Aluratek AIS01F iStream DockFree Bluetooth Audio Receiver User Guide
- June 13, 2024
- Aluratek
Table of Contents
Aluratek AIS01F iStream DockFree Bluetooth Audio Receiver
Product Information
The iStream DockFree Bluetooth Audio Receiver is a device that allows you to transmit music wirelessly from your digital device to any speaker or dock with a 3.5mm audio jack. It has a range of up to 33 feet and supports the A2DP profile for high-quality audio streaming. The device can be charged using the included USB cable and has a power button for easy operation. It also features LED indicators to indicate its status.
Product Usage Instructions
- Before using the iStream, it is recommended to fully charge the battery. Connect the USB end of the provided cable to your PC and the charger plug to the charging jack of the iStream. Charge the battery for a minimum of 3 hours. The red LED will be on during charging and turn off when charging is complete.
- To pair the iStream with a transmitter device like an iPhone, smartphone, or tablet, follow these steps:
- Make sure the iStream is turned off.
- Press and hold the power button for 6-7 seconds to activate pairing mode. The LED will flash red and blue alternately.
- Activate your device’s Bluetooth function and set it to search for Bluetooth devices. Select “AIS01F” when it is found.
- If prompted for a PIN, enter “0000”.
- If prompted by your device to connect, select “Yes”.
- After successful connection, the blue LED will flash twice every 5 seconds.
- To power on the iStream, press and hold the power button for 3-5 seconds.
- To power off the iStream, press and hold the power button for 3-5 seconds.
- To enter pairing mode again, ensure the iStream is turned off and press and hold the power button for 6-7 seconds until the LED flashes red and blue alternately.
- Make sure the audio output on your device is set to Bluetooth/AIS01F for audio streaming.
If you need further assistance or troubleshooting, you can contact Aluratek support via:
- E-mail: support@aluratek.com
- Web: www.aluratek.com/support
- Local (Tustin, CA): 714-586-8730
- Toll free: 1-866-580-1978
The iStream DockFree Bluetooth Audio Receiver comes with a
1-year warranty. For more information, visit http://aluratek.com/warranty-
return-policy.
You can also register your product online at http://aluratek.com/product-
registration.
Please refer to the user guide of your specific device for detailed
instructions on pairing and using Bluetooth.
Note: This equipment complies with the limits of a Class B digital device
and is designed to provide reasonable protection against harmful interference
in a residential installation.
For the complete user manual, you can visit https://manual-hub.com/.
Product Application
Operation
Charging the battery
The battery is not fully charged and it is highly recommended that you charge
AIS01F before you begin using it.
Note: Using AIS01F “out of the box” will not harm the device. You will
experience reduced battery life as the unit will not be fully charged.
Connect the USB end of the cable provided to your PC and the charger plug to
the charging jack of AIS01F. Please charge the battery for a minimum of (3)
hours. The Red LED will be on while charging. When charging is complete, the
red LED will turn off.
Note: The pairing mode will last 2 minutes. AIS01F will switch to the
standby mode automatically if no devices can be connected within 2 minutes.
Pairing with the transmitter such as iPhone, smartphone, and tablet:
Please make sure the device supports A2DP profile. The pairing procedure will
vary depending on the actual device. Please refer to the user guide of your
device for detail instructions. The general pairing procedures are as follows:
- Make sure AIS01F is turned Off.
- Activate AIS01F pairing mode by press and hold the power button for 6-7 seconds.
- Activate your device’s Bluetooth function and set your device to search for Bluetooth devices. Select AIS01F when it is found.
- For transmitters with Bluetooth version 2.1, you will not need to input a code. If you are prompted for PIN, please enter “0000”.
- If prompted by your device to connect, please select “Yes”.
- After connecting successfully, the blue LED will flash twice every 5 seconds.
Note: Please make sure the audio output is set to Bluetooth / AIS01F for audio streaming from the device.
Tech Support & Warranty Information
If you need further assistance, please contact the Aluratek support department for troubleshooting prior to returning this device.
- E-mail: support@aluratek.com
- Web: www.aluratek.com/support
- Local (Tustin, CA): 714-586-8730
- Toll free: 1-866-580-1978
Aluratek warrants this product against defect in material or workmanship for 1
Year from the date of purchase.
For more information, please visit: http://aluratek.com/warranty-return-
policy.
You can register your product online at: http://aluratek.com/product-
registration.
Radio and TV Interference Statement
WARNING!!! This equipment has been tested and found to comply with the
limits of a Class B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by whatever measures may be required to correct
the interference.
qsg Q10231 Copyright © 2012 Aluratek, Inc. All Rights Reserved
aluratek.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>