SOMTLERK A221 Smart Watch User Manual

SOMTLERK A221 Smart Watch User Manual

SMART WATCH
Your Fitness Tracker

User Manual

Press and hold the side power button to turn on the watch

Note: For first use, please charge the watch for 5 minutes, or it may not be turned on. And it takes about 2 hours to fully charge the watch.

Download App

Power on – Click to select the language – Scan the QR code of the watch – Download “GloryFit” app
For iOS: Apple App Store
For Android: Google Play Store

Pair with Watch

1. Open the app, register and log in to your account.
2. Click the third small icon “Device” at the bottom of the page – Click “Add a new device” – Click in the upper right corner – Scan the QR code on the watch (Settings – QR Code) – on the App “A221 (ID-****) would like to pair with your phone.” that pops up, select “Pair” – to achieve a successful connection (Bluetooth Name: A221)

Note:

1. Turn on the Bluetooth on the mobile phone.
2. Reset the watch when no Bluetooth signal found.
3. Need to enter the app to pair the watch, cannot connect to the Bluetooth in the phone settings.
4. When the Bluetooth is successfully connected, the main interface pulls down and the sign in the upper left corner is on, if there is no connection, the sign in the upper left corner is a gray state.
5. Click the third small icon “Device” at the bottom of the page – Click “More settings” – Click “Device language” to set the language of the watch.

Basic Operation

1. Swipe Down to access quick settings.

Note: Turn on call audio, in the upper left corner is on, can answer and dial calls.
If in the upper left corner is a gray state,

1. Click to turn off call audio, then turn it on again, and check on.
2. Need to find “Settings” on the mobile phone – Click “Bluetooth” – Find the Bluetooth name of the watch “A221”- Click to connect

2. Swipe Up to enter message interface.

3. Swipe Right to enter recently used menu interface.

4. Swipe Left to enter daily exercise, sleep, heart rate, blood oxygen, weather interface.

5. When the screen is on, press the side button to enter menu interface.

6. Press and hold the main interface to select the watch face.

7. Single click the side button can back to the previous interface.

8. Press and hold the side button for about 3 seconds to shut down.

Setting Mode

Choose “Dial” and “Theme”, and click the side button to return to the previous interface

Set “Vibration” intensity, turn on “Media audio” and turn on “Mute” mode.
Note: When turning on media audio, the watch can sync all sound playback of mobile phone, such as voice assistant and music playback.

Set the brightness and screen time.

Turn on/off “Raise to wake”.

Set “Password Switch”, when forgetting password, please reset the watch to factory settings in the mobile APP.

Set the start time and end time of “Do not disturb” mode.

Scan to connect to the watch or download the APP.

“Reboot”, “Power off”, “Reset” the watch.

Check “Device name”, “Device version”, “Bluetooth address”.

Press the side button to enter the menu to see more functions when the

screen is on

You can select “Contacts” or use “Dial Pad” to dial calls. And you can check “Call Logs” on the watch.
Note: Click to hang up, click to adjust the volume, click to turn on/off microphone. The other party can hear you when the microphone is on, but cannot hear you when the microphone is off.
Contact Person setting
Open the app – Click the third small icon “Device” at the bottom – Click “Bluetooth Call” – Click “Sync Contacts” – Click “Open” – on the App GloryFit” Would Like to Access Your Contacts that pops up and select “OK” to sync contacts to the watch.

Swipe down on the interface can check “Calories”, “Distance”, “Steps” (Step details and Weekly data).

Monitor heart rate, and slide down on the interface to view heart rate change chart for a week
Note: To view the 24-hour real-time heart rate change graph, open the app and find the third small icon “Device” at the bottom of the page – Click “Heart rate settings” – Turn on “Automatic” and “Maximum heart rate reminder” when the heart rate is more than this value, the device will vibrate to remind you.

Choose a training mode, swipe down on the interface to view training time, heart rate, steps, calories, etc., swipe right to continue/exit training mode, swipe left to enter music control interface.

Monitor blood oxygen and view the 24-hour blood oxygen change graph, open the app and find the third small icon “Device” at the bottom of the page – Click “Blood oxygen setting” – Turn on “Automatic setting” and set “Time period” and “Cycle”.

Monitor sleep data, slide down on the interface to view deep sleep, light sleep, awake time, and REM(rapid eye movement).

Check the weather, swipe down on the interface to view future weather for next three days.

Click “+” to choose “Time” and ‘Repeat”, and swipe right on the interface to save the alarm clock after setting.

Click to wake up the voice assistant
Note: Need to turn on “Media audio” on Settings of the watch.

Open the app – Click the third small icon “Device” at the bottom – Click “SOS Contact” to set

Open the app – Click the fourth small icon “Profile” at the bottom – Click “Physiological cycle” to set reminders
Note: When registering an account, the gender must be female.
Open the app – Click the fourth small icon “Profile” at the bottom – Click on the avatar to set personal information

Open the app – Click the third small icon “Device” at the bottom – Click “More settings” – Click “Shake to take picture” to enter photograph function

Open the app – Click the third small icon “Device” at the bottom – Turn on message notification
Note: The watch cannot reply text messages.

Charge

For charging, please place the watch flat, and make sure the metal holes on the back are aligned with the metal tip of the charging head (charging contact spacing: 4mm).

Note:

1. The rated voltage of the charging head is 5V/0.5A.
2. Please do not use the vehicle power supply to charge, to avoid causing the charging cable to age or burn out due to the unstable voltage.

Replace the watchband

Slide the switch of the watchband, and replace the same specification (watchband width: 22mm).

Precautions

1. Please clean your watch regularly.
2. Please do not wear it too tight to avoid discomfort.
3. Please do not use for swimming. When getting wet, be sure to dry the water on the watch before operating.

Specifications

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>