niko PM353-651421-2 DALI-2 Master 12 13 m for flush Mounting Light Instruction Manual
- June 13, 2024
- niko
Table of Contents
niko PM353-651421-2 DALI-2 Master 12 13 m for flush Mounting Light
Product Information
- Product: Presence detector 353-651421-2
- Mounting: SnapFit
- Dimensions: 100 mm x 44 mm x 47 mm
LED Behavior
- Green LED: Continuous on, breathing, or flashing
- Red LED: Continuous on or breathing
- Blue LED: Flashing
Presence detector P48MR, DALI-2, master, 12-13 m, 360°, SnapFit, for flush mounting, WAGO WINSTA® MIDI 2 X 2 m cable with 5-pol. connectors
Wiring
Dimensions
Installation
App settings
LED behaviour
Specifications
- Article number …………………………………………………………………………………….. 353-651421-2
- Configuration …………………………………………………………………………………………DALI-2 master
- Input voltage ……………………………………………………………………………..230 Vac ± 10 %, 50 Hz
- Maximum power consumption ………………………………………………………………………….. 0.6 W
- Maximum power consumption wireless link active …………………………………………… 0.65 W
- Short circuit behaviour shutdown trigger …………………….voltage below 12 V, exceeding 1.3 s
- Short circuit behaviour restart period ………………………………………… every 14 s until success
- Detector output. …………………………………………………………….. DALI Broadcast/DALI Adressable
- Circuit breaker ……………………………………………………………………..maximum MCB rating 16 A*
- Relay contac t…………………………………………………………………. NO (max. µ10 A), potential-free
- Maximum load incandescent and halogen lamps (cosφ = 1). ………………………………. 2300 W
- Maximum load fluorescent lamps (cosφ ≥ 0.5) ………………………………………………….. 1200 VA
- Maximum load economy lamps (CFLi) ………………………………………………………………. 350 W
- Maximum load LED lamps 230 V ………………………………………………………………………. 350 W
- Maximum load LED driver. ………………………………………………………………………………. 500 VA
- Maximum load electronic transformer ………………………………………………………………… 500 VA
- Maximum capacitive load ……………………………………………………………………………….. 140 µF
- Maximum switching current ……………………………………………….165 A/20 ms – 800 A/200 µs
- Maximum voltage on the DALI bus …………………………………………………………………….15 Vdc
- Maximum guaranteed current on the DALI bus …………………………………………………200 mA
- Maximum supply current ………………………………………………………………………………..250 mA
- Maximum startup time DAL I ……………………………………………………………………….< 1200 ms
- Maximum PIR detection startup time …………………………………………………………………… 70 s
- Maximum number of dimmable zones ………………………………………………………………………4
- Maximum number of control gear on the DALI bus …………………………………………………..64
- Light intensity range ………………………………………………………………………….20 – 2000 lux, ∞
- Switch-off delay …………………………………………………………………….. pulse, 20 s – 120 min, ∞
- Detection angle …………………………………………………………………………………………………. 360°
- Detection range (PIR ) ………………………………………………………….. ø 12 m from a height of 3 m
- Ambient temperature ……………………………………………………………………………..-25 – +40 °C
- Mounting method ………………………………………… flush mounting with SnapFit mounting bracket
- Mounting height …………………………………………………………………………………………..2 – 3.5 m
- Drill diameter …………………………………………………………………………………………………. 76 mm
- Minimum flush mounting depth ……………………………………………………………………… 100 mm
- Colour. ……………………………………………………………………………………………… white (RAL 9010)
- Dimensions visible (HxWxD ) ………………………………………………………….. 100 x 100 x 9.5 mm
- Dimensions (HxWxD) …………………………………………………………………. 120 x 120 x 109.5 mm
- Wire capacity …………………………………………………………………………………………..1.5/2.5 mm²
- Protection degree ………………………………………………………………………………………………. IP20
- Impact resistance. ……………………………………………………………………………………………… IK02
- Modification of settings …………………..app (iOS/Android) and 2-way Bluetooth® communication
- Maximum range Bluetooth® (free field, depending on the device) …………………………. 50 m
- Operating frequency ………………………………………………………………………………………. 2.4 GHz
- Maximum radio frequency power. …………………………………………………………………….-2 dBm
- Halogen-free ………………………………………………………………………………………………………..yes
- Marking . ………………………………………………………………………………………………………………CE
- Cable specifications
- Cable 1 colour ………………………………………………………………………………………………… grey
- Cable 2 colour ………………………………………………………………………………………………… gre
- Length. …………………………………………………………………………………………………………….2 m
- Wire cross-section ……………………………………………………………………………………. 1.5 mm²
- Voltage. …………………………………………………………………………………………………………400 V
- Rated current ………………………………………………………………………………………………….16 A
- Halogen-free …………………………………………………………………………………………………….yes
- Ambient temperature …………………………………………………………………………….-5 – +40 °C
- Type of connector cable 1. …………………………………………………….. male, 5-pole, light green
- Type of connector cable 2 ……………………………………………………………….male, 5-pole, pink
Detection area
Troubleshooting
Support & contact
ADDRESS: nv Niko sa Industriepark West 40 9100 Sint-Niklaas, Belgium
- TELL: +32 3 778 90 80
- EMAIL: support@niko.eu
Niko prepares its manuals with the greatest care and strives to make them as complete, correct and up to date as possible. Nevertheless, some deficiencies may subsist. Niko cannot be held responsible for this, other than within the legal limits. Please inform us of any deficiencies in the manuals by contacting Niko customer services at support@niko.eu.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>