HATOR HTM-530 Pulsar 2 PRO Wireless Mouse User Manual

Wireless
User Manual

HTM-530 Pulsar 2 PRO Wireless Mouse

HTM-530 (Black)
HTM-531 (White)
HTM-532 (Yellow)
HTM-533 (Mint)
HTM-534 (Lilac)

Specifications

4000-8000-16000CPI
Acceleration| 40G
Polling rate| From 250 to 1000Hz
Operating Voltage| 5V
Operating Current| 150mA
Battery Capacity| 700mAh
Low Latency in 2.4GHz mode| <8ms
Work time in 2.4GHz mode| up to 25H (backlight is on)
up to 50H (backlight is off)
Charging time| 2.5H
Standby| 6 months
Switches type – operating life – operating force – releasing force| Kailh GM8.0 “Black Mamba”
80 million clicks
65 ±10%gf
25qf min
Side switches| Kailh
Encoder| TTC Gold
LED Type| RGB
Operation Distance| up to 10m
Cable| 1.8m with a ferrite filter
2.4GHz dongle| is included
Dimentions| 123x68x38mm
Weight| 84g

In the box

1. Mouse HATOR Pulsar 2 PRO Wireless
2. 2.4GHz dongle
3. Detachable USB-A to USB Type-C cable
4. Replacement 100% PTFE skates
5. User manual

Platforms
Windows 10, 11 / Mac OS / iOS / Android / Linux

Operation of the device

Wired mode
Connect to PC:

1. Connect the cable and turn the switch on the back of the mouse to wired mode, the operating system recognizes the mouse automatically.
2. If necessary, download the software from the site www.hator.gg/download.
3. If the PC does not recognize the device, try connecting to a different port.

2.4GHz wireless mode
Before the first connection, check the charge level of the device.
To check this press Left Mouse button – Right Mouse Button – Scroll Wheel at the same time.
The indicator shows the charge level: Discharged – red light Half charged – yellow light Fully charged – green light
When you check the battery level, the mouse does not work until the indicator flashes (about 10 seconds).
Switch between wired and wireless mode

1. The device automatically switches to wired mode as soon as the cable is connected.
2. Disconnecting the cable automatically switches the device to wireless mode.

With the switch (OFF), you can turn off the mouse when you don’t need it (for wireless mode only).
You can switch to energy-saving mode (ECO)

DPI and Poling Rate Switch

All indicators light up when the backlight mode is ON.
Setting the DPI
Select the required DPI by pressing the button:
500 – the Indicator lights up green
1000 – the indicator lights up blue
1500 – the indicator lights up red (set by default)
2400 – the indicator lights up yellow
4000 – the indicator lights up cyan
8000 – the indicator lights up purple
16000 – the indicator lights up white
Setting the Polling Rate
Select the required by pressing the button:
250 Hz – the indicator lights up blue
500 Hz – the indicator lights up green
1000 Hz – the Indicator lights up red (set by default)

Indicators

Charging mode indicator:
Charging – red light
Fully charged – green light
Low power – red light flash (3 times per second)

The mouse will go to sleep mode after 1 minute of not using it. To activate the mouse, move it or press any button.

Manufacturer’s warranty

Provided that the user observes the rules of operation, and taking into account the warnings set forth in this user manual. the device is safe to use and does not cause harm to the environment and humans, as well as is suitable for operation. The device has a warranty period: 24 months from the date of Purchase excluding the time of repair (subject to the rules of operation). The right to warranty Is granted by filling in the information of the attached warranty card. For more information about the product, as well as for any questions or suggestions, please contact us at the address below. The warranty is provided in addition to the rights granted under local consumer laws. Its terms may vary in different countries. Please read the full warranty information to learn about your consumer rights and additional remedies provided under this product warranty.
Instructions for use:
– Product cannot be opened or modified
– Do not disassemble the device or attempt to service it
– If the product is in an environment whose temperature exceeds the permissible range, turn off the device and wait until the operating temperature stabilizes within the specified range.
– Do not allow liquid to fall on the product
Violation of the operating rules may lead to the loss of the ability to operate the equipment and the loss of the warranty.
If the product doesn’t work properly, contact HATOR support: hator.gg
The warranty is In addition to the rights granted under local consumer laws. Its conditions may differ depending on the country.
Some forms of exercising consumer rights when ensuring product warranty obligations can be performed through retail outlets (including online stores), which, in turn, are fully responsible for compliance with consumer rights protection laws.
The rules for disposal of this product differ from the rules for disposing of household waste. Unlike household waste, the product should be handed over to the appropriate point of reception of electrical and electronic equipment for processing. This contributes to the conservation of natural resources. By observing the rules for the disposal of the product, you prevent possible negative consequences for the environment and human health caused by improper disposal. Transfer the device to a specialized waste collection and disposal center or contact the seller from whom the device was purchased. Competent people will send this device to environmentally safe recycling. For improper disposal of waste, fines are issued in accordance with the legislation in force in the country where the device is sold.

Supplier / Importer in EU: HATOR Gaming a.v
Address: Prins Hendrikkade 21-E,1012T1, Amsterdam
The Netherlands, sales@hator.gg
Warranty period: 24 months
c2023 HATOR. All rights reserved.
All registered trademarks are property of their respective owners.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>