Pached Party PKCS120 Inflatable Car Pool Speaker User Guide

Pached Party PKCS120 Inflatable Car Pool Speaker User Guide

WHAT’S INSIDE THE BOX?

• A Inflatable party car
  

• B Portable wireless speaker

• C Hand pump
  

• D USB Type-C® charging cable
  

• E Quick start guide and Warranty card
  

DEVICE OVERVIEW

DEVICE OVERVIEW

Play/Pause Button

• Press to pause/play music
• Press twice fo disconnect Bluefooth® device
• Press and hold fo turn on/off

Volume Up/Next Button

• Press fo play next song
• Press twice fo pair/disconnect TWS (True Wireless Stereo) mode
• Press and hold to fun up the volume

Volume Down/Previous Button

• Press fo play previous song
• Press and hold fo lower the volume

CHARGING YOUR DEVICE

Plug the included USB Type-C® cable into the speaker’s charging port, and connect the ofher end of the cable 10 a power adapter (sold separately). Alow approximately 3 hours to fully charge the battery.

When the battery is low, the indicator light will blink red.
Once fully charged, the red light will turn off.

Note: We recommend using a USB wall adapter with a DC5V/1A output.

HOW TO INSTALL

Hook the hand pump to the car’s air valve, making sure it is fully inserted. Use the hand pump to inflate the car, and then place the speaker into its dedicated slot.

INITIAL SETUP

1. Once your speaker is fully charged, press and hold the Play/Pause button uni you hear a voice prompt in indicating the device has entered Bluetooth® paring mode.
2. On your smartphone or fablet, search for the Bluetooth® device named “Turn It Up Party Car Speaker”. Tap to connect.
3. A prompt will play once pairing s successful.

Note:

• If you turn on the speaker but do not connect to a device within 10 minutes, it will power off automatically.
• If you connect to a device but do not begin playback within 20 minutes, your device wil automatically power off.

TWS SYNC MODE

You can pair two of the same Packed Party Car Speakers together with TWS Sync Mode.

1. Press and hold the Play/Pause button on both speakers unfil the indicator light flashes blue.
2. Double press the Volume Up button on any one speaker. A voice prompt will indicate that the speakers have entered pairing mode, and the indicator light on one of the speakers will flash blue. Once the two speakers are connected, the indicator light will turn solid blue.
3. On your smartphone or tablet, search for the Bluetooth® device named “ Turn It Up Party Car Speaker”, and tap fo connect. A voice prompt wil play once successfully paired.

Note:

• In TWS mode, if you turn off one speaker, both of them will turn off.
• Double press the Volume Up button fwice to disconnect from TWS mode.

RESETTING YOUR DEVICE

If your speaker is not operating properly, you may reset it. To do so, press and hold the Play/Pause button for approximately 8 seconds until the speaker powers off, and then power it on again as usual.

SPECIFICATIONS

• Input Power: 5V 1A
• Speaker Horn Output Power: 3W RMS
• Impedance: 4Q
• Signal to Noise Ratio: = 75dB
• IPX7 Waterproof – Protected from immersion in up to 3 feet of water for 30 minutes
• Built-in rechargeable battery
• Range 33ff(10m)
• Frequency Response: 150Hz-13KHz
• TWS Sync Mode (True Wireless Stereo)
• Up to 7 hours of playtime at 50% volume:

NEED HELP?

For customer support regarding your device, please submit arequest by emailing suppori@dpaudiovideo.zendesk.com. You wil be provided a ficket number regarding your inquiry, which
‘you can refer fo when contacting us further.

You may also reach a DPAV customer service representative by calling 1-833-909-2673. We are available Monday – Friday, 9am – 5pm PST, except major holidays. DPAV strongly urges customers to email their inquiry prior to calling, as this will enable Us o better assist you.

Please make sure to note the model number and a description of your inquiry.

Thank you for purchasing a Packed Party product.

FCC WARNING

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two condifions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been fested and found fo comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed o provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occurin a parficular installation, I this equipment does cause: harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged fo try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dedler or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>