YFZIT P2 Watch Wireless Charger Power Bank User Manual
- June 13, 2024
- YFZIT
Table of Contents
YFZIT P2 Watch Wireless Charger Power Bank
Product Information
- Product Name: Watch Wireless Charger Power Bank
- Capacity: 1200 mAh
- Output: 3W (MAX)
- Conversion Efficiency: 73%
- Input: DC 5V 2A
- Charging Port: Type-C
- Adapter Selection: QC2.0/QC3.0
- Compatibility: Apple Watch Series Ultra/ 8/ SE 2nd Generation/ 7/ 6/ SE/ 5/ 4/ 3/ 2
Product Usage Instructions
- Before using the Watch Wireless Charger Power Bank, please read the instructions carefully.
- Connect the charging port of the Watch Wireless Charger Power Bank to a Type-C adapter with QC2.0/QC3.0 support.
- Ensure that the input power is DC 5V 2A for optimal charging performance.
- Place your compatible Apple Watch Series Ultra/ 8/ SE 2nd Generation/ 7/ 6/ SE/ 5/ 4/ 3/ 2 on the wireless charger area of the Watch Wireless Charger Power Bank.
- The product has an adsorption function to accurately align the charging position of the smartwatch.
- The charging indicator will show the battery level of the Watch Wireless Charger Power Bank in 25% increments (0%-25%, 25%-50%,50%-75%, 75%-100%).
- Make sure to keep a distance of 0 cm surrounding the device and 0 cm above the top surface of the device during operation.
- Please refer to the FCC Warning section in the user manual for safety precautions and compliance guidelines.
- If you encounter any issues or need further assistance, consult the dealer or an experienced radio/TV technician.
Please read the instructions carefully before use
Specifications
- Capacity: 1200 mAh
- Output: 3W (MAX)
- Conversion Efficiency: ≥73%
- Input: DC 5V 2A
- Charging Port: Type-C
- Adapter Selection: QC2.0/QC3.0
Compatibility: Apple Watch Series Ultra/ 8/ SE 2nd Generation/ 7/ 6/ SE/ 5/ 4/ 3/ 2
Product Detail
Description
This product has an adsorption function, which can accurately align the charging position of the smart watch.
Safety warning
- Do not put this product into fire or water to avoid short circuit leakage or damage to the product.
- Please check the product, data cable and other accessories before use. Immediately stop using the product if you notice any damage.
- Do not use this product in a high temperature, humid or corrosive environment, so as not to damage the circuit and prevent charging or other
- Do not contact the product with corrosive liquids, otherwise it will cause serious damage and the product will not be guaranteed.
- Do not disassemble or modify this product for any reason, so as to avoid secondary failure and burning, which is not covered by the warranty
Thank you for choosing our product
FCC
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. During the operation of device a distance of 0 cm surrounding the device and 0 cm above the top surface ofthedevicemust be respected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>