marta MT-1599 Kitchen Food Processor with Hand Blender User Manual

: June 13, 2024
: MARTA

Table of Contents

marta MT-1599 Kitchen Food Processor with Hand Blender
Product Usage Instructions
Description
PRECAUTIONS
BEFORE THE FIRST USE
USING THE DEVICE
CLEANING AND MAINTENANCE
SPECIFICATION
WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

marta MT-1599 Kitchen Food Processor with Hand Blender

marta-MT-1599-Kitchen-Food-Processor-with-Hand-Blender-
product

Product Usage Instructions

Before the first use, make sure to clean the device thoroughly.
Connect the appliance to a power supply of 230 V ~ 50 Hz.
Insert the desired attachment (blender, whisk, or chopper) into the motor block.
Adjust the speed using the speed controller.
Press the on/off button to start the appliance.
For extra power, press the TURBO button.
After use, detach the attachments and clean them according to the cleaning and maintenance instructions.

Note: The real set of the appliance may vary from what is listed in the user manual. Please check the contents of your purchase.

Description

marta-MT-1599-Kitchen-Food-Processor-with-Hand-Blender-
fig-1

Speed controller
On/off button
TURBO button
Motor block
Detachable blender
Upper part of the whisk
Metal part of the whisk
Chopper cover
Chopper cup
Measure cup

Real set of the appliance could be different from listed in the User manual. Check once buy.

PRECAUTIONS

CAUTION

Read this manual carefully before using the appliance and save it for future reference.

Before the first use, check the device specifications and the power supply in your network.
It is not intended for industrial use. For indoor use only. Use only for domestic purposes according to the instruction manual.
Do not use with damaged cord, plug or other injuries. Keep the power cord away from sharp edges and hot surfaces.
Do not pull the cord. Always take the socket. Do not reel the cord around the device housing.
Never attempt to frame and repair the appliance by yourself. If you meet problems, please contact the nearest customer service center.
Using accessories or replacement parts that are not recommended or sold by the manufacturer may cause damage to the appliance.
Always unplug the appliance and let it cool down before cleaning and removing parts. Keep unplugged when not in use.
To avoid electric shock and fire, do not immerse in water or other liquids. If this occurs, immediately unplug it and contact service center for inspection.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Do not use the device for grinding solid products such as coffee beans or ice cubes.
Switch off the appliance before changing the accessories.
Be careful when using sharp blades.
Avoid any contact with sharp parts of the device while moving.
Incorrectly assembled device may cause fire, electric shock or other injury.
Maximum allowable continuous operating time is 30 sec. Turn off the device and allow the engine cool down for 1 min before continuing. After 4 rounds allow the engine cool down for 15 min before continuing.

BEFORE THE FIRST USE

Unpack the appliance and remove all packaging materials and labels.
Clean the motor block with a damp cloth, clean the accessories in soapy water rinse thoroughly and dry.
Set proper accessory.

USING THE DEVICE

USING BLENDER

Set blender accessory on the motor unit.
Place the accessory in the cup with the product, hold the handle.
Connect the device to the mains.
Push ON/OFF button (2) to start blending. Use the controller (1) to set the desired operating speed. When pressing and holding the button (3), the device will operate at maximum speed.
Move blender in the cup in a circular motion for proper grinding.
Don’t put blender in water over the line of attachment blender and motor unit.
In case cutting blades are blocked, turn off device & unplug the appliance from the mains.
After use, turn off device, remove blender from the mains and disconnect the accessory.

ATTENTION: Do not use the appliance to prepare firm dough (rolls, breads, etc.). If you use the device for mixing thick products, it may malfunction due to overload of the engine. Don’t grind very hard foods such as ice, nuts, coffee beans.
ATTENTION: The temperature of the treated mixture should not exceed 80°C.
ATTENTION: The duration of continuous operation with the blender, whisk should not exceed 50 seconds, for the shredding of products in the chopper the duration should not exceed 20-30 seconds. Make a break between work cycles for at least 4 minutes.

USING WHISK

Fix handle on the upper part of the whisk.
Fix the upper part of the whisk on the motor unit.
Place product inside of the cup.
Push ON/OFF button (2) to start blending. Use the controller (1) to set the desired operating speed. When pressing and holding the button (3), the device will operate at maximum speed.
After use, turn off device, remove blender from the mains and disconnect the whisk.

USING CHOPPER

Fix chopper blades inside of the chopper cup, add products.
Place the cover and motor block and fix it tight.
Connect the device to the mains.
Push ON/OFF button (2) to start blending. Use the controller (1) to set the desired operating speed. When pressing and holding the button (3), the device will operate at maximum speed.
After use, turn off device by pressing on/off button, remove blender from the mains and disconnect the chopper.

CLEANING AND MAINTENANCE

Before cleaning, always unplug the appliance.
Use wet cloth to clean the motor block. Do not immerse the appliance in water or other liquids.
Clean accessories in soapy water and dry.
Do not use chemical and abrasive cleaners for cleaning.
Recommended to clean the device right after operating to avoid coloring of plastic parts.

SPECIFICATION

Power supply
- 230 V ~ 50 Hz

Producer

COSMOS FAR VIEW INTERNATIONAL LIMITED
Room 701, 16 apt, Lane 165, Rainbow North Street , Ningbo, China
Made in China

WARRANTY

WARRANTY DOES NOT COVER SUPPLIES (filters, ceramic and non-stick coating, rubber seals, etc.)

Production date is available in the serial number located on the identification sticker on the gift box and/or on sticker on the device. The serial number consists of 13 characters, the 4th and 5th characters indicate the month, the 6th and 7th indicate the year of device production. Producer may change the complete set, appearance, country of manufacture, warranty and technical characteristics of the model without notice. Please check when purchasing device.Current information about service centers is available on the website http://multimarta.com/