anko 42706649 Bluetooth Noise Cancelling Headphone User Manual

June 13, 2024
Anko

anko 42706649 Bluetooth Noise Cancelling Headphone User Manual

User Manual

Thank you for choosing ANKO Bluetooth Noise Cancelling Headphone. We hope you enjoy using it.

Product Specifications:

  • Model No.: 42706649
  • Version: V4.0
  • Support: A2DP, HFP, HSP, AVRCP
  • Working Distance: 10 meters
  • Talking Time: ≥8 Hours
  • Music Time: ≥8 Hours
  • Standby Time:>100 Hours
  • Charge Voltage: DC 5V
  • Battery Capacity: 300mAh
  • Charge Time: 2.5 Hours
  • Driver unit: 40 mm
  • Impedance: 32 ohms±15%
  • Sensitivity: Noise Cancelling OFF 96±3dB At 1KHz
  • Noise Cancelling ON 103±4dB At 1KHz
  • Noise cancelling: 18dB (-3dB/ +10dB at 150 Hz)
  • Frequency Range: 20Hz~20kHz

Included:

  1. Bluetooth Noise Cancelling Headphone
  2. 3.5mm Audio cable
  3. Micro USB charging cable

Overview:

Battery Charge:

This Bluetooth Noise Cancelling Headphone is powered by rechargeable Li-ion battery.
Remark: When the battery is running out, wireless / wired mode of this product will not working.
Please use the accessory USB charging cable to recharge the battery, and make sure the battery is fully charged before using this product again.

  1. Connect the USB charging cable to the headphone Micro USB charging port (7).
  2. Connect the other end of the charge cable to a powered USB device.
  3. The Charger LED Indicator (8) turns RED to show battery is charging.
  4. The Charger LED Indicator (8) turns off when battery is fully charged.
  5. It takes about 2.5 hours to fully charge the battery.

How to use this headset:

B. Paring the headphone with Bluetooth devices

  1. Make sure the headphone and your device are next to each other (within 3 feet (1 meter).

  2. Press the Power switch button (2) for 3~5 seconds to power on the headphone, when the blue LED indication is blue flashing, and the Voice prompt “Power on” then “Pairing”.

  3. Active your phone connect function and search for nearby device connections.

  4. Select “42706649” from the Bluetooth device list. In case a password is asked for, type “0000” into your external device.
    When connect success, the blue LED slowly flash and Voice prompt “connected”.

  5. If the pairing is not successful, switch off the headphone. Re-pair according to the steps above.

Note:

C. Pairing with two devices at the same time
Although you can pair with two devices, only one of them can play music or make phone calls with the headphones at any time. To pair with two devices:

  1. According the previous instruction in the “Pairing” section to pair the 42706649 with your first device.
  2. Turn off the first device connect. Then to pair the 42706649 with your second device.
  3. Turn on your first device. The headphone will auto connect your first device. Switch between the two paired devices by pausing the music on the first device and playing music on the second device.

D. Phone calls

E. Playing music

How to use the In-line control functions:
When an external device is connected to the AUX-IN socket (6) via 3.5mm AUX cable, the headphones switch automatically to the AUX-IN mode.

WARNING

  • Do not dispose of unit in fire or water.
  • Never attempt to disassemble and reassemble. Waste electrical products should not be disposed of with household waste, please recycle where facilities exist. Check with your local authority for recycle advice. • Keep your device and all accessories out of the reach of children and animals. Small parts may cause choking or serious injury if swallowed.
  • Avoid exposing your device to very cold or very hot temperatures (below 0℃ or above 45℃).
  • Extreme temperatures can cause deforming of the device and reduce the charging capacity and life of your device. • Do not allow your device to get wet-liquids can cause serious damage. Do not handle your device with wet hands.
  • The use of apparatus in moderate climates.
  • CAUTION, Danger of explosion if battery is incorrectly replaced. Battery inside is non-replaceable.
  • Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

Read More About This Manual & Download PDF:

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals