.co.jp/global/

• ELECOM CO., LTD. owns the copyright of this manual.
• Unauthorised copying and/or reproducing of all or part of this manual is prohibited.
• If you have any suggestions or doubts about this Manual, please contact your deader.
• The specifications and appearance of this product may be changed without prior notice for product improvement purposes.
• We shall bear no responsibility for any device failure or malfunction of other devices resulting from the use of this product.
• To export the part of this product applicable to strategic goods or services, export or service trading permission according to foreign currency laws is necessary.
• Windows is a trademark of the Microsoft group of companies.
• Company names, product names, and other names in this manual are either trademarks or registered trademarks.

A customer who purchases outside Japan should contact the local retailer in the country of purchase for enquiries.
In “ELECOM CO., LTD. (Japan)”, no customer support is available for enquiries about purchases or usage in/from any countries other than Japan. Also, no foreign language other than Japanese is available. Replacements will be made under stipulation of
the Telecom warranty.

Wireless Mouse
Manual, Safety precautions, and Compliance with regulations
2nd edition, August 1, 2023
©2023 ELECOM Co., Ltd. All Rights Reserved.
MSC-M-XT2UR-0802 ver.315

References

• ELECOM USA
• ELECOM Global | エレコム株式会社
• Download - ELECOM Global | エレコム株式会社
• ELECOM USA
• ページを移動します
• ページを移動します

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>