sygonix 2813285 USB-C Solar Wall Light with PIR Sensor Instruction Manual

sygonix 2813285 USB-C Solar Wall Light with PIR Sensor

Product Information

Item no: 2813285
Description: This product is a spotlight with a sensor and multiple modes.

Product Features:

• Constructed according to protection class III
• Includes a sensor for automatic activation
• Multiple modes for different lighting settings
• Can be mounted on walls
• Powered by rechargeable batteries

Product Usage Instructions

Safety Precautions:

• Read the operating instructions carefully and observe the safety information.
• Keep the product out of the reach of children and pets.
• Handle the product carefully to avoid damage.
• Avoid placing the product under mechanical stress or extreme conditions.
• Consult an expert if you have any doubts about the operation or safety of the product.
• Follow proper procedures for battery handling and charging.
• Avoid looking directly into the LED light or beam.
• Ensure proper installation, avoiding cables or pipes when drilling or inserting fasteners.

Operating the Product:

1. Ensure the rechargeable battery is charged regularly.
2. To activate the spotlight, select one of the available modes: A, B, C, or D.
3. Mode A: The spotlight turns on with low brightness and stays on for 15 seconds before turning off.
4. Mode B: [Description of Mode B]
5. Mode C: [Description of Mode C]
6. Mode D: [Description of Mode D]

Troubleshooting:

• If the spotlight does not turn on, refer to the problem-solving section in the manual.
• Contact technical support or authorized personnel for maintenance, modifications, or repairs.

mode using the button.

Cleaning and Disposal:
Follow the instructions provided in the manual for cleaning and proper disposal of the product.

Intended use
The product is an LED lamp with motion sensor and light sensor. There are three lighting modes, and the battery can be recharged by the solar panel or USB-C® input. The product has an IP44 ingress protection rating. It is splash proof and suitable for outdoor use. Do not submerge in water. If you use the product for purposes other than those described, the product may be damaged. Improper use can result in short circuits, fires, or other hazards. The product complies with the statutory national and European requirements. For safety and approval purposes, you must not rebuild and/or modify the product. Read the operating instructions carefully and store them in a safe place. Make this product available to third parties only together with the operating instructions. All company names and product names are trademarks of their respective owners. All rights reserved. USB4®, USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum.

Delivery contents

• Product
• Mounting template (paper card)
• 2x Mounting screws
• 2x Dowels
• USB-C® to USB-A charging cable
• Operating instructions

Latest product information
Download the latest product information at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.

Description of symbols
The following symbols are on the product/appliance or are used in the text:

•     The symbol warns of hazards that can lead to personal injury.
• The symbol warns of dangerous voltage that can lead to personal injury by electric shock.
• ****This product is constructed according to protection class III.
• Read the operating instructions carefully.

Safety instructions

Read the operating instructions carefully and especially observe the safety informa-tion. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.

General

• The product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing ma-terial for children.
• If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.
• Maintenance, modifications and repairs must only be completed by a technician or an authorised repair centre.

Handling

• Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.

Operating environment

• Do not place the product under any mechanical stress.
• Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.

Operation

• Consult an expert when in doubt about the operation, safety or connection of the product.
• If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guaranteed if the product:
  • is visibly damaged,
  • is no longer working properly,
  • has been stored for extended periods in poor ambient conditions or
  • has been subjected to any serious transport-related stresses.

Li-ion battery

• The rechargeable battery is permanently built into the product and cannot be replaced.
• Never damage the rechargeable battery. Damaging the casing of the rechargeable battery might cause an explosion or a fire!
• Never short-circuit the contacts of the rechargeable battery. Do not throw the battery or the product into fire. There is a danger of fire and explosion!
• Charge the rechargeable battery regularly, even if you do are not using the product. Due to the re-chargeable battery technology being used, you do not need to discharge the rechargeable battery first.

LED light

• Do not look directly into the LED light!
• Do not look into the beam directly or with optical instruments!

Installation

• When penetrating the surface e.g. drilling or inserting fasteners, make sure no cables or pipes are damaged.
• Inadvertently penetrating electric cables causes the life-threatening danger of an electric shock!

Product overview

1. Light
2. Solar panel
3. Sensor
4. USB-C® 5 V input
5. Mode button
6. Mounting holes

Chosing a location
Find a location that exposes the solar module to full sunlight to allow the rechargeable battery to re-charge during the day.

Consider the following:

• The solar panel should be exposed to maximum sunlight. Do not set up the product in the shade or under any cover.
• Avoid the direct proximity of other light sources such as yard or streetlights, otherwise the product will not switch on automatically at nightfall.

Tips:

• The product can be powered via the USB input but will not be protected against ingress.
• This setup is only recommended for use indoors and sheltered areas.
• A longer USB charging cable may be needed to access the power supply.

Wall mount

When penetrating the surface e.g. drilling or inserting fasteners, make sure no cables or pipes are damaged. Inadvertently penetrating electric cables causes the life-threatening danger of an electric shock!

1. Use the included paper template to mark holes on the surface.
2. Drill holes on the marked positions.
3. Leave some of the screw head protruding.
4. Hang the product onto the screws
   • Make sure the product is securely mounted before letting go.

Recharge batteries
Important:
To maximize charging efficiency, keep the solar panel(s) clean and free from debris.

• Solar charge the battery under bright sunlight for at least 8 hours:
  • Before first use
  • After prolonged periods without exposure to sunlight e.g. rain.

Tips:

• Recharge the battery via the 5 V USB-C® input if using for the first time or the weather is not suitable for solar charging (e.g., rain, overcast).
• A charging icon will light up to indicate the product is connected to the power supply.

Operation **

**

Note:
There is an integrated light sensor that responds to ambient light levels. The product will be active when ambient light falls below a set level (nighttime). The product will deactivate when the ambient light rises above a set level (daytime).

Setting light modes
Preconditions:

• Ambient light levels have dropped, and the motion sensor is active.
• The battery is charged.
  1. Press the mode button repeatedly to cycle through modes.
  • A mode icon will light up to indicate which mode is active.
  2.  The different modes are as follows:

• Light ON (low)
• When the motion sensor is triggered, brightness increases for approx. 15 seconds then returns to: light ON (low)

C:|

• Light is OFF
• When the motion sensor is triggered, bright light switches ON approx. 15 seconds then switches OFF.

D:| Power OFF

Motion detection
The product is equipped with a motion sensor that activates when movement is detected.

For best motion detection:

• The subject should move across the sensor.
• The sensor should not be placed behind glass.

Detection range: 3-5m
Detection angle: 120°

Cleaning and care
Important:

• Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions. They dam-age the housing and can cause the product to malfunction.
• Do not immerse the product in water.
• Keeping the solar panels clean will maximize charging efficiency.
• Clean the product with a fibre-free cloth.

Disposal

This symbol must appear on any electrical and electronic equipment placed on the EU market. This symbol indicates that this device should not be disposed of as unsorted municipal waste at the end of its service life. Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner, must be removed by end users from the WEEE in a non-destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back of waste. Conrad provides the following return options free of charge (more details on our website):

• in our Conrad offices
• at the Conrad collection points
• at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG

End users are responsible for deleting personal data from the WEEE to be disposed of. It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany.

Technical data

This product contains a light source of energy efficiency class F.
Rechargeable battery ………………………. 1x (3.7 V 18650 1800 mAh) Li-ion
USB-C© input…………………………………. 5 V/DC 1 A
Energy consumption………………………… Mode B/C: 6 kWh / 1000 h
Solar panel …………………………………….. Polycrystalline 5.5 V 2.6 W
Battery recharge time ………………………. Approx. 8 hours (optimum conditions)
Battery life (full charge)…………………….. Mode A: approx. 9 hours (continuous)
Mode B: approx. 8 hours (150 x 15 sec. activations)
Mode: C: approx. 8 hours (150 x 15 sec. activations)
Light modes……………………………………. Mode A: Light ON (5 lm)
Mode B: Light ON (50 lm), sensor trigger (500 lm for 15 secs)
Mode C: Light OFF, sensor trigger (500 lm for 15 secs)
Mode D: OFF
Light sensor thresholds ……………………. ON: <30 lux / OFF: >50 lux
Sensor type ……………………………………. PIR
Motion sensor (PIR)…………………………. Detection range: 3 – 5 m
Detection angle: 120°
Ingress protection……………………………. IP44
Colour temperature………………………….. 6500 K (cool white)
Brightness………………………………………. max. 500 lm
Protection class ………………………………. III
Operating temperature …………………….. -20 to +40 °C
Storage temperature………………………… -20 to +50 °C
Dimensions (L x W x H)……………………. 188 x 87 x 174 mm
Weight …………………………………………… 300 g

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited. This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2813285_V3_0923_dh_mh_en 27021598692525067-2 I4/O3 en

References

• Conrad Electronic » All parts of success
• Download center

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>