niceboy Charles i6 Robotic Vacuum User Manual

niceboy Charles i6 Robotic Vacuum

Product Information

• Product Name: Charles i6 Robotic Vacuum
• Language: CZ, SK, DE, EN
• Contents of the Package: Vacuum cleaner, Charging base, HEPA filter, Mop attachment, Side brushes, User Manual

Product Usage Instructions

1. First Start-up:
   • Remove the stickers located on the sides of the front bumper.
   • Connect the adapter to the charging base and place it flat against the wall. Ensure there are no objects within 1m on the left and right sides, and within 2m in front of the front side. Avoid placing the base near reflective surfaces like mirrors.
   • Attach the side brushes.
2. App Connection:
   • Download the “Niceboy ION” app by scanning the QR code with your mobile phone or searching for it in the Google Play/Apple App Store.
   • Open the app and register a new account or use your existing account.
   • Log into the app and click on the “+” icon to add a product, then select “Add Device”.
   • Go to the “Robotic Vacuums” tab and choose “Charles i3 Plus”.
   • Insert the vacuum cleaner into the charging base and switch it on.
   • Press the “Home” button for approximately 6 seconds to connect to the app. A beep will indicate successful connection.
3. Device Status:
   • Refer to the product diagram for a visual representation of the vacuum cleaner’s components.
   • The vacuum cover houses the dust container and dual container cover.
   • The HEPA filter is located inside the dual container cover.
   • The charging indicator shows the charging status.
   • The fall prevention sensors and charging contacts are situated on the bottom of the vacuum cleaner.
4. Maintenance:
   • Clean the fall prevention sensors and charging contacts using a soft cloth.
   • Refer to the user manual for detailed maintenance instructions.
5. Mopping:
   • Attach the mop attachment by securing it to the velcro.
   • Do not moisten the mop before attaching it, as it will self-moisten during use.
     Note: Please refer to the complete user manual for detailed instructions on product usage, parameters, and additional features.

Product diagram

Operating instructions

First start-up

1. Removing stickers
   Remove the stickers located on the sides of the front bumper

2. Connect the adapter to the charging base
   Place the charging stand flat against the wall. Do not place objects on the left and right sides within 1m and in front of the front side within 2m. The base should not be located near objects with a strong reflective surface (mirrors).

3. **Attach the side brushes

**

4. Charging the device
   Place Charles in the charging base. Turn on Charles using the power button on the top of the device. The blue „house“ light flashes to indicate that the battery needs to be charged. A steady blue light indicates charging. When charging is complete, the light goes off. When using the device for the first time, charge the device for more than 6 hours.

Dual container for water and dust
The device is equipped with dual tanks for water and dust, thanks to which it is possible to vacuum and wipe at the same time. The dust container contains two washable filters, which should be washed clean with running water approximately every 15-30 days. The filters themselves should be replaced approx annual use (if the filters are heavily soiled, it is advisable to change them more often). It’s in the water container it is possible to pour a low-foaming cleaning agent together with the water.

App connection

1. Download the app by scanning the QR code with your mobile phone or search for „Niceboy ION“ in the Google Play/Apple App Store and download the app.
2. Open the „Niceboy ION“ app and register a new account or use your existing account.
3. Once you have logged into the app to add a product, click on the „+“ in the top right corner and then „Add Device“.
4. Then go to the „Robotic Vacuums“ tab and select „Charles i3 Plus“.
5. Insert the vacuum cleaner into the charging base and switch it on with the power button.
6. Press the „Home“ button for approximately 6 seconds to connect to the app. A beep will then sound and the WIFI icon will flash rapidly. In the app, select the Charles i6 vacuum cleaner, select your WIFI and enter your password. Continue to the next page using the „Next“ button. Now wait until the vacuum cleaner connects to the app. If Charles does not connect, try the process again. Make sure your WIFI is transmitting on the 2.4 GHz frequency. If it doesn‘t on the second try, try connecting the vacuum to a different WIFI module. For example, you can use a mobile phone with a hotspot function for this test. If you are still unable to connect the vacuum cleaner in this way, please contact our technical support.
7. Once the device is successfully connected, you can edit the device name and add it to the room of your choice. Click on „Done“ to access the vacuum cleaner interface..
   To connect to the app, your WIFI network must be transmitting at 2.4 GHz.

Device status

On/Off
When Charles is switched off, press and hold the power button, see picture above. The LED light will stop flashing and Charles will enter standby mode.

Standby mode
When Charles is in standby mode, both LEDs are lit simultaneously. Charles enters standby mode based on various factors.

• If the device is already connected to the WIFI/application, it will automatically turn off after 5 minutes.
• If the device has not been connected to the WFI/application, it will automatically shut down after 30 minutes

Automatic cleaning
To start the automatic cleaning, press the power button briefly, followed by an audible signal and the automatic cleaning begins. Automatic mode is suitable for complex room cleaning.

Spot cleaning

• To start spot cleaning, press the power button briefly, followed by an audible signal and the automatic cleaning begins. The spot cleaning mode is suitable for cleaning smaller dirty areas.
  Place the Charles on the dirty spot and start spot cleaning. Charles will then start to circle the area and after 2-3 minutes of cleaning will return to the charging station.

Wall cleaning

• To start wall cleaning, you must first connect the vacuum cleaner to the Niceboy ION app.
• Then select wall cleaning in the app. Charles will start vacuuming the area along the wall, then returns to the docking station when the cleaning is complete.

Maintenance

Dual container

• Open the top cover of the device and remove the dual container.

• Empty the dirt and return the dual container into the vacuum cleaner.
• The dual container contains two washable filters that should be washed with clean running water approximately every 15-30 days.

Side brushes
Turn Charles upside down (with the wheels up), remove the side brushes and clean them. If the side brushes are damaged, replace them with different ones.

Mopping cloth
Turn Charles over, take off the mopping cloth and wash it. After drying, you can return it.

Main brush
To clean the main brush, first remove the plastic cover located on it. Then remove the brush and clean it.

Cliff sensors
Wipe the cliff sensors and charging pins at the bottom of the vacuum cleaner with a soft cloth.

Mopping

First, attach the wiping cloth

• Remove the white tape on the back of the velcro .
• Make sure there is no dust or water droplets on the bottom of the vacuum cleaner. Then stick velcro to the designated areas at the bottom of the vacuum cleaner.

• Attach the mop to the velcro.
• Do not soak the mop before attaching, the cloth will soak itself during mopping.

Fill the water container
Remove the dual container from the vacuum cleaner, take off the secondary soft filter and fill the water container with water. Close the container, return the secondary filter to its position and put the container back into the vacuum cleaner.

Package contents

1. Robotic vacuum cleaner
2. Charging base
3. Side bristles 4x
4. Power adapter
5. Instruction manual
6. HEPA filter
7. Dual container
8. Mopping cloth and velcro
9. Cleaning brush

Parameters

• Product model: Charles i6
• Measurements: L310 W310 H 76 mm
• Voltage: DC 11,1 V
• Suction power: 2 500 Pa
• Battery capacity: DC 11,1 V Li-ion 2 600 mAh
• Volume of the dual container – dust: 650 ml
• Volume of the dual container – water: 220 ml
• Cleaning time: Up to 120 min
• Charging time: 300 min
• Nominal docking station voltage range: 220–240 V
• Rated frequency: 50–60 Hz
• Nominal docking station input voltage: 15 V / 0,8 A
• Docking station output voltage: 15 V / 0,8 A

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>