PENTAIR 5800 XTR2 Water Treatment Components Instructions
- June 13, 2024
- Pentair
Table of Contents
5800 XTR2 Water Treatment
Components Instructions
5800 XTR2 Water Treatment Components
5800 XTR2
ENHANCED WITH ACCUSENSE™ TECHNOLOGY
TOP 3 TIPS FOR SUCCESS
Accuses technology brings additional efficiency to softening systems by
adapting to water hardness changes and allowing for more complete use of the
resin bed before triggering a regeneration. By reducing unnecessary
regenerations, this adaptive and efficient system can help yield up to a
30-50% reduction in salt usage and water waste.*
To help get the best performance from your sensor system, make sure to follow
these tips!
SUCCESS TIP #1: GET EDUCATED ON SENSORS
- Education is key to understanding how to design any system efficiently and what applications have the best potential for success with sensor technology. When installers do not take the time to learn how sensor systems work, it can end in poor results (i.e., hard water).
- Partner with your Pentair Representative and Preferred Distributor to take advantage of FREE training from Pentair experts.
SUCCESS TIP #2: PRETREAT DIRTY WATER
- In dirty water, elements in the water such as iron and manganese can coat the resin beads, preventing accurate conductivity.
- Iron resin cleaners can cause additional conductivity problems.
- A softener should not be expected to do an iron filter’s job.
- Install some type of Prefilter if iron or manganese is present.
SUCCESS TIP #3: PREVENT SENSOR DAMAGE – AVOID MIXED RESIN BEDS
- Mixed resin beds that contain coarse material like carbon can have a sandblasting effect that can ruin sensor probes.
- Mixing anion resin with cation resin can result in inaccurate conductivity readings.
- A little gravel under the resin bed is OK, but use only one type of resin in sensor systems.
To learn more about AccuSense technology options from Pentair, contact your
Pentair representative or your Preferred Distributor.
*Based on internal calculations.
13845 Bishops Dr. | Suite 200 | Brookfield, WI 53005 | United States
P: 262.238.4400 | Customer Care: 800.279.9404
tech-support@pentair.com |
pentair.com
All indicated Pentair trademarks and logos are property of Pentair.
Third party registered and unregistered trademarks and logos are
the property of their respective owners.
© 2023 Pentair All rights reserved.
4007091 SE23