PHILIPS SRP2018 Universal Remote Control User Guide

PHILIPS SRP2018 Universal Remote Control

Insert Batteries (not included)

Set Up By Code Selection

1. 1 Switch on your device.
2. Press and hold the device selection button (e.g.TV) for 5 seconds until the red LED is on.
3. Look up the 5-digit code for your brand in the code list. Codes are listed by the device type and brand name. The most popular code is listed first.
4. Enter the first 5-digit code using the digit buttons.
5. If the light is off, a valid code is saved. Otherwise, the light will flash once and then remains on for code re-entry.
6. Operate the device with the universal remote. If your device responds correctly, it means you have entered the right code. Otherwise, repeat from step 2, and enter the second code on the list.
   

Learn Code From Other Remote

You must have an original remote for the Universal Remote Control (URC) to learn code from it.

1. Press and hold the device selection button (e.g.TV) for 5 seconds until the red LED is on.

2. Enter the learning code 9 9 9 0 0. The red LED will flash once and then remain on.

3. Place the URC and the original remote, head to head aiming at each other on a flat surface.

4. On the URC, press the button that you would like to learn a code from the original remote.The LED indicator will blink twice and stay on.

5. On the original remote, press and hold the button that you would like to learn from for 2 seconds.

6. The LED will blink once and stay on if the learning is successful.
   To learn another key, repeat Step 4.
   To exit press the device button again.

7. The LED will blink 6 times quickly if learning failed. Repeat Step 4 to learn again.
   

Frequently Asked Questions

My universal remote does not work at all.
• Check if you have correctly set up the device with the right code.
• Check if you have pressed the corresponding device key for your device.
• Check if the batteries are inserted properly. If the battery level is low, replace the batteries.
• Check if your device is powered on.
If several device codes are listed under the brand of my device, how can I select the correct device code?
To seek the correct device code, test the codes one by one.The codes are sorted by popularity, and the most popular code is listed first.
My device responds only to some of the commands.
You have set a code for which only some commands work properly but some do not.Try other codes until most keys work properly or learn the key from original remote if it supports the learning function.

Most Popular TV Brand & Code

13346| 16105
13248| 16007
13140| 15909
13042| 15801
19459| 13403
18753| 13248
16842| 13615
19332| TELEFUNKEN| 19253
PANASONIC| 19753| 17244
14042| 13732
13846| 15276
13748| 12457
11356| 19740
13944| 17342
19655| 16738
19332| 16026
19326| 18339
13640| 10223
13542| 14716
19136| 14314
11027| 10511
15178| 11704
15070| 14741
LG| 19851| 13248
12846| THOMSON| 11343
19332| 14849
15757| 15662
14950| 15564
16725| 14466
SAMSUNG| 14140| 12963
10065| 10960
12441| 12251
19332| 17646
19911| 17548
12919| 13634
12846| 10821
SONY| 14352| 17013
16744| 14716
15045| 14618
14741| 10916
19557| 12745
SCHNEIDER| 18560| 10619
18462| UNIVERSUM| 19332
19345| 11533
10840| 10929
19332| 10625
10929| 10125
10625| 19911
18918| 19617
17415| 16513
15510| 15314
14412| 15010
13311| 14912
12615| 14118
11612| 13615
11416| 13517
15203| 11612
11008| 19709
10606| 18206
19740| 16703
13248| 16507
18826| 16007
10619| 15409
19740
18943
18826
10619

Scan QR code for on-line

User Manual and Code List.

Specifications are subject to change without notice.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.
This product has !been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or
one of its affiliates, and MMD Hong Kong Holding limited is the warrantor in relation to this product.

References

• Support Home | Philips

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>