MORVAT MOR-BWPR-A Heavy Duty Water Pressure Regulator with Gauge Instructions
- June 4, 2024
- MORVAT
Table of Contents
MORVAT MOR-BWPR-A Heavy Duty Water Pressure Regulator with Gauge
Instructions
Inductions
-
Step 1
The RV Regulator’s upstream side will connect directly to the water source. -
Step 2
The downstream side will connect to your water filter which will then connect to your RV.
-
Step 3
Open up all faucets in the 1W to ) flush the system, and expel any air remaining in the pipes. **Keep faucets open until Step 6.
**
-
Step 4
Ensure there is a shut-off in the off position between the regulator and the RV. This is important to ensure pressure remains safe while calibrating the PSI. -
Step 5
Turn on the water supply and use the included screwdriver to adjust the gauge to the desired PSI level. (40 to 50 PSI is ideal for many RVs)
-
Step 6
Open the shut-off valve and allow the now regulated after to enter the RV’s water pipes. Wait until the faucets have a smooth flow of water, without air. You can then turn off your faucets and double-check that the gauge is set to the correct PSI level.