SIGNATURE HARDWARE 951090-PA Ambrus Solid Brass Dummy Interior Door Octagonal Knob User Guide
- June 13, 2024
- Signature Hardware
Table of Contents
SIGNATURE HARDWARE 951090-PA Ambrus Solid Brass Dummy Interior Door
Octagonal Knob
Product Information
The product is the AMBRUS hardware kit, which includes a passage latch kit and a set of assembly screws. It is designed for use on doors with a minimum thickness of 1-3/4″ (44mm) and a maximum thickness of 2″ (50mm). The SKU numbers for the product variants are 951090-PA, 951096, and 950320-PR. The kit also includes safety glasses, a drill, a wood chisel, and a Phillips screwdriver.
Product Usage Instructions
- Before beginning the installation, it is recommended to consult a professional if you are unfamiliar with installing door hardware. Ensure that you comply with all local building codes.
- Unpack and inspect the product for any shipping damage. If any damage is found, contact the Customer Relations team via live chat at www.signaturehardware.com or by emailing support@signaturehardware.com.
- Ensure that you have gathered all the required materials for the installation.
- Confirm that your door has a bore hole drilled into it and check that your passage latch matches the door backset (2-3/8″ or 2-3/4″).
- Install the latch, making sure that the latch bolt is facing the correct direction for door opening.
- Fit and insert the spindle through the latch with the spindle on square orientation.
- Offer handles onto the spindle, ensuring that the plates are straight and square. Secure the plates with the provided screws.
If you have any additional questions or need further assistance, you can visit the Help Center at www.signaturehardware.com for product and warranty information. Alternatively, you can contact the support team through live chat or by emailing support@signaturehardware.com.
BEFORE YOU BEGIN
We recommend consulting a professional if you are unfamiliar with installing
door hardware. Signature Hardware accepts no liability for any damage to the
door, or hardware, or for personal injury during installation.
Observe all local building codes.
Unpack and inspect the product for shipping damage. If any damage is found,
contact our Customer Relations team via live chat at www.signaturehard-
ware.com or by emailing support
@signaturehard-ware.com.
GETTING STARTED
Ensure that you have gathered all the required materials that are needed for
the installation.
NOTE : This doorset works on a minimum door thickness of 1-3/4” (44mm)
and a maximum door thickness of 2” (50mm)
ADDITIONAL QUESTIONS?
Still need help? Check out our Help Center at
www.signaturehardware.com for product and
warranty information, or contact us through live chat or by emailing support
@signaturehard-ware.com.
PASSAGE INSTALLATION
TOOLS AND MATERIALS:
PASSAGE INSTALLATION
- Confirm that your door has a borehole drilled into the door. This door set works for both 2-3/8” & 2-3/4“ backsets. Please check that your passage latch matches your door backset.
- Install the latch ensuring that the latch bolt is facing the correct direction for door opening.
- Fit and insert the spindle through the latch with the spindle on square orientation.
- Offer handles onto the spindle, and ensure plates are straight and square. Secure the plates with provided screws.
PRIVACY INSTALLATION
TOOLS AND MATERIALS:
PRIVACY INSTALLATION
- Confirm that your door has a bore hole drilled into the door. This doorset works for both 2-3/8” & 2-3/4“ backsets. Please check that your privacy latch matches your door backset.
- Install latch ensuring that the latch bolt is facing the correct direction for door opening.
- Fit and insert spindle through the latch with the spindle on square orientation. Gently remove ‘O’ ring from spindle. Insert spindle into latch and then replace ‘O’ ring into slot to fix latch into place
- Offer handles onto spindle, ensure plates are straight and square. Secure the plates with provided screws. Insert privacy pin from inside plate into hole.
DUMMY INSTALLATION
TOOLS AND MATERIALS:
DUMMY INSTALLATION
- Place dummy door knob hardware in location and mark mounting holes with pencil.
- Drill pilot holes at marked locations.
- Secure dummy knob to door using provided mounting hardware.
1.855.715.1800
signaturehardware.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>