CHENSIVE V5 3 Channel Dash Cam User Manual

June 13, 2024
CHENSIVE

CHENSIVE V5 3 Channel Dash Cam User Manual
CHENSIVE V5 3 Channel Dash Cam

Product Specification

| DDR| Built-in 64M
---|---|---
| FLASH| 8M SPI norflash
| Display Screen| 4.0 inch IPS HD screen
| LCD resolution| 2K
| External port| MINI USB 5V/2A power adapter port
| Max support 32G Class10 TF card
| 2.5mm digital 1080P rear view lens port
| Speaker| Monophonic 15*10mm speaker
| MIC| Built-in 64M
| Features
| Front camera| 6-glass/F2.0aperture/170°wide angle
| Inside camera(optional)| VGA 120°
| GPS tracker| NO
| AV OUT| NO
| Rear camera| 6M cable/2.5mm port
| Photo| Support
| Lens rotates| Adjust manually
| WDR| Support
| HDR| Support
| Reversingvisual| Support
| Video format| AVI
| Image format| JPG
| Compressionformat| H.264
| Battery| 320mAh polymer lithium battery
| Language| support multi-language
| G-sensor| Support
| Motion Detection| Support
| Delay shutdown| Support
| Loop recording| Support,Do not leak seconds
| Sound record| Support
| Fill light for nightvision| Support(Open manually)
| Parking monitoring| Support
| Front camera| Max 2K
| In-car cameraresolution| 1080P
| Camera resolution| Max support 3M
Working Environment
Operatingterkperature| -40°C~70°C
Operating humidity| 15-65%RH
Storagetemperature| -40°C~70°C

Key Features (picture for reference only, mainly in kind)

Product Overawe

  1. Power key
  2. Confirm key
  3. Scroll down key
  4. Menu / photo / playback key
  5. Up key
  6. Front Camera
  7. Courtesy lights
  8. Reset key
  9. Bracket opening
  10. Power interface
  11. Display screen
  12. TF card slot
  13. Rear camera interface
  14. Interior camera

[PWR ] Power button, short press to turn on off screen, long press to switch on/ off the device. [MENU ] Menu / camera / playback button

Press [OK] key to stop recording, press [ MENU ] to enter photo mode, press [OK] to take photo; In the camera mode, press [ MENU 】to enter playback mode, press [ OK] key to playback. Lock function: In case of video recording, short press [ MENU 】for a key lock function to protect the current video file, and this file will not be covered by the cycle video In video mode ,long press {MENU】 to enter video menu settings as fool

Recorder Menu

1| Resolution| 1080PFHD/720P/VGA|
2| Loop recording| Off/1minutes/2minutes3minutes|
3| High dynamicrange HDR| on/ off| Improved image quality, Better visual effect
4| Exposure compensation| -3.-2.-1.0.1.2.3| Support
5| Motion deflection| on/ off| In standby made, it will automatically record while an objective moves
6| Sound record| on/ off| Turn on/off sound record
7| Time stamp| on/ off|
8| Car number| on/ off|
9| G-sensor| High/Medium Low Sensitivity| When a car occur collision accident, it will lock current video and can’t be covered
10| Parking monitor| on/ off| unattended surveillance
11| Date/time| Adjustment Years months date/nous Minutes seconds|
12| Automatics hut-down| Off/3minutes/5minutes10 minutes|
13| keypad tone| on/ off|
14| OSD language| Support multilingual| Choose a language
15| Light source frequency| 50 HZ/60 HZ| Choose the Light source frequency
16| format| Confirm/ cancel| format TF card
17| Screen saver| Off/30seconds/1 minute /2minutes|
18| Default setting| Default setting|
19| version| Machine software version number| Choose a language

{DOWN} Down key, short press [DOWN] to select function at the Menu interface, short press button to turn on, and off the sound record at the shooting interface. 【Urdu key. 1. short press 【Orto select function al the Menu interface

  1. In case of video recording, short press OK button to pause, then short press 【UR] button to switch front inside view image (require inside view lens)
  2. long press 【UR】button to switch front-rear View image
  3. In case of front-rear view image, short press OK button to pause, then short press 【UR】

button to switch front-rear view image (require rear view lens) 【OK】Confirm button, short press to confirm in the menu interface, short press to video record on/off in the video mode.

Rea rview lens (optional)
In case of video recording, 4 pin plug of the rear view lens inserts AV-in hole of the device. there’s a rear view image in top right of the screen, which means connected successfully; short press OK button to pause, long press 【UR】button switch front-rear view image, When hang up “R” gear, it will show full image of rear view

Note: This device can only support dual cameras to video record at the same time instead of 3 channels camera, that is front-inside camera or front- rear camera; if installed a rearview camera and choose the front-inside view mode, it will automatically indicate the full image of car reversing visual when you hang up “R” gear, but won’t affect front-inside video record, also will automatically switch back front-inside view after cancel “R” gear. As for the system update to support 3 channels of camera to video record at the same time, please prevail in kind and we’re sorry for no further notice.

How to install the front camera?

( Please install the camera after turning off the car engine)

  1. Install the driving recorder on the glass near the rear-view mirror.
  2. Connect the power cord to the machine and plug the cord at the intersection of the ceiling and the glass.
  3. Go down the power cord along the seam of the A-pillar.
  4. Run the power cord along the door seam to the bottom of the storage box.
  5. Run the power cord along the bottom of the storage box towards the cigarette lighter and insert the cigarette lighter plug into the cigarette lighter hole.

How to Installations

Here are some suggestions for installing the dash cam? Features

  1. It should be installed near the rear-view mirror of the car, but not obstructing the driver’s view.
  2. Make sure that the lens is within the range of the windshield wipers so that the video can monitor road conditions clearly when it rains.
  3. Please not touch the lens with your fingers, to prevent fingerprints from affecting the clarity of the video.
  4. If you need to remove the suction cup holder from the windshield, be careful as it may damage the adhesive and cause the dash cam to fall off.

How to install the rear camera?

Note: please ensure that the view of the rear camera is normal before installing your rear camera. The length of the rear camera cable is 18ft, supporting car and SUV for five seats.

There are two installation methods

  1. The rear camera is installed above the inner of the rear windshield. ( It can be installed by yourself, the reversing visual function cannot be achieved, and it can only record rear videos)

  2. The rear camera is installed above the license plate frame by a professional or yourself. And connect the camera to the reversing light power supply, which can achieve the reversing visual function. (The red power wire on the rear camera can be connected to the reversing light power supply.)

Features

  1. Use the automatic recording function
    Start the car engine, the recorder automatically starts to open the recording function. Close the car engine, The recorder automatically saves the contents of the log and shuts down, recorded video segments are stored on the TF card. When the TF card is full, the recorder will overwrite the oldest recorded image preferentially.
    [Note]
    a. Time segment of record can be set 1/2/3 minutes in the menu .
    b. The video individually saved in the folder named “DCIMA” and “DCIMB” in TF card (package include rear view lens)

  2. Use motion detection
    In standby mode, enter the menu screen open the motion detection mode. When the lens is sensitive to the peripheral area of a moving object, the state machine into the camera, recording 30 seconds after the system stops recording. To exit the motion detection mode, in standby mode to enter the menu screen close motion detection mode.

  3. G-sensor
    The built-in gravity sensor (G-sensor), if serious vehicle collision, the recorder will lock the first 5 seconds and 10 seconds after the image date when the accident occurred while the bottom left of the display screen displays a lock icon; locked images will be saved as a special file, the file will not be overwritten cycle. (note) Gravity sensor (G-Sensor)sensitivity adjustment support may actually

  4. The device has a key lock feature that will need to retain an image without being locked loop overwritten. In the video mode, short press 【MENU】key logger will then lock the entire video image.

  5. In shooting mode, Press the【MENU】key to enter the menu setting, find the date/time menu, short press the【OK】button to confirm and return to the setup menu settings, and press the 【MENU】key to exit the menu setting. 【note】In order to effectively record the date and time of traffic safety accident forensics, before using the menu setting.

  6. File playback
    In the playback mode, press the (OK} key to play back. To exit playback mode, press MODE button again.

  7. Reversing visual functionFirst, you must connect the dvr with car charger, rear-view camera connect the reversing lights. Insert the car charger, machine will automatically start recording status, screen switch R position in the recording mode automatically switches to the rear-view camera, display reverse image. After reversing visual machine automatically return to video mode. Reminder: Please test the rearview camera is normal before installation.

  8. Parking monitor(To achieve unattended surveillance video)
    To achieve this function must be connected to the machine in the case of electricity, in the main menu to open the motion detection and parking monitoring function, in the standby state of the vehicle under vibration or moving objects in front, the recorder according to G-sensor to sense automatically start the machine and automatically locks the video for 30 seconds, and automatically save the video file, the video 30 seconds after 5 seconds without the operation will automatically shut down. [note] This function is only used when stopping. Please turn off the motion detection and stop monitoring function during normal driving.

FAQ

Machine appears “file error” message| Settings menu -> Restore factory settings and format the memory card, the general problem is the Tr card
The screen appears horizontal stripes interference| Please select the correct power supply frequency SOHZ(PAL)
How to properly turn on the 24-hour parking monitoring function| While normal driving, please do not open is easily lead to automatic shutdown or crash, after parking is requires to open, configure the buck line or mobile power, please
Night shooting screen is not clear enough| Recorder shooting depends on the outside strong light source( such as streetlights or car light)
The machine always reverts to the default date and time| Shutdown in the first case full of electricity, you can use car charger or mobile power supply to add power
what is the reason for video file leak seconds| (Turn off motion detection, Turn on the loop recording function) With a certain choice of their own genuine
Why during recording, the machine automatically shut down suddenly| Please turn off the parking monitoring function first/Ambient temperature exceeds 70 °C will cause
【Note】Practice proof| Most of the sources of the problem from the memorycard and a small part is caused by the power cord

The information provided in this manual is for reference only. Please prevail in kind (some special features depend on different models) . All right reserved.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

CHENSIVE User Manuals

Related Manuals