KASTEL C64-S Floodlight LED Instruction Manual
- June 13, 2024
- KASTEL
Table of Contents
KASTEL C64-S Floodlight LED
Product Information
The product is called KASTEL LX TIME SENS. It is a sensor with a detection distance of 3-10m.
Product Usage Instructions
- Locate a suitable area for installation where the sensor can detect movement within the desired range.
- Ensure that the sensor is securely mounted or positioned in the chosen area.
- Connect the sensor to a power source according to the provided electrical specifications.
- Adjust the sensitivity setting of the sensor based on your requirements. The sensitivity can be adjusted using the SENS control.
- Once the sensor is powered on and properly configured, it will start detecting movement within its specified range.
- When movement is detected, the sensor will trigger an action or signal, depending on its intended use and connected devices.
- Monitor and test the sensor’s functionality periodically to ensure proper operation and reliability.
- If necessary, refer to the user manual for additional information or troubleshooting steps.
Please note that these instructions are a general guide, and it is important to refer to the specific user manual provided with the product for accurate and detailed instructions.
Installation instructions
Precaution
- Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with Your Local Authority or retailer for recycling advice.
FEATURES
- Rated voltage, frequency, power factor.
- Power, luminous flux.
- Color temperature, color rendering index.
- Appliance classes.
- Lifetime.
- International Protection Rating.
- Protection against mechanical impacts.
- Caution, risk of electric shock.
- It does not work with a dimmer.
- For internal/external use.
- Replace the defective lamp cover immediately.
- The angle of illumination.
- It does not work with cross and stair connectors.
- The minimum distance from the illuminated object.
- Working temperature.
- Maximum working time.
-
* Bemko Sp. z o.o.- ul.Bocznicowa 13
- 05-850 Jawczyce
- www.bemko.eu
Security
Before mounting, read the instructions and disconnect the power supply.
Installation of the luminaire should be performed by a qualified user
authorized to mount electrical devices depending on the applicable regulations
in a given country, in accordance with the mounting diagram. Modifications to
the product may cause threat and loss of warranty.
Maintenance
All maintenance work should be carried out after disconnecting the power supply. The product temperature may rise to an elevated value. Before commencing maintenance, make sure that the product temperature is safe to make it. Guarantee unrestricted air supply, do not cover the product. Use dry and delicate materials for cleaning. The luminaires are not designed for cooperation with dimmers and automation elements that may have an impact on shortening the product’s service life. Do not use chemical agents. Product not adapted to work in an environment with unfavorable conditions, i.e. high dustiness/humidity, water, explosive zones, vibrations, and chemical fumes.
Recommendations
Failure to follow the instructions in the manual may result in a fire,
electric shock, burns, or other damage. Bemko sp. O.o. is not responsible for
failure to comply with the above recommendations. We also reserve the right to
make changes to the manual – the current version is available at
www.bemko.eu.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>